Nagios Support Forum

Posted: **Wed Oct 26, 2011 7:04 am**

Not really sure where to ask this, but I do it here. Can anyone explain to me why these are different?

[nagios@klodrik:~]$ /usr/lib/nagios/plugins/check_nrpe -H 10.0.1.2 -p 5567 -t 40 -u -c check_disk_c0d0p4 ; echo $?
Timeout while attempting connection
2
[nagios@klodrik:~]$ /usr/lib/nagios/plugins/check_nrpe -H 10.0.1.2 -p 5567 -t 20 -u -c check_disk_c0d0p4 ; echo $?
CHECK_NRPE: Socket timeout after 20 seconds.
3
[nagios@klodrik:~]$ /usr/lib/nagios/plugins/check_nrpe -H 10.0.1.2 -p 5567 -t 20 -u -c check_disk_c0d0p4 ; echo $?
CHECK_NRPE: Socket timeout after 20 seconds.
3
[nagios@klodrik:~]$ /usr/lib/nagios/plugins/check_nrpe -H 10.0.1.2 -p 5567 -t 40 -u -c check_disk_c0d0p4 ; echo $?
Timeout while attempting connection
2

10.0.1.2 is blackhole route, and the result of the plugin seems to be dependent on the timeout. I think they both should
return 3, when -u is specified?

State of my system:

[root@klodrik:~]# cat /etc/debian_version
6.0.3
[root@klodrik:~]# dpkg -l nagios\*
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Description
+++-=======================================-=======================================-==============================================================================================
ii nagios-images 0.7 Collection of images and icons for the nagios system
un nagios-nrpe-doc <none> (no description available)
ii nagios-nrpe-plugin 2.12-4 Nagios Remote Plugin Executor Plugin
un nagios-nrpe-server <none> (no description available)
ii nagios-plugins 1.4.15-3squeeze1 Plugins for the nagios network monitoring and management system
ii nagios-plugins-basic 1.4.15-3squeeze1 Plugins for the nagios network monitoring and management system
ii nagios-plugins-standard 1.4.15-3squeeze1 Plugins for the nagios network monitoring and management system
ii nagios3 3.2.1-2 A host/service/network monitoring and management system
ii nagios3-cgi 3.2.1-2 cgi files for nagios3
ii nagios3-common 3.2.1-2 support files for nagios3
ii nagios3-core 3.2.1-2 A host/service/network monitoring and management system core files
un nagios3-doc <none> (no description available)
ii nagiosgrapher 1.7.1-2+deb60u1 Charting add-on for Nagios
[root@klodrik:~]#

Posted: **Wed Oct 26, 2011 5:14 pm**

Check the nrpe.cfg on your NRPE daemon to see if connection or command timeout is set to 30 seconds. The difference would be at 20 seconds the script is saying it has timed out and therefor the state is unknown, however if it hits 30 seconds the NRPE daemon is telling it that it is taking too long and returning a critical state to the script.

You should also check the max command timeout in your Nagios configuration as well because the default is 30 seconds.

Posted: **Thu Oct 27, 2011 2:32 am**

Aha, that sounds like a possible scenario. I will do that. Thanks a lot!

Nagios Support Forum

check_nrpe: -u not working correctly?

check_nrpe: -u not working correctly?

Re: check_nrpe: -u not working correctly?

Re: check_nrpe: -u not working correctly?