Nagios Support Forum

Posted: **Wed Sep 02, 2020 9:00 pm**

Nagios Core 4.3.4

My event handler does not work at all.

I do not know how to check to see if it is even being called by the command

My event handler

Code: Select all

#!/bin/sh

case "$1" in

OK)

;;

WARNING)

;;

UNKNOWN)

;;

CRITICAL)

     case "$2" in

     SOFT)

          case "$3" in

          3)

                /usr/local/nagios/libexec/check_nrpe -H "$2" -p 5666 -c restart_service -a "$3"

                ;;
                esac

          ;;

      HARD)

               /usr/local/nagios/libexec/check_nrpe -H "$2" -p 5666 -c restart_service -a "$3"

               ;;

      esac

      ;;
esac

exit 0

My command

Code: Select all

define command{
        command_name    restart-aservice
        command_line    /usr/local/nagios/libexec/restart-aservice.sh $SERVICESTATE$ $SERVICESTATETYPE$ $SERVICEATTEMPT$ $HOSTNAME$
}

I did a tail of the nagios.log file but I saw nothing that would indicate a problem.

Is there any thing I can do to check if this works or not?

On the client the nsclient.ini is good the cmd file on the client works every time

if I run the command from the command line on the nagios server it works.

But when the event occurs it never send the request to the client.

I know this because I placed the client in debug mode running ncsp test

Here is the defined service

Code: Select all

define service {
        host_name               TGKW002
        service_description     Check All Service
        check_command           check_nrpe!checkservicestate! -a CheckAll exclude=RemoteRegistry exclude=sppsvc exclude=MapsBroker exclude=dbupdate exclude=DoSvc exclude=TrustedInstller exclude=gpsvc exclude=WbioSrvc exclude=edgeupdate
        servicegroups           AllServices
        check_interval          60
        notification_interval   60
        event_handler_enabled   1
        event_handler           restart-aservice
        use                     generic-service
        }

Any ideas or suggestions

Nagios Support Forum

Event Handler Function does not run

Event Handler Function does not run