Nagios Support Forum

Code: Select all

broker_module=/usr/local/nagios/bin/ndomod.o config_file=/usr/local/nagios/etc/ndomod.cfg

Code: Select all

#loadctl_options=jobs_max=100;backoff_limit=10;rampup_change=5
# Load Livestatus Module
#broker_module=/usr/lib/check_mk/livestatus.o /var/log/nagios/rw/live
#event_broker_options=-1
# added by setup.sh of check_mk
cfg_dir=/usr/local/nagios/etc/check_mk.d
# Load Livestatus Module
#broker_module=/usr/lib/check_mk/livestatus.o /var/log/nagios/rw/live
# added by setup.sh of check_mk
cfg_dir=/etc/nagios/check_mk.d

#NDOUtils Broker Module
event_broker_options=-1
broker_module=/usr/local/nagios/bin/ndomod.o config_file=/usr/local/nagios/etc/ndomod.cfg

#Conf. ndomod.cfg

#####################################################################
# NDOMOD CONFIG FILE
#
# Last Modified: 09-05-2007
#####################################################################


# INSTANCE NAME
# This option identifies the "name" associated with this particular
# instance of Nagios and is used to seperate data coming from multiple
# instances.  Defaults to 'default' (without quotes).

instance_name=default



# OUTPUT TYPE
# This option determines what type of output sink the NDO NEB module
# should use for data output.  Valid options include:
#   file       = standard text file
#   tcpsocket  = TCP socket
#   unixsocket = UNIX domain socket (default)

#output_type=file
#output_type=tcpsocket
output_type=unixsocket



# OUTPUT
# This option determines the name and path of the file or UNIX domain
# socket to which output will be sent if the output type option specified
# above is "file" or "unixsocket", respectively.  If the output type
# option is "tcpsocket", this option is used to specify the IP address
# of fully qualified domain name of the host that the module should
# connect to for sending output.

#output=/usr/local/nagios/var/ndo.dat
#output=127.0.0.1
output=/usr/local/nagios/var/ndo.sock



# TCP PORT
# This option determines what port the module will connect to in
# order to send output.  This option is only valid if the output type
# option specified above is "tcpsocket".

tcp_port=5668



# ENCRYPTION
# This option determines if the module will use SSL to encrypt the
# network traffic between module and ndo2db daemon.
# Both sides have to enable this feature which depends on SSL Libraries
# like openssl or kerberos
# This option is only valid if the output type
# option specified above is "tcpsocket".
#
# A value of '1' will enable this feature

use_ssl=0



# OUTPUT BUFFER
# This option determines the size of the output buffer, which will help
# prevent data from getting lost if there is a temporary disconnect from
# the data sink.  The number of items specified here is the number of
# lines (each of variable size) of output that will be buffered.

output_buffer_items=5000



# BUFFER FILE
# This option is used to specify a file which will be used to store the
# contents of buffered data which could not be sent to the NDO2DB daemon
# before Nagios shuts down.  Prior to shutting down, the NDO NEB module
# will write all buffered data to this file for later processing.  When
# Nagios (re)starts, the NDO NEB module will read the contents of this
# file and send it to the NDO2DB daemon for processing.

buffer_file=/usr/local/nagios/var/ndomod.tmp



# FILE ROTATION INTERVAL
# This option determines how often (in seconds) the output file is
# rotated by Nagios.  File rotation is handled by Nagios by executing
# the command defined by the file_rotation_command option.  This
# option has no effect if the output_type option is a socket.

file_rotation_interval=14400



# FILE ROTATION COMMAND
# This option specified the command (as defined in Nagios) that is
# used to rotate the output file at the interval specified by the
# file_rotation_interval option.  This option has no effect if the
# output_type option is a socket.
#
# See the file 'misccommands.cfg' for an example command definition
# that you can use to rotate the log file.

