Page 1 of 1
vmware 2011r1.9 configuration issues.
Posted: Fri Feb 03, 2012 10:45 am
by dkowalski
Hi all,
I'm having problems configuring nagiosxi, Ive RTFM at least as it pertains to installation and initial configuration, and scoured the support forms. The VM loads just fine I change the credentials as discussed in the documentation I adjust the timezone, and change the IP address. The next step would be to go to the web configuration, however; the xxx.xxx.xxx.xxx/nagiosxi/install.php spins and resets after I what I can only assume it times out.
I did manage to get past this point on a previous attempt. I had the same behavior while configuring email and system passwords. I am behind a proxy but the subnet the VM is using is allowed to bye pass that proxy.
Did I miss a step
Is there an undocumented trick?
Any help you can give me on this would be great.
Don
Re: vmware 2011r1.9 configuration issues.
Posted: Fri Feb 03, 2012 11:36 am
by scottwilkerson
dkowalski wrote:Hi all,
...
and change the IP address.
...
the xxx.xxx.xxx.xxx/nagiosxi/install.php spins and resets after I what I can only assume it times out.
...
Don
After changing the IP address did you restart the httpd service?
Also is the IP address it goes to at xxx.xxx.xxx.xxx/nagiosxi/install.php the old IP or the new one?
Re: vmware 2011r1.9 configuration issues.
Posted: Tue Feb 07, 2012 11:23 am
by dkowalski
Upgrading to 20 fixed the issues for now ... still have some problems where I have to click a button several times before an update or login or request takes. also the credintials or logged in user expires after about 30 seconds then must log in again to continue.
Re: vmware 2011r1.9 configuration issues.
Posted: Tue Feb 07, 2012 11:59 am
by scottwilkerson
What browser are you using?
Also, how much RAM have you allocated to the VM?
Re: vmware 2011r1.9 configuration issues.
Posted: Tue Feb 07, 2012 1:45 pm
by dkowalski
I am using IIE and firefox I get the same result from both browsers.
the vm has 2Gb of ram
Code: Select all
Nagios XI Installation Profile
System:
nagiosxi.lvm1.local 2.6.32-220.4.1.el6.i686 i686
CentOS release 6.2 (Final)
Gnome is not installed
Apache Information
PHP Version: 5.3.3
Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:10.0) Gecko/20100101 Firefox/10.0
Server Name: 10.1.0.25
Server Address: 10.1.0.25
Server Port: 80
Date/Time
PHP Timezone: America/Phoneix
PHP Time: Tue, 07 Feb 2012 11:38:13 -0700
System Time: Tue, 07 Feb 2012 11:38:13 -0700
Nagios XI Data
nagios (pid 19121) is running...
NPCD running (pid 1486).
ndo2db (pid 1552) is running...
CPU Load 15: 0.72
Total Hosts: 1
Total Services: 8
Function 'get_base_uri' returns: http://10.1.0.25/nagiosxi/
Function 'get_base_url' returns: http://10.1.0.25/nagiosxi/
Function 'get_backend_url(internal_call=false)' returns: http://10.1.0.25/nagiosxi/includes/components/profile/profile.php
Function 'get_backend_url(internal_call=true)' returns: http://localhost/nagiosxi/backend/
Ping Test localhost
Running:
/bin/ping -c 3 localhost 2>&1
PING localhost.localdomain (127.0.0.1) 56(84) bytes of data.
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.032 ms
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=2 ttl=64 time=0.042 ms
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=3 ttl=64 time=0.036 ms
--- localhost.localdomain ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1999ms
rtt min/avg/max/mdev = 0.032/0.036/0.042/0.008 ms
Test wget To locahost
WGET From URL: http://localhost/nagiosql/index.php
Running:
/usr/bin/wget http://localhost/nagiosql/index.php
--2012-02-07 11:38:15-- http://localhost/nagiosql/index.php
Resolving localhost... ::1, 127.0.0.1
Connecting to localhost|::1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 5259 (5.1K) [text/html]
Saving to: `/tmp/nagiosql_index.tmp'
0K ..... 100% 298M=0s
2012-02-07 11:38:15 (298 MB/s) - `/tmp/nagiosql_index.tmp' saved [5259/5259]
Code: Select all
httpd error log:
[Tue Feb 07 11:42:28 2012] [error] [client 10.1.0.1] PHP Warning: strftime(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Denver' for 'MST/-7.0/no DST' instead in /usr/local/nagiosxi/html/includes/utilsl.inc.php on line 380, referer: http://10.1.0.25/nagiosxi/admin/
Re: vmware 2011r1.9 configuration issues.
Posted: Tue Feb 07, 2012 2:12 pm
by dkowalski
They say reading is fundamental well so is spelling! had phoenix misspelled in the php ini file.