Page 1 of 2
Pre-Compiled Binaries for HP-UX 11.31 (ia64)
Posted: Wed Sep 11, 2019 10:36 am
by kanagala
I am unable to configure HP-UX 11.31 ia64 Integrity server NRPE agent from source .Need help on Pre-Compiled Binaries for HP-UX 11.31 (ia64) Integrity server and step by step agent configuration
Re: Pre-Compiled Binaries for HP-UX 11.31 (ia64)
Posted: Wed Sep 11, 2019 5:00 pm
by cdienger
I'm not aware of a binary being available anywhere for this. Are you running into a problem with installing it from source?
Re: Pre-Compiled Binaries for HP-UX 11.31 (ia64)
Posted: Wed Sep 18, 2019 4:10 pm
by kanagala
cdienger wrote:I'm not aware of a binary being available anywhere for this. Are you running into a problem with installing it from source?
HP-UX server configured with SSH proxy monitoring
Re: Pre-Compiled Binaries for HP-UX 11.31 (ia64)
Posted: Wed Sep 18, 2019 4:58 pm
by cdienger
check_by_ssh or using SNMP to monitor HP-UX is an alternative to using an agent that a lot of people use. Let us know if you have any questions setting either up.
https://assets.nagios.com/downloads/nag ... ng_SSH.pdf
https://library.nagios.com/library/prod ... lk-wizard/
Re: Pre-Compiled Binaries for HP-UX 11.31 (ia64)
Posted: Wed Sep 18, 2019 6:17 pm
by kanagala
File system plugin not providing correct details
#./check_disk -w 10% -c 8%
DISK OK - free space: / 9699 MB (97.26% inode=99%); /stand 3250 MB (81.12% inode=100%); /var 1557 MB (19.49% inode=39%); /var/log/audit 14315 MB (58.79% inode=100%); /var/adm/syslog 4729 MB (59.67% inode=100%); /var/adm/crash 18387 MB (43.97% inode=83%); /usr 4279 MB (53.72% inode=80%); /tmp 2709 MB (16.93% inode=28%); /opt 4035 MB (33.62% inode=58%); /opt/simpana 9872 MB (99.81% inode=100%); /home 1641 MB (42.37% inode=99%); | /=272MB;9043;9244;0;10048 /stand=756MB;3628;3709;0;4032 /var=6430MB;7200;7360;0;8000 /var/log/audit=10033MB;22118;22609;0;24576 /var/adm/syslog=3195MB;7200;7360;0;8000 /var/adm/crash=23428MB;37800;38640;0;42000 /usr=3686MB;7200;7360;0;8000 /tmp=13290MB;14400;14720;0;16000 /opt=7965MB;10828;11069;0;12032 /opt/simpana=18MB;9043;9244;0;10048 /home=2232MB;3510;3588;0;3900
Please check and provide help
Re: Pre-Compiled Binaries for HP-UX 11.31 (ia64)
Posted: Thu Sep 19, 2019 11:27 am
by mbellerue
Hi kanagala,
So I see your check result, but what about it is incorrect? Is the space reported not lining up with what df shows on the system?
Re: Pre-Compiled Binaries for HP-UX 11.31 (ia64)
Posted: Wed Sep 25, 2019 1:37 pm
by kanagala
Threshold reached file system details not providing separately from below output
DISK CRITICAL - free space: / 9699 MB (97% inode=99%); /stand 3250 MB (81% inode=99%); /var 1568 MB (19% inode=39%); /var/log/audit 13693 MB (56% inode=99%); /var/adm/syslog 4639 MB (58% inode=99%); /var/adm/crash 18386 MB (43% inode=83%); /usr 4279 MB (53% inode=79%); /tmp 1209 MB (8% inode=27%); /opt 4035 MB (33% inode=58%); /opt/simpana 9872 MB (99% inode=99%); /home 1641 MB (42% inode=99%);| /=272MB;9043;9244;0;10048 /stand=756MB;3628;3709;0;4032 /var=6419MB;7200;7360;0;8000 /var/log/audit=10665MB;22118;22609;0;24576 /var/adm/syslog=3287MB;7200;7360;0;8000 /var/adm/crash=23428MB;37800;38640;0;42000 /usr=3686MB;7200;7360;0;8000 /tmp=13290MB;13050;13340;0;14500 /opt=7965MB;10828;11069;0;12032 /opt/simpana=18MB;9043;9244;0;10048 /home=2232MB;3510;3588;0;3900
Re: Pre-Compiled Binaries for HP-UX 11.31 (ia64)
Posted: Wed Sep 25, 2019 1:53 pm
by mbellerue
When the check_disk plugin is just provided with the warning and critical thresholds, it will check the space of all filesystems on the server. They are separated by a semicolon ( ; ), but that is not easily readable. You can specify a file system to check.
Code: Select all
check_disk /u01 -w10% -c 5%
DISK OK - free space: /u01 5529 MB (41.21% inode=80%);| /u01=7887MB;;;0;14047
Re: Pre-Compiled Binaries for HP-UX 11.31 (ia64)
Posted: Wed Sep 25, 2019 4:11 pm
by kanagala
All file systems need to mention as per your configuration
Re: Pre-Compiled Binaries for HP-UX 11.31 (ia64)
Posted: Wed Sep 25, 2019 4:27 pm
by kanagala
Created attached script to monitor file systems and working fine
Graph not updating after adding/deleting new file system and require help on how to fix file system changes on *.rrd file
Error message
2019-09-25 14:23:36 [81266] [1] RRDs::update ERROR /usr/local/nagios/share/perfdata/server/File_system_usage.rrd: found extra data on update argument: 3