Nagios Support Forum

Code: Select all

## See the nxlog reference manual at 
## http://nxlog.org/nxlog-docs/en/nxlog-reference-manual.html
 
## Please set the ROOT to the folder your nxlog was installed into,
## otherwise it will not start.
#define ROOT C:\Program Files\nxlog
define ROOT C:\Program Files (x86)\nxlog
define CERT %ROOT%\cert
 
Moduledir %ROOT%\modules
CacheDir %ROOT%\data
Pidfile %ROOT%\data\nxlog.pid
SpoolDir %ROOT%\data
LogFile %ROOT%\data\nxlog.log
 
# Include fileop while debugging, also enable in the output module below
#<Extension fileop>
#    Module xm_fileop
#</Extension>
 
<Extension json>
    Module      xm_json
</Extension>
 
<Extension syslog>
    Module xm_syslog
</Extension>
 
<Input internal>
    Module im_internal
</Input>
 
# Watch your own files
<Input file1>
    Module   im_file
    File     '%ROOT%\data\nxlog.log'
    SavePos  TRUE
    Exec     $Message = $raw_event;
</Input>
 
# Windows Event Log
<Input eventlog>
# Uncomment im_msvistalog for Windows Vista/2008 and later
    Module im_msvistalog
 
# Uncomment im_mseventlog for Windows XP/2000/2003
#   Module im_mseventlog
</Input>

<Output out>
    Module om_tcp
    Host 10.2.8.74
    Port 3515
	
    Exec  $tmpmessage = $Message; delete($Message); rename_field("tmpmessage","message");
    Exec  $raw_event = to_json();
	
	# Uncomment for debug output
	# Exec file_write('%ROOT%\data\nxlog_output.log', $raw_event + "\n");
</Output>
 
<Route 1>
    Path internal, file1, eventlog => out
</Route>