Nagios Support Forum

Code: Select all

No lock file found in /usr/local/nagios/var/nagios.lock

Code: Select all

lock_file=/var/run/nagios/nagios.pid

Code: Select all

lock_file=/usr/local/nagios/var/nagios.lock

Code: Select all

No lock file found in /usr/local/nagios/var/nagios.lock

Code: Select all

ls -l /var/run/nagios/nagios.pid

Code: Select all

#!/bin/sh
#
# chkconfig: 345 99 01
# description: Nagios network monitor
# processname: nagios
# File : nagios
#
# Author : Jorge Sanchez Aymar ([email protected])
#
# Changelog :
#
# 1999-07-09 Karl DeBisschop <[email protected]>
#  - setup for autoconf
#  - add reload function
# 1999-08-06 Ethan Galstad <[email protected]>
#  - Added configuration info for use with RedHat's chkconfig tool
#    per Fran Boon's suggestion
# 1999-08-13 Jim Popovitch <[email protected]>
#  - added variable for nagios/var directory
#  - cd into nagios/var directory before creating tmp files on startup
# 1999-08-16 Ethan Galstad <[email protected]>
#  - Added test for rc.d directory as suggested by Karl DeBisschop
# 2000-07-23 Karl DeBisschop <[email protected]>
#  - Clean out redhat macros and other dependencies
# 2003-01-11 Ethan Galstad <[email protected]>
#  - Updated su syntax (Gary Miller)
#
# Description: Starts and stops the Nagios monitor
#              used to provide network services status.
#
### BEGIN INIT INFO
# Provides:		nagios
# Required-Start:	$local_fs $syslog $network
# Required-Stop:	$local_fs $syslog $network
# Short-Description:	Starts and stops the Nagios monitoring server
# Description:		Starts and stops the Nagios monitoring server
### END INIT INFO

# Our install-time configuration.
prefix=/usr/local/nagios
exec_prefix=${prefix}
NagiosBin=${exec_prefix}/bin/nagios
NagiosCfgFile=${prefix}/etc/nagios.cfg
NagiosCfgtestFile=${prefix}/var/nagios.configtest
NagiosStatusFile=${prefix}/var/status.dat
NagiosRetentionFile=${prefix}/var/retention.dat
NagiosCommandFile=${prefix}/var/rw/nagios.cmd
NagiosVarDir=${prefix}/var
NagiosRunFile=${prefix}/var/nagios.lock
NagiosLockDir=/var/lock/subsys
NagiosLockFile=nagios
NagiosCGIDir=${exec_prefix}/sbin
NagiosUser=nagios
NagiosGroup=nagios
checkconfig="true"

# Source function library
# Some *nix do not have an rc.d directory, so do a test first
if [ -f /etc/rc.d/init.d/functions ]; then
	. /etc/rc.d/init.d/functions
elif [ -f /etc/init.d/functions ]; then
	. /etc/init.d/functions
elif [ -f /lib/lsb/init-functions ]; then
	. /lib/lsb/init-functions
fi

# Load any extra environment variables for Nagios and its plugins.
if test -f /etc/sysconfig/nagios; then
	. /etc/sysconfig/nagios
fi

# Automate addition of RAMDISK based on environment variables
USE_RAMDISK=${USE_RAMDISK:-0}
if test "$USE_RAMDISK" -ne 0 && test "$RAMDISK_SIZE"X != "X"; then
	ramdisk=`mount |grep "${RAMDISK_DIR} type tmpfs"`
	if [ "$ramdisk"X == "X" ]; then
		mkdir -p -m 0755 ${RAMDISK_DIR}
		mount -t tmpfs -o size=${RAMDISK_SIZE}m tmpfs ${RAMDISK_DIR}
		mkdir -p -m 0755 ${RAMDISK_DIR}/checkresults
		chown -R $NagiosUser:$NagiosGroup ${RAMDISK_DIR}
	fi
fi


check_config ()
{
	TMPFILE=$(mktemp /tmp/.configtest.XXXXXXXX)
	$NagiosBin -vp $NagiosCfgFile > "$TMPFILE"
	WARN=`grep ^"Total Warnings:" "$TMPFILE" |awk -F: '{print \$2}' |sed s/' '//g`
	ERR=`grep ^"Total Errors:" "$TMPFILE" |awk -F: '{print \$2}' |sed s/' '//g`

	if test "$WARN" = "0" && test "${ERR}" = "0"; then
		echo "OK - Configuration check verified" > $NagiosCfgtestFile
		chmod 0644 $NagiosCfgtestFile
		chown $NagiosUser:$NagiosGroup $NagiosCfgtestFile
		/bin/rm "$TMPFILE"
		return 0
	elif test "${ERR}" = "0"; then
		# Write the errors to a file we can have a script watching for.
		echo "WARNING: Warnings in config files - see log for details: $NagiosCfgtestFile" > $NagiosCfgtestFile
		egrep -i "(^warning|^error)" "$TMPFILE" >> $NagiosCfgtestFile
		chmod 0644 $NagiosCfgtestFile
		chown $NagiosUser:$NagiosGroup $NagiosCfgtestFile
		/bin/rm "$TMPFILE"
		return 0
	else
		# Write the errors to a file we can have a script watching for.
		echo "ERROR: Errors in config files - see log for details: $NagiosCfgtestFile" > $NagiosCfgtestFile
		egrep -i "(^warning|^error)" "$TMPFILE" >> $NagiosCfgtestFile
		chmod 0644 $NagiosCfgtestFile
		chown $NagiosUser:$NagiosGroup $NagiosCfgtestFile
		cat "$TMPFILE"
		exit 8
	fi
}


