Traps with Notification Prefix marked as unknown
Posted: Tue Apr 28, 2020 4:29 am
Hi all,
I have a problem with traps that are logged in snmpttunknown.log and I don't know how to solve this. I have physical server with Microsemi Adapter RAID controller installed - there is also management software called maxView which is able to send traps to local system. I configured it to send traps to my Nagios Core 4.4.5. I converted MIB file and everything should work correctly but all traps are loggen in snmpttunknown.log
I think it may be that all traps are received by nagios server with netSnmpNotificationPrefix. Example of trap marked as unknown:
Thank you for your help in advance!
Lukasz
I have a problem with traps that are logged in snmpttunknown.log and I don't know how to solve this. I have physical server with Microsemi Adapter RAID controller installed - there is also management software called maxView which is able to send traps to local system. I configured it to send traps to my Nagios Core 4.4.5. I converted MIB file and everything should work correctly but all traps are loggen in snmpttunknown.log
I think it may be that all traps are received by nagios server with netSnmpNotificationPrefix. Example of trap marked as unknown:
Code: Select all
Mon Apr 27 10:43:08 2020: Unknown trap ([color=#FF0000].1.3.6.1.4.1.8072.4.0.1010)[/color] received from RHEL-E11 at:
Value 0: RHEL-E11
Value 1: 10.122.32.67
Value 2: 2:18:09:39.82
Value 3: .1.3.6.1.4.1.8072.4.0.1010
Value 4: 10.122.32.67
Value 5: public
Value 6: .1.3.6.1.4.1.8072.4
Value 7:
Value 8:
Value 9:
Value 10:
Ent Value 0: .1.3.6.1.4.1.795.14.1.9000.2=2147483647
Ent Value 1: .1.3.6.1.4.1.795.14.1.9000.5=1
Ent Value 2: .1.3.6.1.4.1.795.14.1.9000.11=A Failed drive has been replaced: controller 1 ( Adaptec SmartRAID 3162-8i /e #8A306328FFD Physical Slot: 2405 ), channel: 0, deviceID: 1, WWN: 50000399A820139E, v
endor: HP , model: EG000300JWSJP , S/N: 9970A1Y1F2QG, firmware level: HPD1.Lukasz