Nagios Support Forum

Hello,

We have XI 5.2.2.

I'm running the Network Switch / Router wizard and it is not picking up a couple of ports we are interested in monitoring. I do see the ports when I run snmpwalk and these ports that are not showing up in this Wizard have both ifAdminStatus and ifOperStatus as up. Note: We have about 150 devices our Nagios environment.

Any idea why these wouldn't show up in the wizard?

Here are the port descriptions via snmpwalk.
IF-MIB::ifDescr.9 = STRING: T1 0/0/0
IF-MIB::ifDescr.10 = STRING: T1 0/0/1
IF-MIB::ifDescr.11 = STRING: T1 0/1/0
IF-MIB::ifDescr.12 = STRING: T1 0/1/1

Speed....
IF-MIB::ifSpeed.9 = Gauge32: 1544000
IF-MIB::ifSpeed.10 = Gauge32: 1544000
IF-MIB::ifSpeed.11 = Gauge32: 1544000
IF-MIB::ifSpeed.12 = Gauge32: 1544000


Thx

In the Nagios XI GUI, can you go to the Admin > Manage Config Wizards menu, click in the Check for Updates button and upgrade the Network Switch / Router wizard to the latest version (Version 2.3.2) and try the Wizard again to see if that resolves the issue.