Nagios Support Forum

Moderator Edit: This thread has been split from another - https://support.nagios.com/forum/viewto ... 15&t=29329

In the future, please create a new thread and link to the old one instead of adding on.

Would there be an update to this? I am experiencing the same issue.

Servers are fused and gather data, but no information will show when trying to add a dashlet.


Thanks

What version of Nagios Fusion do you have?

Could you take a screenshot of "no information showing when adding a dashlet"

I have used both versions 2014R1 and the newest release of nagiosfusion along with 2 OS releases 6/7 with the same experience. I am able to see data in the fusion interface

Just to be sure, are you able to view the performance graphs on Nagios XI?

I am able to see data in the fusion interface

When you say this, you can see everything but performance graphs correct?

Also, is it for all performance graphs? Or is it tied to a specific host/service?

I will test this out on the newest Fusion, and let you know my results.

The only issue I have is when adding the performance Graphs Dashlet in Nagios Fusion. On NagiosXI, When going to Home-> Performance Graphs, It works perfect.

Just to be sure, do you have any servers authenticated? Is XI using the fusekey?

Any there errors in your Fusion?

Mine works just fine on Fusion 4.0.1

We can't seem to get the fusekey login to work on XI. So I tried with basic login with core which does work but no data is avail in the dashlet settings. I'm thinking I am missing something. What instructions are you using for installation? I downloaded these instructions and I am not so sure they are correct. https://assets.nagios.com/downloads/nag ... ctions.pdf

I used the same instructions.

Along with these upgrade instructions for 4.0.1 (because I had 4.0.0 before)
https://assets.nagios.com/downloads/nag ... ctions.pdf

Could you show us what error you are getting when fusekey is not working? screenshots? What XI version?

Are you grabbing it from the correct place in XI? Admin --> System Settings --> Integration

I am getting the key from the location you mentioned and attached is the XI version and settings that should be correct but still fail, but strangely I am not seeing errors relating to the failure in the logs

BTW they are both clean installs.