#file_rotation_command=rotate_ndo_log



# FILE ROTATION TIMEOUT
# This option specified the maximum number of seconds that the file
# rotation command should be allowed to run before being prematurely
# terminated.

file_rotation_timeout=60



# RECONNECT INTERVAL
# This option determines how often (in seconds) that the NDO NEB
# module will attempt to re-connect to the output file or socket if
# a connection to it is lost.

reconnect_interval=15



# RECONNECT WARNING INTERVAL
# This option determines how often (in seconds) a warning message will
# be logged to the Nagios log file if a connection to the output file
# or socket cannot be re-established.

reconnect_warning_interval=15
#reconnect_warning_interval=900



# DATA PROCESSING OPTIONS
# These options determine what data the NDO NEB Module will process
#
acknowledgement_data=1
adaptive_contact_data=1
adaptive_host_data=1
adaptive_program_data=1
adaptive_service_data=1
aggregated_status_data=1
comment_data=1
contact_status_data=1
downtime_data=1
event_handler_data=1
external_command_data=1
flapping_data=1
host_check_data=1
host_status_data=1
log_data=1
main_config_data=1
notification_data=1
object_config_data=1
process_data=1
program_status_data=1
retention_data=1
service_check_data=1
service_status_data=1
state_change_data=1
system_command_data=1
timed_event_data=1


# CONFIG OUTPUT OPTION
# This option determines what types of configuration data the NDO
# NEB module will dump from Nagios.  Values can be OR'ed together.
# Values:
#         0 = Don't dump any configuration information
#         1 = Dump only original config (from config files)
#         2 = Dump config only after retained information has been restored
#         3 = Dump both original and retained configuration

config_output_options=2

Code: Select all

#####################################################################
# NDO2DB DAEMON CONFIG FILE
#
# Last Modified: 01-02-2009
#####################################################################



# LOCK FILE
# This is the lockfile that NDO2DB will use to store its PID number
# in when it is running in daemon mode.

lock_file=/usr/local/nagios/var/ndo2db.pid



# USER/GROUP PRIVILIGES
# These options determine the user/group that the daemon should run as.
# You can specify a number (uid/gid) or a name for either option.

ndo2db_user=nagios
ndo2db_group=nagios



# SOCKET TYPE
# This option determines what type of socket the daemon will create
# an accept connections from.
# Value:
#   unix = Unix domain socket (default)
#   tcp  = TCP socket

socket_type=unix
#socket_type=tcp



# SOCKET NAME
# This option determines the name and path of the UNIX domain
# socket that the daemon will create and accept connections from.
# This option is only valid if the socket type specified above
# is "unix".

socket_name=/usr/local/nagios/var/ndo.sock



# TCP PORT
# This option determines what port the daemon will listen for
# connections on.  This option is only vlaid if the socket type
# specified above is "tcp".

tcp_port=5668



# ENCRYPTION
# This option determines if the ndo2db daemon will accept SSL to encrypt the
# network traffic between module and ndo2db daemon.
# Both sides have to enable this feature which depends on SSL Libraries
# like openssl or kerberos
# This option is only valid if the output type
# option specified above is "tcpsocket".
#
# A value of '1' will enable this feature

use_ssl=0



# DATABASE SERVER TYPE
# This option determines what type of DB server the daemon should connect to.
# Values:
#   mysql = MySQL

db_servertype=mysql



# DATABASE HOST
# This option specifies what host the DB server is running on.

db_host=localhost



# DATABASE PORT
# This option specifies the port that the DB server is running on.
# Values:
#  3306 = Default MySQL port

db_port=3306



# DATABASE SOCKET
# This option specifies the path to the socket to use for local DB connections.
#
# MySQL's default location is /tmp/mysql.sock, but /var/lib/mysql/mysql.sock
# is common for RPM distributions, and /var/run/mysqld/mysqld.sock is seen on
# Ubuntu...
#
# You normally do not need to set this option unless you experience connection
# problems with messages in NDO2DB's log like:
#   "Can't connect to local MySQL server through socket ..."

#db_socket=/var/lib/mysql/mysql.sock



# DATABASE NAME
# This option specifies the name of the database that should be used.

db_name=nagios



# DATABASE TABLE PREFIX
# Determines the prefix (if any) that should be prepended to table names.
# If you modify the table prefix, you'll need to modify the SQL script for
# creating the database!

db_prefix=nagios_



# DATABASE USERNAME/PASSWORD
# This is the username/password that will be used to authenticate to the DB.
# The user needs at least SELECT, INSERT, UPDATE, and DELETE privileges on
# the database.

db_user=ndoutils
db_pass=SanMartin2o16



## TABLE TRIMMING OPTIONS
# Several database tables containing Nagios event data can become quite large
# over time.  Most admins will want to trim these tables and keep only a
# certain amount of data in them.  The options below are used to specify the
# age (in MINUTES) that data should be allowd to remain in various tables
# before it is deleted.  Using a value of zero (0) for any value means that
# that particular table should NOT be automatically trimmed.

