Nagios Support Forum

HI:
The following is check_esxi_hardware.py for HP and DELL machine test results, Why can't the machine for HP ,But DELL machines can?

HP:
20120220 17:08:43 Check classe OMC_PowerSupply
20120220 17:08:44 Check classe VMware_StorageExtent
20120220 17:08:44 Check classe VMware_Controller
20120220 17:08:44 Check classe VMware_StorageVolume
20120220 17:08:44 Check classe VMware_Battery
20120220 17:08:44 Check classe VMware_SASSATAPort
OK - Server: HP ProLiant BL460c G7 s/n: System BIOS: I27 2011-05-05
DELL :
20120220 17:07:28 Check classe OMC_PowerSupply
20120220 17:07:28 Element Name = Power Supply 1
20120220 17:07:28 Element Op Status = 2
20120220 17:07:28 Element Name = Power Supply 2
20120220 17:07:28 Element Op Status = 2
20120220 17:07:28 Check classe VMware_StorageExtent
20120220 17:07:28 Element Name = Drive 0 in enclosure 32 on controller 0 Fw: ES64 - ONLINE - HotSpares (3)
20120220 17:07:28 Element Op Status = 2
20120220 17:07:28 Element Name = Drive 1 in enclosure 32 on controller 0 Fw: ES64 - ONLINE - HotSpares (3)
20120220 17:07:28 Element Op Status = 2
20120220 17:07:28 Element Name = Drive 2 in enclosure 32 on controller 0 Fw: ES64 - ONLINE - HotSpares (3)
20120220 17:07:28 Element Op Status = 2
20120220 17:07:28 Element Name = Drive 3 in enclosure 32 on controller 0 Fw: ES64 - HOT SPARE
20120220 17:07:28 Element Op Status = 2
20120220 17:07:28 Check classe VMware_Controller
20120220 17:07:28 Element Name = Controller 0 (PERC H700 Integrated)
20120220 17:07:28 Element Op Status = 2
20120220 17:07:28 Check classe VMware_StorageVolume
20120220 17:07:28 Element Name = RAID 5 RAID5 Logical Volume 0 on controller 0, Drives(0e32,1e32,2e32) - OPTIMAL
20120220 17:07:28 Element Op Status = 2
20120220 17:07:28 Check classe VMware_Battery
20120220 17:07:28 Element Name = Battery on Controller 0
20120220 17:07:28 Element Op Status = 2
20120220 17:07:28 Check classe VMware_SASSATAPort
20120220 17:07:29 Element Name = Port 0 on Controller 0
20120220 17:07:29 Element Op Status = 2
20120220 17:07:29 Element Name = Port 1 on Controller 0
20120220 17:07:29 Element Op Status = 2
20120220 17:07:29 Element Name = Port 2 on Controller 0
20120220 17:07:29 Element Op Status = 2
20120220 17:07:29 Element Name = Port 3 on Controller 0
20120220 17:07:29 Element Op Status = 2
20120220 17:07:29 Element Name = Port 4 on Controller 0
20120220 17:07:29 Element Op Status = 15
20120220 17:07:29 Element Name = Port 5 on Controller 0
20120220 17:07:29 Element Op Status = 15
20120220 17:07:29 Element Name = Port 6 on Controller 0
20120220 17:07:29 Element Op Status = 15
20120220 17:07:29 Element Name = Port 7 on Controller 0
20120220 17:07:29 Element Op Status = 15
OK - Server: Dell Inc. PowerEdge R710 s/n: System BIOS: 2.2.10 2010-11-09


Thanks!