Force Check not working for host
Force Check not working for host
We have a host where "Force an immediate check" is not working. The host is up and pingable and no errors are thrown for the force check. Service checks are working fine, however, when attempting to force an immediate check on the host the "Last Check:" date/timestamp does not get updated and new values are not displayed for rta, lost, etc. Issue is only with this particular host. Any ideas on what else I can check?
Thanks
Thanks
-
- Posts: 1597
- Joined: Tue Sep 27, 2016 4:57 pm
Re: Force Check not working for host
Please provide the host name in question and the file /usr/local/nagios/var/status.dat
Previous Nagios employee
Re: Force Check not working for host
Sent you a PM.
Thanks
Thanks
-
- Posts: 1597
- Joined: Tue Sep 27, 2016 4:57 pm
Re: Force Check not working for host
That seems to be pretty normal. Can you attempt a Force Check again, then generate a fresh profile and PM that to me as well?
XI > Admin > System Profile > Download Profile
Please include the zip file in your response.
XI > Admin > System Profile > Download Profile
Please include the zip file in your response.
Previous Nagios employee
-
- Posts: 1597
- Joined: Tue Sep 27, 2016 4:57 pm
Re: Force Check not working for host
You should consider upgrading Nagios XI. You are missing important security and functionality updates.
Does it work if you use the Nagios Core interface? http://yourip/nagios/
What is the full output from the following?
Does it work if you use the Nagios Core interface? http://yourip/nagios/
What is the full output from the following?
Code: Select all
# /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
Previous Nagios employee
Re: Force Check not working for host
PM'd command output. The check does not work from core interface either.
-
- Posts: 1597
- Joined: Tue Sep 27, 2016 4:57 pm
Re: Force Check not working for host
Message is sitting in my outbox. ?!?
-
- Former Nagios Staff
- Posts: 4583
- Joined: Wed Sep 21, 2016 10:29 am
- Location: NoLo, Minneapolis, MN
- Contact:
Re: Force Check not working for host
You could just past the output in a code block and scrub sensitive info. Please put the output in a code block. The "Code" button is the fifth from the left on the post input screen (between Quote and List).
Are you able to upgrade? Here are instructions, unless you are using the offline: https://assets.nagios.com/downloads/nag ... nstall.pdf
Are you able to upgrade? Here are instructions, unless you are using the offline: https://assets.nagios.com/downloads/nag ... nstall.pdf
Re: Force Check not working for host
Code: Select all
Nagios Core 4.1.1
Copyright (c) 2009-present Nagios Core Development Team and Community Contributors
Copyright (c) 1999-2009 Ethan Galstad
Last Modified: 08-19-2015
License: GPL
Website: https://www.nagios.org
Reading configuration data...
Read main config file okay...
Read object config files okay...
Running pre-flight check on configuration data...
Checking objects...
Checked 2041 services.
Checked 116 hosts.
Checked 12 host groups.
Checked 5 service groups.
Checked 26 contacts.
Checked 2 contact groups.
Checked 138 commands.
Checked 23 time periods.
Checked 0 host escalations.
Checked 0 service escalations.
Checking for circular paths...
Checked 116 hosts
Checked 0 service dependencies
Checked 0 host dependencies
Checked 23 timeperiods
Checking global event handlers...
Checking obsessive compulsive processor commands...
Checking misc settings...
Total Warnings: 0
Total Errors: 0
Things look okay - No serious problems were detected during the pre-flight check