Brand new Nagios install and SNMP Walk error
Posted: Thu Apr 13, 2017 10:15 am
Getting an error when trying to monitor a server via SNMP:
Unix admin ran this from target server:
Last time this happened we updated our SNMP Walk Wizard I believe and it fixed it. But that was on an older server, this server is brand new and everything says it's up to date. Using the Linux SNMP wizard.
Thoughts?
Linux SNMP wizard is:
1.5.2
SNMP Walk wizard is:
1.3.5
Nagios XI Version : 5.4.3
Code: Select all
[************** ~]$ snmpwalk -v 3 -u ******** -a SHA -A ************* -x AES -X *********** -l AuthPriv ************* SNMPv2-MIB::sysDescr.0 = STRING: Linux ******************3.10.0-514.10.2.el7.x86_64 #1 SMP Thu Mar 2 11:35:29 PST 2017 x86_64
SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (17461618) 2 days, 0:30:16.18
SNMPv2-MIB::sysContact.0 = STRING: Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
SNMPv2-MIB::sysName.0 = STRING: ***************
SNMPv2-MIB::sysLocation.0 = STRING: Unknown (edit /etc/snmp/snmpd.conf)
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (49) 0:00:00.49
SNMPv2-MIB::sysORID.1 = OID: SNMP-MPD-MIB::snmpMPDCompliance
SNMPv2-MIB::sysORID.2 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance
SNMPv2-MIB::sysORID.3 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance
SNMPv2-MIB::sysORID.4 = OID: SNMPv2-MIB::snmpMIB
SNMPv2-MIB::sysORID.5 = OID: TCP-MIB::tcpMIB
SNMPv2-MIB::sysORID.6 = OID: IP-MIB::ip
SNMPv2-MIB::sysORID.7 = OID: UDP-MIB::udpMIB
SNMPv2-MIB::sysORID.8 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup
SNMPv2-MIB::sysORID.9 = OID: SNMP-NOTIFICATION-MIB::snmpNotifyFullCompliance
SNMPv2-MIB::sysORID.10 = OID: NOTIFICATION-LOG-MIB::notificationLogMIB
SNMPv2-MIB::sysORDescr.1 = STRING: The MIB for Message Processing and Dispatching.
SNMPv2-MIB::sysORDescr.2 = STRING: The management information definitions for the SNMP User-based Security Model.
SNMPv2-MIB::sysORDescr.3 = STRING: The SNMP Management Architecture MIB.
SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for SNMPv2 entities
SNMPv2-MIB::sysORDescr.5 = STRING: The MIB module for managing TCP implementations
SNMPv2-MIB::sysORDescr.6 = STRING: The MIB module for managing IP and ICMP implementations
SNMPv2-MIB::sysORDescr.7 = STRING: The MIB module for managing UDP implementations
SNMPv2-MIB::sysORDescr.8 = STRING: View-based Access Control Model for SNMP.
SNMPv2-MIB::sysORDescr.9 = STRING: The MIB modules for managing SNMP Notification, plus filtering.
SNMPv2-MIB::sysORDescr.10 = STRING: The MIB module for logging SNMP Notifications.
SNMPv2-MIB::sysORUpTime.1 = Timeticks: (47) 0:00:00.47
SNMPv2-MIB::sysORUpTime.2 = Timeticks: (47) 0:00:00.47
SNMPv2-MIB::sysORUpTime.3 = Timeticks: (47) 0:00:00.47
SNMPv2-MIB::sysORUpTime.4 = Timeticks: (47) 0:00:00.47
SNMPv2-MIB::sysORUpTime.5 = Timeticks: (48) 0:00:00.48
SNMPv2-MIB::sysORUpTime.6 = Timeticks: (48) 0:00:00.48
SNMPv2-MIB::sysORUpTime.7 = Timeticks: (48) 0:00:00.48
SNMPv2-MIB::sysORUpTime.8 = Timeticks: (48) 0:00:00.48
SNMPv2-MIB::sysORUpTime.9 = Timeticks: (49) 0:00:00.49
SNMPv2-MIB::sysORUpTime.10 = Timeticks: (49) 0:00:00.49
HOST-RESOURCES-MIB::hrSystemUptime.0 = Timeticks: (17462938) 2 days, 0:30:29.38
HOST-RESOURCES-MIB::hrSystemUptime.0 = No more variables left in this MIB View (It is past the end of the MIB tree) Thoughts?
Linux SNMP wizard is:
1.5.2
SNMP Walk wizard is:
1.3.5
Nagios XI Version : 5.4.3