Nagios Support Forum

Posted: **Fri Nov 08, 2019 5:30 am**

what should be written in the nrpe.cfg ... in order to check nfs file system mapped through IP

>>M.Y.I.P:/gluster_vol01 62G 25G 35G 42% /var/www/ase/docroot/sites/default/files

Code: Select all

root@Admin-website-drupal8:/home# df -kh
Filesystem                                      Size  Used Avail Use% Mounted on
udev                                            3.9G     0  3.9G   0% /dev
tmpfs                                           799M   96M  704M  12% /run
/dev/mapper/Apache1--website--drupal8--vg-root   31G   12G   18G  40% /
tmpfs                                           3.9G     0  3.9G   0% /dev/shm
tmpfs                                           5.0M     0  5.0M   0% /run/lock
tmpfs                                           3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/sdc                                         40G   23G   16G  60% /mnt/backups
/dev/sdb                                        148G   60G   81G  43% /mnt/nfs
/dev/sda1                                       472M   57M  391M  13% /boot
tmpfs                                           100K     0  100K   0% /run/lxcfs/controllers
M.Y.I.P:/gluster_vol01                       62G   25G   35G  42% /var/www/ase/docroot/sites/default/files
tmpfs                                           799M     0  799M   0% /run/user/117
tmpfs                                           799M     0  799M   0% /run/user/0
root@Admin-website-drupal8:/home#

Posted: **Fri Nov 08, 2019 10:34 am**

Any input

Posted: **Fri Nov 08, 2019 12:55 pm**

You can uncomment this line in nrpe.cfg:

Code: Select all

#command[check_disk]=/usr/local/nagios/libexec/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$

Or the default common.cfg contains this:

Code: Select all

command[check_disk]=/usr/local/nagios/libexec/check_disk $ARG1$

Where you would specify all the arguments to pass via check_nrpe in a single argument surrounded by quotes.

Posted: **Fri Nov 08, 2019 1:17 pm**

command[check_disk]=/usr/local/nagios/libexec/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
When I place ARG3 with M.Y.I.P:/gluster_vol01 i get error

Posted: **Fri Nov 08, 2019 1:25 pm**

Use the mount point "/var/www/ase/docroot/sites/default/files".

Posted: **Fri Nov 08, 2019 2:00 pm**

works ... many thanks ... please close the ticket

Posted: **Fri Nov 08, 2019 2:04 pm**

Will do!

Nagios Support Forum

check_disk mapped through nfs

check_disk mapped through nfs

Re: check_disk mapped through nfs

Re: check_disk mapped through nfs

Re: check_disk mapped through nfs

Re: check_disk mapped through nfs

Re: check_disk mapped through nfs

Re: check_disk mapped through nfs