Page 1 of 1
/var/lib/mrtg/10.x..x.x_3.rrd does not exist.
Posted: Thu Jul 13, 2017 8:14 am
by inas.labib
Hi ,
we added our asa firewall to monitor ports and bandwidth. after adding it shows below error. please advice to fix.
Nagios XI 5.2.2
added using:
Configure -> core config manager --> Network Switch / Router --> snmp v3
Port 3 Bandwidth:
/var/lib/mrtg/10.x.x.x_3.rrd does not exist.
Port 13 Bandwidth:
/var/lib/mrtg/10.x.x.x_13.rrd does not exist.
Re: /var/lib/mrtg/10.x..x.x_3.rrd does not exist.
Posted: Thu Jul 13, 2017 11:14 am
by ssax
Please see this KB article to determine the issue:
https://support.nagios.com/kb/article/n ... raphs.html
Also, please PM your
/etc/mrtg/conf.d/X.X.X.X.cfg file for this device.
Thank you
Edit - Received and placed in shared support directory
Re: /var/lib/mrtg/10.x..x.x_3.rrd does not exist.
Posted: Fri Jul 14, 2017 8:37 am
by inas.labib
Hi,
Sent the config file as requested. Due to security reasons masked the ip, name and password details. kindly review and update
Re: /var/lib/mrtg/10.x..x.x_3.rrd does not exist.
Posted: Fri Jul 14, 2017 9:37 am
by ssax
That looks fine, please run through the KB article and see what MRTG outputs when you run it, that should give us an indications of what is occurring.
Thank you
Re: /var/lib/mrtg/10.x..x.x_3.rrd does not exist.
Posted: Sun Jul 16, 2017 2:42 am
by inas.labib
Thanks we will review the given link
Re: /var/lib/mrtg/10.x..x.x_3.rrd does not exist.
Posted: Mon Jul 17, 2017 11:46 am
by bolson
Great! Keep us posted.
Re: /var/lib/mrtg/10.x..x.x_3.rrd does not exist.
Posted: Mon Jul 31, 2017 2:35 am
by inas.labib
Hi ,
The given link is really useful and we are able to see the bandwidth graphs in nagios.
is this using snmp poll in the background ?
kindly share basic functionality document/link
Re: /var/lib/mrtg/10.x..x.x_3.rrd does not exist.
Posted: Mon Jul 31, 2017 9:18 am
by bolson