Page 1 of 2
h3c switch monitoring by SNMP
Posted: Tue Dec 20, 2016 10:00 pm
by huytq1786
Dear All
I just installed Nagios Core, and now i would like to monitoring H3C switch by SNMP, But i got error:
(No output on stdout) stderr: execvp(/usr/local/nagios/libexec/check_snmp, ...) failed. errno is 2: No such file or directory
this is my switch.cfg file:
check_command check_snmp! -C 123456 -o sysUptime.0
i already configed on H3C switch as: snmp-agent community write 123456
Re: h3c switch monitoring by SNMP
Posted: Wed Dec 21, 2016 12:14 pm
by mcapra
Can you share the full output of the following command executed from the CLI of your Nagios Core machine:
Re: h3c switch monitoring by SNMP
Posted: Wed Dec 21, 2016 8:30 pm
by huytq1786
Thank you
Code: Select all
[root@localhost ~]# ls -al /usr/local/nagios/libexec
total 6728
drwxrwxr-x. 3 nagios nagios 4096 Dec 20 00:37 .
drwxr-xr-x. 9 root root 94 Dec 20 00:37 ..
-rwxr-xr-x. 1 nagios nagios 208624 Dec 20 00:37 check_apt
-rwxr-xr-x. 1 nagios nagios 2346 Dec 20 00:37 check_breeze
-rwxr-xr-x. 1 nagios nagios 212736 Dec 20 00:37 check_by_ssh
lrwxrwxrwx. 1 root root 9 Dec 20 00:37 check_clamd -> check_tcp
-rwxr-xr-x. 1 nagios nagios 161120 Dec 20 00:37 check_cluster
-r-sr-xr-x. 1 root nagios 210416 Dec 20 00:37 check_dhcp
-rwxr-xr-x. 1 nagios nagios 221072 Dec 20 00:37 check_dig
-rwxr-xr-x. 1 nagios nagios 225440 Dec 20 00:37 check_disk
-rwxr-xr-x. 1 nagios nagios 9385 Dec 20 00:37 check_disk_smb
-rwxr-xr-x. 1 nagios nagios 228400 Dec 20 00:37 check_dns
-rwxr-xr-x. 1 nagios nagios 125104 Dec 20 00:37 check_dummy
-rwxr-xr-x. 1 nagios nagios 3604 Dec 20 00:37 check_file_age
-rwxr-xr-x. 1 nagios nagios 6412 Dec 20 00:37 check_flexlm
lrwxrwxrwx. 1 root root 9 Dec 20 00:37 check_ftp -> check_tcp
-rwxr-xr-x. 1 nagios nagios 306832 Dec 20 00:37 check_http
-r-sr-xr-x. 1 root nagios 225144 Dec 20 00:37 check_icmp
-rwxr-xr-x. 1 nagios nagios 168000 Dec 20 00:37 check_ide_smart
-rwxr-xr-x. 1 nagios nagios 15275 Dec 20 00:37 check_ifoperstatus
-rwxr-xr-x. 1 nagios nagios 13423 Dec 20 00:37 check_ifstatus
lrwxrwxrwx. 1 root root 9 Dec 20 00:37 check_imap -> check_tcp
-rwxr-xr-x. 1 nagios nagios 6984 Dec 20 00:37 check_ircd
-rwxr-xr-x. 1 nagios nagios 185752 Dec 20 00:37 check_load
-rwxr-xr-x. 1 nagios nagios 6595 Dec 20 00:37 check_log
-rwxr-xr-x. 1 nagios nagios 22756 Dec 20 00:37 check_mailq
-rwxr-xr-x. 1 nagios nagios 167184 Dec 20 00:37 check_mrtg
-rwxr-xr-x. 1 nagios nagios 168544 Dec 20 00:37 check_mrtgtraf
-rwxr-xr-x. 1 nagios nagios 184984 Dec 20 00:37 check_nagios
lrwxrwxrwx. 1 root root 9 Dec 20 00:37 check_nntp -> check_tcp
-rwxr-xr-x. 1 nagios nagios 218128 Dec 20 00:37 check_nt
-rwxr-xr-x. 1 nagios nagios 216944 Dec 20 00:37 check_ntp
-rwxr-xr-x. 1 nagios nagios 206448 Dec 20 00:37 check_ntp_peer
-rwxr-xr-x. 1 nagios nagios 201616 Dec 20 00:37 check_ntp_time
-rwxr-xr-x. 1 nagios nagios 248576 Dec 20 00:37 check_nwstat
-rwxr-xr-x. 1 nagios nagios 8926 Dec 20 00:37 check_oracle
-rwxr-xr-x. 1 nagios nagios 191320 Dec 20 00:37 check_overcr
-rwxr-xr-x. 1 nagios nagios 221512 Dec 20 00:37 check_ping
lrwxrwxrwx. 1 root root 9 Dec 20 00:37 check_pop -> check_tcp