# Keep timed events for 24 hours
max_timedevents_age=1440

# Keep system commands for 1 week
max_systemcommands_age=10080

# Keep service checks for 1 week
max_servicechecks_age=10080

# Keep host checks for 1 week
max_hostchecks_age=10080

# Keep event handlers for 31 days
max_eventhandlers_age=44640

# Keep external commands for 31 days
max_externalcommands_age=44640

# Keep notifications for 31 days
max_notifications_age=44640

# Keep contactnotifications for 31 days
max_contactnotifications_age=44640

# Keep contactnotificationmethods for 31 days
max_contactnotificationmethods_age=44640

# Keep logentries for 90 days
max_logentries_age=129600

# Keep acknowledgements for 31 days
max_acknowledgements_age=44640



# DEBUG LEVEL
# This option determines how much (if any) debugging information will
# be written to the debug file.  OR values together to log multiple
# types of information.
# Values: -1 = Everything
#          0 = Nothing
#          1 = Process info
#          2 = SQL queries

debug_level=0



# DEBUG VERBOSITY
# This option determines how verbose the debug log out will be.
# Values: 0 = Brief output
#         1 = More detailed
#         2 = Very detailed

debug_verbosity=1



# DEBUG FILE
# This option determines where the daemon should write debugging information.

debug_file=/usr/local/nagios/var/ndo2db.debug



# MAX DEBUG FILE SIZE
# This option determines the maximum size (in bytes) of the debug file.  If
# the file grows larger than this size, it will be renamed with a .old
# extension.  If a file already exists with a .old extension it will
# automatically be deleted.  This helps ensure your disk space usage doesn't
# get out of control when debugging.

max_debug_file_size=1000000

Code: Select all

debug_level=0

Code: Select all

debug_level=-1

Code: Select all

service ndo2db restart

Code: Select all

ps -ef --cols=300
echo 'show tables;' | mysql  -t -u ndoutils -pSanMartin2o16 nagios

