Page 1 of 1
Problems with XI not seeing HTTP hosts (down)
Posted: Thu Jan 12, 2017 8:39 am
by dlukinski
Hello XI Support
We've suddenly developed problems with otherwise healthy monitoring of some HTTP hosts (picture attached)
Most of these are HTTP-availability configured, but down as far as Nagios XI concerned. (CRITICAL - Socket timeout after 10 seconds)
all the hosts listed are actually online and accessible
How to resolve this problem?
Re: Problems with XI not seeing HTTP hosts (down)
Posted: Thu Jan 12, 2017 10:52 am
by rkennedy
I ran a test on my end against one of the hosts listed, and even here it took 5 seconds to finish -
Code: Select all
[root@centos7x64 libexec]# ./check_http -H outlook.office.com
HTTP OK: HTTP/1.1 301 Moved Permanently - 481 bytes in 5.161 second response time |time=5.160872s;;;0.000000 size=481B;;;0
Depending on the load / network of your machine, I could see it taking longer than 10 seconds to finish up with what I mentioned above. Can you try appending -t 30 to the end of them?
If that doesn't work, could you post the full output with a -v? Here's it ran on my end -
Code: Select all
[root@centos7x64 libexec]# ./check_http -H outlook.office.com -t 30 -v
GET / HTTP/1.1
User-Agent: check_http/v2.0.3 (nagios-plugins 2.0.3)
Connection: close
Host: outlook.office.com
Accept: */*
http://outlook.office.com:80/ is 481 characters
STATUS: HTTP/1.1 301 Moved Permanently
**** HEADER ****
Cache-Control: no-cache
Pragma: no-cache
Content-Length: 0
Location: https://outlook.office.com/owa/
Server: Microsoft-IIS/8.5
X-FEServer: DM5PR18CA0016
X-RequestId: 5047a022-a236-48ec-8d90-a5bfd208bf49
X-Powered-By: ASP.NET
X-FEServer: DM5PR18CA0016
X-MSEdge-Ref: Ref A: 4CC104DE747547A69B27A81AA9B61D39 Ref B: 351D0AAA01CD0B7BE150F83AE0A9C278 Ref C: Thu Jan 12 07:51:03 2017 PST
Date: Thu, 12 Jan 2017 15:51:03 GMT
Connection: close
**** CONTENT ****
HTTP OK: HTTP/1.1 301 Moved Permanently - 481 bytes in 5.146 second response time |time=5.146166s;;;0.000000 size=481B;;;0
Re: Problems with XI not seeing HTTP hosts (down)
Posted: Wed Jan 18, 2017 12:55 pm
by dlukinski
rkennedy wrote:I ran a test on my end against one of the hosts listed, and even here it took 5 seconds to finish -
Code: Select all
[root@centos7x64 libexec]# ./check_http -H outlook.office.com
HTTP OK: HTTP/1.1 301 Moved Permanently - 481 bytes in 5.161 second response time |time=5.160872s;;;0.000000 size=481B;;;0
Depending on the load / network of your machine, I could see it taking longer than 10 seconds to finish up with what I mentioned above. Can you try appending -t 30 to the end of them?
If that doesn't work, could you post the full output with a -v? Here's it ran on my end -
Code: Select all
[root@centos7x64 libexec]# ./check_http -H outlook.office.com -t 30 -v
GET / HTTP/1.1
User-Agent: check_http/v2.0.3 (nagios-plugins 2.0.3)
Connection: close
Host: outlook.office.com
Accept: */*
http://outlook.office.com:80/ is 481 characters
STATUS: HTTP/1.1 301 Moved Permanently
**** HEADER ****
Cache-Control: no-cache
Pragma: no-cache
Content-Length: 0
Location: https://outlook.office.com/owa/
Server: Microsoft-IIS/8.5
X-FEServer: DM5PR18CA0016
X-RequestId: 5047a022-a236-48ec-8d90-a5bfd208bf49
X-Powered-By: ASP.NET
X-FEServer: DM5PR18CA0016
X-MSEdge-Ref: Ref A: 4CC104DE747547A69B27A81AA9B61D39 Ref B: 351D0AAA01CD0B7BE150F83AE0A9C278 Ref C: Thu Jan 12 07:51:03 2017 PST
Date: Thu, 12 Jan 2017 15:51:03 GMT
Connection: close
**** CONTENT ****
HTTP OK: HTTP/1.1 301 Moved Permanently - 481 bytes in 5.146 second response time |time=5.146166s;;;0.000000 size=481B;;;0
Please close. I googled lots that day, but it was not the case: slow VMWARE Nagios XI VM migration/move cause this behaviour (we run Nagios on 3rd party VMWARE cluster).
Re: Problems with XI not seeing HTTP hosts (down)
Posted: Wed Jan 18, 2017 4:40 pm
by rkennedy
Ah! Glad to hear you were able to find a logical answer for it.
/closed