SNMP Walk unable to reach Cisco FTD Firewall
Posted: Fri Jun 29, 2018 3:56 pm
I'm in need of configuration assistance for doing an SNMP Walk on my firewall.
On the firewall, I have SNMP open and listening on port 161. The community string has been entered appropriately on both the serving firewall and Nagios XI.
I'm using SNMP Version 2c for Poll and Trap. This is set for Port 162. There is no username.
For SNMP Traps, I am toggling for Authentication, Link Up, Link Down, Cold Start, and Warm Start.
With all of this information out of the way, please let me know if you need more from me.
On the firewall, I have SNMP open and listening on port 161. The community string has been entered appropriately on both the serving firewall and Nagios XI.
I'm using SNMP Version 2c for Poll and Trap. This is set for Port 162. There is no username.
For SNMP Traps, I am toggling for Authentication, Link Up, Link Down, Cold Start, and Warm Start.
With all of this information out of the way, please let me know if you need more from me.