Code: Select all

UID        PID  PPID  C STIME TTY          TIME CMD
root         1     0  0 oct28 ?        00:00:28 /sbin/init
root         2     0  0 oct28 ?        00:00:00 [kthreadd]
root         3     2  0 oct28 ?        04:46:27 [ksoftirqd/0]
root         5     2  0 oct28 ?        00:00:00 [kworker/0:0H]
root         7     2  0 oct28 ?        04:29:07 [rcu_sched]
root         8     2  0 oct28 ?        00:00:00 [rcu_bh]
root         9     2  0 oct28 ?        00:00:02 [migration/0]
root        10     2  0 oct28 ?        00:01:19 [watchdog/0]
root        11     2  0 oct28 ?        00:00:44 [watchdog/1]
root        12     2  0 oct28 ?        00:00:02 [migration/1]
root        13     2  0 oct28 ?        03:43:53 [ksoftirqd/1]
root        15     2  0 oct28 ?        00:00:00 [kworker/1:0H]
root        16     2  0 oct28 ?        00:00:47 [watchdog/2]
root        17     2  0 oct28 ?        00:00:09 [migration/2]
root        18     2  0 oct28 ?        04:02:03 [ksoftirqd/2]
root        20     2  0 oct28 ?        00:00:00 [kworker/2:0H]
root        21     2  0 oct28 ?        00:00:34 [watchdog/3]
root        22     2  0 oct28 ?        00:00:09 [migration/3]
root        23     2  0 oct28 ?        04:40:48 [ksoftirqd/3]
root        25     2  0 oct28 ?        00:00:00 [kworker/3:0H]
root        26     2  0 oct28 ?        00:00:00 [khelper]
root        27     2  0 oct28 ?        00:00:00 [kdevtmpfs]
root        28     2  0 oct28 ?        00:00:00 [netns]
root        29     2  0 oct28 ?        00:00:01 [khungtaskd]
root        30     2  0 oct28 ?        00:00:00 [writeback]
root        31     2  0 oct28 ?        00:00:00 [ksmd]
root        32     2  0 oct28 ?        00:00:00 [khugepaged]
root        33     2  0 oct28 ?        00:00:00 [crypto]
root        34     2  0 oct28 ?        00:00:00 [kintegrityd]
root        35     2  0 oct28 ?        00:00:00 [bioset]
root        36     2  0 oct28 ?        00:00:00 [kblockd]
root        41     2  0 oct28 ?        00:00:00 [kswapd0]
root        42     2  0 oct28 ?        00:00:00 [vmstat]
root        43     2  0 oct28 ?        00:00:00 [fsnotify_mark]
root        49     2  0 oct28 ?        00:00:00 [kthrotld]
root        50     2  0 oct28 ?        00:00:00 [ipv6_addrconf]
root        52     2  0 oct28 ?        00:00:00 [deferwq]
root        92     2  0 oct28 ?        00:00:00 [acpi_thermal_pm]
root        93     2  0 oct28 ?        00:00:00 [cciss_scan]
root        94     2  0 oct28 ?        00:00:00 [khubd]
root        95     2  0 oct28 ?        00:00:00 [kpsmoused]
root        96     2  0 oct28 ?        00:00:00 [ata_sff]
root        97     2  0 oct28 ?        00:00:00 [scsi_eh_0]
root        98     2  0 oct28 ?        00:00:00 [scsi_tmf_0]
root        99     2  0 oct28 ?        00:00:00 [scsi_eh_1]
root       100     2  0 oct28 ?        00:00:00 [scsi_tmf_1]
root       105     2  0 oct28 ?        00:00:00 [scsi_eh_2]
root       106     2  0 oct28 ?        00:00:00 [scsi_tmf_2]
root       109     2  0 oct28 ?        00:06:03 [kworker/0:1H]
root       110     2  0 oct28 ?        00:04:39 [kworker/2:1H]
root       111     2  0 oct28 ?        00:05:59 [kworker/1:1H]
root       113     2  0 oct28 ?        00:05:00 [kworker/3:1H]
root       138     2  0 oct28 ?        00:03:42 [jbd2/cciss!c0d0]
root       139     2  0 oct28 ?        00:00:00 [ext4-rsv-conver]
root       169     2  0 oct28 ?        00:00:00 [kauditd]
root       177     1  0 oct28 ?        00:00:00 /lib/systemd/systemd-udevd
root       179     1  0 oct28 ?        00:04:13 /lib/systemd/systemd-journald
root       218     2  0 oct28 ?        00:00:00 [edac-poller]
root       229     2  0 oct28 ?        00:00:00 [ttm_swap]
root       240     2  0 oct28 ?        00:00:00 [radeon-crtc]
root       266     2  0 oct28 ?        00:00:00 [jbd2/cciss!c0d0]
root       267     2  0 oct28 ?        00:00:00 [ext4-rsv-conver]
root       431     1  0 oct28 ?        00:00:02 /sbin/rpcbind -w
statd      440     1  0 oct28 ?        00:00:00 /sbin/rpc.statd
root       445     2  0 oct28 ?        00:00:00 [rpciod]
root       447     2  0 oct28 ?        00:00:00 [nfsiod]
root       454     1  0 oct28 ?        00:00:00 /usr/sbin/rpc.idmapd
root       455     1  0 oct28 ?        00:00:30 /usr/sbin/cron -f
daemon     456     1  0 oct28 ?        00:00:00 /usr/sbin/atd -f
root       457     1  0 oct28 ?        00:00:04 /usr/sbin/sshd -D
root       459     1  0 oct28 ?        00:00:06 /lib/systemd/systemd-logind
message+   461     1  0 oct28 ?        00:00:01 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
root       467     1  0 oct28 ?        00:00:59 /usr/sbin/rsyslogd -n
root       469     1  0 oct28 ?        00:00:00 /usr/sbin/acpid
root       745     1  0 oct28 tty1     00:00:00 /sbin/agetty --noclear tty1 linux
root       851     2  0 dic04 ?        00:00:47 [kworker/1:1]
root      1765     2  0 07:05 ?        00:00:00 [kworker/u16:2]
root      4589     2  0 07:22 ?        00:00:00 [kworker/u16:1]
root      5636     2  0 oct31 ?        00:00:00 [xfsalloc]
root      5637     2  0 oct31 ?        00:00:00 [xfs_mru_cache]
root      5638     2  0 oct31 ?        00:00:00 [xfslogd]
