Page 1 of 2
Listing the routing OSPF mikrotik
Posted: Thu Jan 03, 2019 8:28 am
by pintu
I need to check the routing route in my mikrotik, Is there a path on OSPF 0.0.0.0?
I used this forum:
https://forum.mikrotik.com/viewtopic.php?t=51835
I also downloaded check_ospf2 script (
https://exchange.nagios.org/directory/P ... f2/details)
but I don't think I can use it because I have it all the time:
Code: Select all
check_ospf.pl v$Revision: 0.1 $ (nagios-plugins 2.2.1)
The nagios plugins come with ABSOLUTELY NO WARRANTY. You may redistribute
copies of the plugins under the terms of the GNU General Public License.
For more information about these matters, see the file named COPYING.
Re: Listing the routing OSPF mikrotik
Posted: Thu Jan 03, 2019 9:23 am
by scottwilkerson
How are you trying to run the plugin? With what arguments?
Re: Listing the routing OSPF mikrotik
Posted: Tue Jan 08, 2019 11:07 am
by pintu
various, example:
./check_ospf.0.1.pl -H Hostaddress -C public -V 2 -p 161
./check_ospf.0.1.pl -H Hostaddress -C public -V SNMP v2c
Re: Listing the routing OSPF mikrotik
Posted: Tue Jan 08, 2019 12:13 pm
by scottwilkerson
should be
Code: Select all
./check_ospf.0.1.pl -H Hostaddress -C public -v v2c
Re: Listing the routing OSPF mikrotik
Posted: Wed Jan 09, 2019 5:54 am
by pintu
./check_ospf.0.1.pl -H Hostaddress -C public -V SNMP v2c
Code: Select all
Value "v2c" invalid for option v (number expected)
Usage:
check_ospf.0.1.pl -H <HOSTNAME> [-C <community>] -p <peer>
check_ospf.0.1.pl [-h | --help]
check_ospf.0.1.pl [-V | --version]
Code: Select all
./check_ospf.0.1.pl -h
check_ospf.0.1.pl v$Revision: 0.1 $ (nagios-plugins 2.2.1)
The nagios plugins come with ABSOLUTELY NO WARRANTY. You may redistribute
copies of the plugins under the terms of the GNU General Public License.
For more information about these matters, see the file named COPYING.
Copyright (c) 2006 Larry Low
This program is licensed under the terms of the
GNU General Public License
(check source code for details)
Check OSPF peer status via SNMP.
Usage:
check_ospf.0.1.pl -H <HOSTNAME> [-C <community>] -p <peer>
check_ospf.0.1.pl [-h | --help]
check_ospf.0.1.pl [-V | --version]
-H (--hostname) Hostname to query - (required)
-C (--community) SNMP read community or v3 auth (defaults to public)
(v3 specified as username:authpassword:... )
username = SNMPv3 security name
authpassword = SNMPv3 authentication pass phrase (or hexidecimal key)
authprotocol = SNMPv3 authentication protocol (md5 (default) or sha)
privpassword = SNMPv3 privacy pass phrase (or hexidecmal key)
privprotocol = SNMPv3 privacy protocol (des (default) or aes)
-v (--snmp_version) 1 for SNMP v1
2 for SNMP v2c (default)
3 for SNMP v3
-p {--peer} IP of peer
-V (--version) Plugin version
-h (--help) usage help
Send email to help@nagios-plugins.org if you have questions regarding use
of this software. To submit patches or suggest improvements, send email to
devel@nagios-plugins.org. Please include version information with all
correspondence (when possible, use output from the --version option of the
plugin itself).
Re: Listing the routing OSPF mikrotik
Posted: Wed Jan 09, 2019 9:19 am
by scottwilkerson
looking at the help again it should be
Code: Select all
./check_ospf.0.1.pl -H Hostaddress -C public -v 2
Sorry I can't test this because I don't have the equipment
Re: Listing the routing OSPF mikrotik
Posted: Fri Jan 11, 2019 5:04 pm
by pintu
./check_ospf.0.1.pl -H Hostaddress -C public -v 2
Usage:
check_ospf.0.1.pl -H <HOSTNAME> [-C <community>] -p <peer>
check_ospf.0.1.pl [-h | --help]
check_ospf.0.1.pl [-V | --version]
so I asked this forum how to check OSPF mikrotik
Re: Listing the routing OSPF mikrotik
Posted: Fri Jan 11, 2019 5:57 pm
by scottwilkerson
You would need to also pass the peer per the usage
Re: Listing the routing OSPF mikrotik
Posted: Mon Jan 14, 2019 5:31 am
by pintu
I've added
Code: Select all
./check_ospf.0.1.pl -H Hostaddress -C public -v 2 -p 192.168.1.0/24
I get:
Code: Select all
UNKNOWN: SNMP error: The OBJECT IDENTIFIER value "1.3.6.1.2.1.14.10.1.3.192.168.1.0/24.0" is expected in dotted decimal notatio
when typing without a subnet mask, then you will get:
./check_ospf.0.1.pl -H Hostaddress -C public -v 2 -p 192.168.1.0
Use of uninitialized value in concatenation (.) or string at ./check_ospf.0.1.pl line 141.
Argument "noSuchObject" isn't numeric in numeric eq (==) at ./check_ospf.0.1.pl line 143.
CRITICAL - 192.168.1.0 (Router ID noSuchObject) state is
Lines 141 i 143:
Code: Select all
$output = "$peer (Router ID $ospfNbrRtrId) state is ".$ospfNbrStates{$ospfNbrState};
if (($ospfNbrState == 4) || ($ospfNbrState == 8)) {
Re: Listing the routing OSPF mikrotik
Posted: Mon Jan 14, 2019 12:54 pm
by scottwilkerson
This looks like your router isn't responding with a correct response for that OID
What version of Mikrotik are you using?
Can you run these replacing Hostaddress with your Mikrotik?
Code: Select all
snmpget -v 2c -c public Hostaddress .1.3.6.1.2.1.4.21.1.7.0.0.0.0
snmpget -v 2c -c public Hostaddress .1.3.6.1.2.1.4.21.1.7.192.168.1.0