Page 1 of 1
2011R2.2 error in Unconfigured Passive Object Monitoring Wiz
Posted: Wed Mar 07, 2012 8:02 pm
by nagiosadmin42
I just upgraded to 2011R2.2, and am getting an error in the Unconfigured Passive Object Monitoring Wizard at Step 5:
Invalid notification delay.
There are only two choices on the form:
Code: Select all
When a problem is detected...
( ) Don't send any notifications
(x) Send a notification immediately
I have the default option selected.
I was doing this successfully before the upgrade.
Any idea on what broke?
Thanks.
Re: 2011R2.2 error in Unconfigured Passive Object Monitoring
Posted: Thu Mar 08, 2012 1:31 pm
by scottwilkerson
This is a know issue and we are working on a patch... Will report back once we have one.
Re: 2011R2.2 error in Unconfigured Passive Object Monitoring
Posted: Thu Mar 08, 2012 7:53 pm
by nagiosadmin42
Btw, I got back to this today, and found that the config wizard completes successfully if I simply press Finish on Step 4.
Re: 2011R2.2 error in Unconfigured Passive Object Monitoring
Posted: Thu Mar 08, 2012 8:00 pm
by dworthcsl
I am not sure if it is know, but I got the same error listed above with the snmp trap wizard.
Re: 2011R2.2 error in Unconfigured Passive Object Monitoring
Posted: Fri Mar 09, 2012 10:23 am
by mguthrie
Here's a hotfix for this issue. It will be in the 2011R2.3 release of XI, but it could be a a few weeks until we have that out. Download and unzip the attached file, and and copy the php file to the following location:
/usr/local/nagiosxi/html/config
Re: 2011R2.2 error in Unconfigured Passive Object Monitoring
Posted: Fri Mar 09, 2012 10:41 am
by dworthcsl
This fixed the snmp trap wizard. Thanks.