root      5641     2  0 oct31 ?        00:00:00 [jfsIO]
root      5642     2  0 oct31 ?        00:00:00 [jfsCommit]
root      5643     2  0 oct31 ?        00:00:00 [jfsCommit]
root      5644     2  0 oct31 ?        00:00:00 [jfsCommit]
root      5645     2  0 oct31 ?        00:00:00 [jfsCommit]
root      5646     2  0 oct31 ?        00:00:00 [jfsSync]
root      5665     2  0 oct31 ?        00:00:00 [bioset]
postfix   5859  8842  0 07:30 ?        00:00:00 cleanup -z -t unix -u -c
postfix   5877  8842  0 07:30 ?        00:00:00 trivial-rewrite -n rewrite -t unix -u -c
postfix   5930  8842  0 07:30 ?        00:00:00 local -t unix
postfix   5958  8842  0 07:30 ?        00:00:00 local -t unix
postfix   6010  8842  0 07:30 ?        00:00:00 local -t unix
postfix   6027  8842  0 07:30 ?        00:00:00 pickup -l -t unix -u -c
root      6098   457  0 07:30 ?        00:00:00 sshd: fernando [priv]
fernando  6122  6098  0 07:30 ?        00:00:00 sshd: fernando@pts/0
fernando  6123  6122  0 07:30 pts/0    00:00:00 -bash
root      6134  6123  0 07:30 pts/0    00:00:00 sudo bash
root      6135  6134  0 07:30 pts/0    00:00:00 bash
nagios    6152  6310  0 07:30 ?        00:00:00 /usr/lib/nagios/plugins/check_ping -H 172.23.40.41 -w 200.0,20% -c 600.0,60% -p 5
nagios    6153  6305  0 07:30 ?        00:00:00 /usr/lib/nagios/plugins/check_ping -H 172.23.40.46 -w 200.0,20% -c 600.0,60% -p 5
nagios    6154  6309  0 07:30 ?        00:00:00 /usr/lib/nagios/plugins/check_ping -H 172.23.40.51 -w 200.0,20% -c 600.0,60% -p 5
nagios    6155  6153  0 07:30 ?        00:00:00 /bin/ping -n -U -w 10 -c 5 172.23.40.46
nagios    6156  6154  0 07:30 ?        00:00:00 /bin/ping -n -U -w 10 -c 5 172.23.40.51
nagios    6157  6152  0 07:30 ?        00:00:00 /bin/ping -n -U -w 10 -c 5 172.23.40.41
nagios    6158  6306  0 07:30 ?        00:00:00 /usr/lib/nagios/plugins/check_ping -H 172.23.40.73 -w 3000.0,80% -c 5000.0,100% -p 5
nagios    6159  6158  0 07:30 ?        00:00:00 /bin/ping -n -U -w 30 -c 5 172.23.40.73
root      6160  6135  0 07:30 pts/0    00:00:00 ps -ef --cols=300
nagios    6303     1  0 dic02 ?        00:02:06 /usr/local/nagios/bin/nagios -d /etc/nagios/nagios.cfg
nagios    6304  6303  0 dic02 ?        00:00:03 /usr/local/nagios/bin/nagios --worker /usr/local/nagios/var/rw/nagios.qh
nagios    6305  6303  0 dic02 ?        00:00:03 /usr/local/nagios/bin/nagios --worker /usr/local/nagios/var/rw/nagios.qh
nagios    6306  6303  0 dic02 ?        00:00:03 /usr/local/nagios/bin/nagios --worker /usr/local/nagios/var/rw/nagios.qh
nagios    6307  6303  0 dic02 ?        00:00:03 /usr/local/nagios/bin/nagios --worker /usr/local/nagios/var/rw/nagios.qh
nagios    6309  6303  0 dic02 ?        00:00:03 /usr/local/nagios/bin/nagios --worker /usr/local/nagios/var/rw/nagios.qh
nagios    6310  6303  0 dic02 ?        00:00:03 /usr/local/nagios/bin/nagios --worker /usr/local/nagios/var/rw/nagios.qh
nagios    6327  6303  0 dic02 ?        00:00:04 /usr/local/nagios/bin/nagios -d /etc/nagios/nagios.cfg
nagios    6404     1  0 dic02 ?        00:00:00 /usr/local/nagios/bin/ndo2db -c /usr/local/nagios/etc/ndo2db.cfg -f
root      6405     2  0 dic02 ?        00:00:00 [kworker/3:1]
root      7004     1  0 nov24 ?        00:00:00 /bin/sh /usr/bin/mysqld_safe
mysql     7352  7004  0 nov24 ?        00:05:39 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib/mysql/plugin --user=mysql --log-error=/var/log/mysql/error.log --pid-file=/var/run/mysqld/mysqld.pid --socket=/var/run/mysqld/mysqld.sock --port=3306
root      7380     2  0 dic03 ?        00:01:44 [kworker/0:0]
root      8694     1  0 nov15 ?        00:00:00 /usr/sbin/xinetd -pidfile /run/xinetd.pid -stayalive -inetd_compat -inetd_ipv6
root      8842     1  0 nov15 ?        00:00:24 /usr/lib/postfix/master
root     13053     2  0 02:01 ?        00:00:08 [kworker/2:1]
nagios   15532     1  0 nov01 ?        00:02:55 /usr/local/pnp4nagios/bin/npcd -d -f /etc/pnp4nagios/npcd.cfg
postfix  17542  8842  0 nov15 ?        00:00:40 qmgr -l -t unix -u
root     19129     2  0 dic02 ?        00:01:27 [kworker/1:2]
nagios   19850     1  0 nov02 ?        00:06:59 /usr/bin/python /usr/bin/mkeventd -C /etc/check_mk --statedir /var/lib/mkeventd --logdir /var/lib/mkeventd -P /var/log/nagios/rw/mkeventd/events -E /var/log/nagios/rw/mkeventd/eventsocket -S /var/log/nagios/rw/mkeventd/status --pidfile /var/log/nagios/
snmp     21202     1  0 nov03 ?        00:13:19 /usr/sbin/snmpd -Lsd -Lf /dev/null -u snmp -g snmp -I -smux mteTrigger mteTriggerConf -p /run/snmpd.pid
root     27005     2  0 06:25 ?        00:00:01 [kworker/3:0]
root     27018     2  0 06:25 ?        00:00:03 [kworker/0:2]
www-data 27020 28920  0 06:25 ?        00:00:00 /usr/sbin/apache2 -k start
www-data 27021 28920  0 06:25 ?        00:00:00 /usr/sbin/apache2 -k start
www-data 27022 28920  0 06:25 ?        00:00:00 /usr/sbin/apache2 -k start
www-data 27024 28920  0 06:25 ?        00:00:00 /usr/sbin/apache2 -k start
www-data 27025 28920  0 06:25 ?        00:00:00 /usr/sbin/apache2 -k start
root     28920     1  0 nov29 ?        00:00:08 /usr/sbin/apache2 -k start
root     30119     2  0 dic04 ?        00:00:01 [kworker/2:2]

