This support forum board is for support questions relating to
Nagios XI , our flagship commercial network monitoring solution.
cebicnagios
Posts: 6 Joined: Thu Jun 23, 2011 6:02 pm
Post
by cebicnagios » Mon Jun 04, 2012 12:40 pm
Hello all, we are trying to deploy XI to our ESX server by using the vCenter converter Standalone. The conversion gets ALL THE WAY to 100% and then fails. The error message is:
Code: Select all
FAILED: An error occurred during the conversion: 'The operation experienced a network error'
. In the log, it says
Code: Select all
Error: Unable to clone disk C:\Users\(myusername)\Desktop\NXI-VMI\nagiosxi-2011r2.4-vmware\nagiosxi\nagiosxi.vmdk
. Has anyone ran into this and/or been able to resolve it? Your help is appreciated
Edit I have attached the log export from the converter
You do not have the required permissions to view the files attached to this post.
cebicnagios
Posts: 6 Joined: Thu Jun 23, 2011 6:02 pm
Post
by cebicnagios » Tue Jun 05, 2012 3:37 pm
I verified that the ports were allowed, and retried. The same thing happened where it got all the way to 100% and failed.
Cebic Technologies
Denver Managed Service Provider
http://www.cebic.com
Any advice or fixes provided in this post are provided on an AS IS basis with NO WARRANTY.
cebicnagios
Posts: 6 Joined: Thu Jun 23, 2011 6:02 pm
Post
by cebicnagios » Wed Jun 06, 2012 11:22 am
Anyone else have any ideas??
Cebic Technologies
Denver Managed Service Provider
http://www.cebic.com
Any advice or fixes provided in this post are provided on an AS IS basis with NO WARRANTY.
lmiltchev
Former Nagios Staff
Posts: 13587 Joined: Mon May 23, 2011 12:15 pm
Post
by lmiltchev » Wed Jun 06, 2012 4:09 pm
I was not able to recreate this issue. I converted successfully Nagios XI VMware VM using the VMware Converter, and was able to open it in our vSphere server (Version 5.0.0). What is the version of your ESX server? What is the version of the VMware Converter that you are using?
Be sure to check out our
Knowledgebase for helpful articles and solutions!
cebicnagios
Posts: 6 Joined: Thu Jun 23, 2011 6:02 pm
Post
by cebicnagios » Fri Jun 08, 2012 12:09 pm
We are using ESX Server 3i, 3.5.0, build 153875 and standalone converter 5.0.0 build 470252.
Cebic Technologies
Denver Managed Service Provider
http://www.cebic.com
Any advice or fixes provided in this post are provided on an AS IS basis with NO WARRANTY.
cebicnagios
Posts: 6 Joined: Thu Jun 23, 2011 6:02 pm
Post
by cebicnagios » Fri Jun 08, 2012 1:06 pm
It just dawned on us that we're running a pretty old version of ESX. We are reimaing our server to ESXi, so please stay tuned and we'll see how it goes.
Thanks,
Cebic Technologies
Denver Managed Service Provider
http://www.cebic.com
Any advice or fixes provided in this post are provided on an AS IS basis with NO WARRANTY.
scottwilkerson
DevOps Engineer
Posts: 19396 Joined: Tue Nov 15, 2011 3:11 pm
Location: Nagios Enterprises
Contact:
Post
by scottwilkerson » Fri Jun 08, 2012 2:48 pm
Thanks for keeping us posted...