status_nagios ()
{
	if test -x $NagiosCGI/daemonchk.cgi; then
		if $NagiosCGI/daemonchk.cgi -l $NagiosRunFile > /dev/null 2>&1; then return 0; fi
	else
		if ps -p $NagiosPID > /dev/null 2>&1; then return 0; fi
	fi

	return 1
}

printstatus_nagios ()
{
	if status_nagios; then
		echo "nagios (pid $NagiosPID) is running..."
	else
		echo "nagios is not running"
	fi
}

killproc_nagios ()
{
	kill -s "$1" $NagiosPID
}

pid_nagios ()
{
	if test ! -f $NagiosRunFile; then
		echo "No lock file found in $NagiosRunFile"
		exit 1
	fi

	NagiosPID=`head -n 1 $NagiosRunFile`
}



# Check that nagios exists.
if [ ! -f $NagiosBin ]; then
    echo "Executable file $NagiosBin not found. Exiting."
    exit 1
fi

# Check that nagios.cfg exists.
if [ ! -f $NagiosCfgFile ]; then
    echo "Configuration file $NagiosCfgFile not found. Exiting."
    exit 1
fi

# See how we were called.
case "$1" in

	start)
		echo -n "Starting nagios:"

		if test "$checkconfig" = "true"; then
			check_config
			# check_config exits on configuration errors.
		fi

		if test -f $NagiosRunFile; then
			NagiosPID=`head -n 1 $NagiosRunFile`
			if status_nagios; then
				echo " another instance of nagios is already running."
				exit 0
			fi
		fi

		touch $NagiosVarDir/nagios.log $NagiosRetentionFile
		rm -f $NagiosCommandFile
		touch $NagiosRunFile
		chown $NagiosUser:$NagiosGroup $NagiosRunFile $NagiosVarDir/nagios.log $NagiosRetentionFile
		$NagiosBin -d $NagiosCfgFile
		if [ -d $NagiosLockDir ]; then touch $NagiosLockDir/$NagiosLockFile; fi

		echo " done."
		;;

	stop)
		echo -n "Stopping nagios:"

		pid_nagios
		killproc_nagios TERM

		# now we have to wait for nagios to exit and remove its
		# own NagiosRunFile, otherwise a following "start" could
		# happen, and then the exiting nagios will remove the
		# new NagiosRunFile, allowing multiple nagios daemons
		# to (sooner or later) run - John Sellens
		#echo -n 'Waiting for nagios to exit .'
		for i in 1 2 3 4 5 6 7 8 9 10 ; do
			if status_nagios > /dev/null; then
				echo -n '.'
				sleep 1
			else
				break
			fi
		done
		if status_nagios > /dev/null; then
			echo ''
			echo 'Warning - nagios did not exit in a timely manner'
		else
			echo ' done.'
		fi

		rm -f $NagiosStatusFile $NagiosRunFile $NagiosLockDir/$NagiosLockFile $NagiosCommandFile
		;;

	status)
		pid_nagios
		printstatus_nagios
		;;

	checkconfig)
		if test "$checkconfig" = "true"; then
			printf "Running configuration check...\n"
			check_config
		fi

		if [ $? -eq 0 ]; then
			echo " OK."
		else
			echo " CONFIG ERROR!  Check your Nagios configuration."
			exit 1
		fi
		;;

	restart)
		if test "$checkconfig" = "true"; then
			printf "Running configuration check...\n"
			check_config
		fi

		$0 stop
		$0 start
		;;

	reload|force-reload)
		if test "$checkconfig" = "true"; then
			printf "Running configuration check...\n"
			check_config
		fi

		if test ! -f $NagiosRunFile; then
			$0 start
		else
			pid_nagios
			if status_nagios > /dev/null; then
				printf "Reloading nagios configuration...\n"
				killproc_nagios HUP
				echo "done"
			else
				$0 stop
				$0 start
			fi
		fi
		;;

	configtest)
		$NagiosBin -vp $NagiosCfgFile
		;;

	*)
		echo "Usage: nagios {start|stop|restart|reload|force-reload|status|checkconfig|configtest}"
		exit 1
		;;

esac

Code: Select all

-rw-r--r--. 1 nagios nagios 5 Nov 28 11:08 /var/run/nagios/nagios.pid

Code: Select all

NagiosRunFile=${prefix}/var/nagios.lock

Code: Select all

NagiosRunFile=/var/run/nagios/nagios.pid