Code: Select all

+----------------------------------------+
| Tables_in_nagios                       |
+----------------------------------------+
| nagios_acknowledgements                |
| nagios_commands                        |
| nagios_commenthistory                  |
| nagios_comments                        |
| nagios_configfiles                     |
| nagios_configfilevariables             |
| nagios_conninfo                        |
| nagios_contact_addresses               |
| nagios_contact_notificationcommands    |
| nagios_contactgroup_members            |
| nagios_contactgroups                   |
| nagios_contactnotificationmethods      |
| nagios_contactnotifications            |
| nagios_contacts                        |
| nagios_contactstatus                   |
| nagios_customvariables                 |
| nagios_customvariablestatus            |
| nagios_dbversion                       |
| nagios_downtimehistory                 |
| nagios_eventhandlers                   |
| nagios_externalcommands                |
| nagios_flappinghistory                 |
| nagios_host_contactgroups              |
| nagios_host_contacts                   |
| nagios_host_parenthosts                |
| nagios_hostchecks                      |
| nagios_hostdependencies                |
| nagios_hostescalation_contactgroups    |
| nagios_hostescalation_contacts         |
| nagios_hostescalations                 |
| nagios_hostgroup_members               |
| nagios_hostgroups                      |
| nagios_hosts                           |
| nagios_hoststatus                      |
| nagios_instances                       |
| nagios_logentries                      |
| nagios_notifications                   |
| nagios_objects                         |
| nagios_processevents                   |
| nagios_programstatus                   |
| nagios_runtimevariables                |
| nagios_scheduleddowntime               |
| nagios_service_contactgroups           |
| nagios_service_contacts                |
| nagios_service_parentservices          |
| nagios_servicechecks                   |
| nagios_servicedependencies             |
| nagios_serviceescalation_contactgroups |
| nagios_serviceescalation_contacts      |
| nagios_serviceescalations              |
| nagios_servicegroup_members            |
| nagios_servicegroups                   |
| nagios_services                        |
| nagios_servicestatus                   |
| nagios_statehistory                    |
| nagios_systemcommands                  |
| nagios_timedeventqueue                 |
| nagios_timedevents                     |
| nagios_timeperiod_timeranges           |
| nagios_timeperiods                     |
+----------------------------------------+

Code: Select all

/lib/systemd/system/ndo2db.service

Code: Select all

/usr/local/nagios/bin/ndo2db

Code: Select all

grep -i broker /etc/nagios/nagios.cfg