-rwxr-xr-x. 1 nagios nagios 218160 Dec 20 00:37 check_procs
-rwxr-xr-x. 1 nagios nagios 183936 Dec 20 00:37 check_real
-rwxr-xr-x. 1 nagios nagios 9679 Dec 20 00:37 check_rpc
-rwxr-xr-x. 1 nagios nagios 1465 Dec 20 00:37 check_sensors
-rwxr-xr-x. 1 nagios nagios 214792 Dec 20 00:37 check_smtp
-rwxr-xr-x. 1 nagios nagios 183432 Dec 20 00:37 check_ssh
-rwxr-xr-x. 1 nagios nagios 164760 Dec 20 00:37 check_swap
-rwxr-xr-x. 1 nagios nagios 200088 Dec 20 00:37 check_tcp
-rwxr-xr-x. 1 nagios nagios 185232 Dec 20 00:37 check_time
lrwxrwxrwx. 1 root root 9 Dec 20 00:37 check_udp -> check_tcp
-rwxr-xr-x. 1 nagios nagios 197744 Dec 20 00:37 check_ups
-rwxr-xr-x. 1 nagios nagios 161560 Dec 20 00:37 check_uptime
-rwxr-xr-x. 1 nagios nagios 156168 Dec 20 00:37 check_users
-rwxr-xr-x. 1 nagios nagios 3032 Dec 20 00:37 check_wave
drwxr-xr-x. 4 root root 221 Dec 20 00:28 eventhandlers
-rwxr-xr-x. 1 nagios nagios 151624 Dec 20 00:37 negate
-rwxr-xr-x. 1 nagios nagios 149296 Dec 20 00:37 urlize
-rwxr-xr-x. 1 nagios nagios 1949 Dec 20 00:37 utils.pm
-rwxr-xr-x. 1 nagios nagios 2791 Dec 20 00:37 utils.sh
Re: h3c switch monitoring by SNMP
Posted: Thu Dec 22, 2016 2:07 pm
by rkennedy
It looks like you're missing the check_snmp plugin, which is included with the most recent version of nagios-plugins. I would download the most recent one here, and then re-compile them.
https://www.nagios.org/downloads/nagios-plugins/
I verified on my end, and here are the plugins you should see (after compiling 2.1.4) -
Code: Select all
[root@bob libexec]# ls
check_apt check_flexlm check_ircd check_nntps check_pop check_ssh check_wave
check_breeze check_ftp check_jabber check_nt check_procs check_ssmtp negate
check_clamd check_hpjd check_load check_ntp check_real check_swap old
check_cluster check_http check_log check_ntp_peer check_rpc check_tcp urlize
check_dhcp check_icmp check_mailq check_ntp_time check_sensors check_time utils.pm
check_disk check_ide_smart check_mrtg check_nwstat check_simap check_udp utils.sh
check_disk_smb check_ifoperstatus check_mrtgtraf check_oracle check_smtp check_ups
check_dummy check_ifstatus check_nagios check_overcr check_snmp check_uptime
check_file_age check_imap check_nntp check_ping check_spop check_users
Re: h3c switch monitoring by SNMP
Posted: Sat Dec 24, 2016 12:04 pm
by huytq1786
here is my result:
check_apt check_dhcp check_dummy check_icmp check_ircd check_mrtgtraf check_ntp_peer check_ping check_sensors check_time check_wave utils.sh
check_breeze check_dig check_file_age check_ide_smart check_load check_nagios check_ntp_time check_pop check_smtp check_udp eventhandlers
check_by_ssh check_disk check_flexlm check_ifoperstatus check_log check_nntp check_nwstat check_procs check_ssh check_ups negate
check_clamd check_disk_smb check_ftp check_ifstatus check_mailq check_nt check_oracle check_real check_swap check_uptime urlize
check_cluster check_dns check_http check_imap check_mrtg check_ntp check_overcr check_rpc check_tcp check_users utils.pm
Re: h3c switch monitoring by SNMP
Posted: Tue Dec 27, 2016 8:25 am
by rhassing
It could be you're missing some dependencies and then the check_snmp file will not be compiled.
