Page 1 of 1
check_dhcp_snmp plugin
Posted: Wed Feb 06, 2019 2:03 am
by gcrodaje
Hi,
Would like to seek your assistance on check_dhcp_snmp plugin.
Code: Select all
[root@localhost ~]# /usr/local/nagios/libexec/check_dhcp_snmp.pl -H 10.162.x.x -C snmp_community -w 20 -c 10
DHCP_SNMP UNKNOWN - Failed to retrieve results from primary (10.162.x.x), and no backup server defined
Is there anything else need to be configured at the dhcp server side?
Any suggestion would be very much appreciated.
Thank you very much.
Re: check_dhcp_snmp plugin
Posted: Wed Feb 06, 2019 2:18 am
by gcrodaje
Hi,
Please see additional information.
Code: Select all
[root@localhost libexec]# snmpwalk -v 2c -c nagiosmonitor 10.162.x.x 1
Timeout: No Response from 10.162.x.x
Code: Select all
[root@localhost libexec]# ping -c 3 10.162.x.x
PING 10.162.x.x (10.162.x.x) 56(84) bytes of data.
64 bytes from 10.162.x.x: icmp_seq=1 ttl=128 time=1.20 ms
64 bytes from 10.162.x.x: icmp_seq=2 ttl=128 time=0.744 ms
64 bytes from 10.162.x.x: icmp_seq=3 ttl=128 time=0.540 ms
--- 10.162.x.x ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2010ms
rtt min/avg/max/mdev = 0.540/0.830/1.208/0.281 ms
Thank you very much.
Re: check_dhcp_snmp plugin
Posted: Wed Feb 06, 2019 2:31 am
by gcrodaje
Hi,
Please see additional information.
1.Linux Distribution and version? CentOS Linux 7 (Core)
2.32 or 64bit? x86-64
3.VMware Image or Manual Install of XI? Manual Installation
4.Are there special configurations on your system, ie; is Gnome installed? Yes. Are you using a proxy? No. Are you using SSL? No.
5.**If you are encountering multiple issues that may not be related, start a thread for each issue
Thank you very much.
Re: check_dhcp_snmp plugin
Posted: Wed Feb 06, 2019 3:41 am
by gcrodaje
Dear Customer Support,
I managed to resolved the issue. However, upon checking on the services, the status information gave me this (No output returned from plugin)
but when I click the services, and in the overview tab, it gave me this status:
Code: Select all
(No output returned from plugin)
DHCP_SNMP OK - All scopes fine
I have the same experience in this plugin.
Code: Select all
$ /usr/local/nagios/libexec/check_flexlm.plx -p 1717 -H $HOSTNAME$
FLEXlm OK: Server is up. All Modules/Features Available.
but when I check the service status, it says (No output returned from plugin).
For your kind advise, please.
Hope to receive feedback from you guys.
Thank you very much.
Re: check_dhcp_snmp plugin
Posted: Wed Feb 06, 2019 7:52 am
by gcrodaje
Hi,
Any update on this, please.
Let me know if you need additional information to expedite on resolving this issue.
Thank you very much.
Re: check_dhcp_snmp plugin
Posted: Wed Feb 06, 2019 11:58 am
by gcrodaje
Re: check_dhcp_snmp plugin
Posted: Wed Feb 06, 2019 1:42 pm
by scottwilkerson
Can you show the current output when you run
Code: Select all
usr/local/nagios/libexec/check_dhcp_snmp.pl -H 10.162.x.x -C snmp_community -w 20 -c 10
Include any white space after running the plugin
gcrodaje wrote:Hi,
Is there anyone here in the Customer Support? I think it is better to post a thread in the General Support than here, no one is answering my query .
Our office is staffed 9am-5pm CST, support request have a 24 business hour response time
Re: check_dhcp_snmp plugin
Posted: Thu Feb 07, 2019 1:49 am
by gcrodaje
Hi scottwilkerson,
I have already raised a ticket for this concern.
Thank you very much.
Re: check_dhcp_snmp plugin
Posted: Thu Feb 07, 2019 11:42 am
by scottwilkerson
gcrodaje wrote:Hi scottwilkerson,
I have already raised a ticket for this concern.
Thank you very much.
Ok, locking thread