Please check:
Code: Select all
ls -al /usr/local/nagios/libexec/check_snmp*
To verify if snmp is configured correctly, please try:
Code: Select all
snmpwalk -v2c -c 123456 h3cswitch_ip_address sysUptime.0
Re: h3c switch monitoring by SNMP
Posted: Tue Dec 27, 2016 1:13 pm
by rkennedy
Thanks @rhassing!
@huytq1786 - if you recompiled once again with the latest version then what @rhassing mentioned is correct, you may be missing pre-reqs.
Re: h3c switch monitoring by SNMP
Posted: Wed Dec 28, 2016 5:40 am
by huytq1786
rhassing wrote:It could be you're missing some dependencies and then the check_snmp file will not be compiled.
Please check:
Code: Select all
ls -al /usr/local/nagios/libexec/check_snmp*
To verify if snmp is configured correctly, please try:
Code: Select all
snmpwalk -v2c -c 123456 h3cswitch_ip_address sysUptime.0
Thank you
[root@localhost ~]# cd /usr/local/nagios/libexec
[root@localhost libexec]# ls
check_apt check_http check_nt check_ssh
check_breeze check_icmp check_ntp check_swap
check_by_ssh check_ide_smart check_ntp_peer check_tcp
check_clamd check_ifoperstatus check_ntp_time check_time
check_cluster check_ifstatus check_nwstat check_udp
check_dhcp check_imap check_oracle check_ups
check_dig check_ircd check_overcr check_uptime
check_disk check_load check_ping check_users
check_disk_smb check_log check_pop check_wave
check_dns check_mailq check_procs eventhandlers
check_dummy check_mrtg check_real negate
check_file_age check_mrtgtraf check_rpc urlize
check_flexlm check_nagios check_sensors utils.pm
check_ftp check_nntp check_smtp utils.sh
i did not see check_snmp. i already installed the latest of plugin.
Re: h3c switch monitoring by SNMP
Posted: Wed Dec 28, 2016 10:59 am
by rkennedy
Please post the output from the configure for the section, something like this -
Code: Select all
config.status: creating po/Makefile
--with-apt-get-command:
--with-ping6-command: /bin/ping6 -n -U -w %d -c %d %s
--with-ping-command: /bin/ping -n -U -w %d -c %d %s
--with-ipv6: yes
--with-mysql: no
--with-openssl: yes
--with-gnutls: no
--enable-extra-opts: yes
--with-perl: /usr/bin/perl
--enable-perl-modules: no
--with-cgiurl: /nagios/cgi-bin
--with-trusted-path: /usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
--enable-libtap: no
Also, what is the output of
rpm -qa | grep 'net-snmp'?
Re: h3c switch monitoring by SNMP
Posted: Wed Dec 28, 2016 9:02 pm
by huytq1786
rkennedy wrote:Please post the output from the configure for the section, something like this -
Code: Select all
config.status: creating po/Makefile
--with-apt-get-command:
--with-ping6-command: /bin/ping6 -n -U -w %d -c %d %s
--with-ping-command: /bin/ping -n -U -w %d -c %d %s
--with-ipv6: yes
--with-mysql: no
--with-openssl: yes
--with-gnutls: no
--enable-extra-opts: yes
--with-perl: /usr/bin/perl
--enable-perl-modules: no
--with-cgiurl: /nagios/cgi-bin
--with-trusted-path: /usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
--enable-libtap: no
Also, what is the output of
rpm -qa | grep 'net-snmp'?
Sorry , but i do not know what the command i can get output like you show