● ncpa_listener.service - LSB: This manages the NCPA Listener service
Loaded: loaded (/etc/rc.d/init.d/ncpa_listener; bad; vendor preset: disabled)
Active: active (exited) since Thu 2021-10-28 14:15:15 EDT; 26min ago
Docs: man:systemd-sysv-generator(8)
Process: 55636 ExecStop=/etc/rc.d/init.d/ncpa_listener stop (code=exited, status=0/SUCCESS)
Process: 58583 ExecReload=/etc/rc.d/init.d/ncpa_listener reload (code=exited, status=0/SUCCESS)
Process: 55650 ExecStart=/etc/rc.d/init.d/ncpa_listener start (code=exited, status=0/SUCCESS)
Oct 28 14:15:14 638567-tlc01j01.rsp.medecision.com systemd[1]: Starting LSB: This manages the NCPA Listener service...
Oct 28 14:15:15 638567-tlc01j01.rsp.medecision.com ncpa_listener[55650]: Starting NCPA Listener: another instance seems to be running (pid 1787), exiting
Oct 28 14:15:15 638567-tlc01j01.rsp.medecision.com ncpa_listener[55650]: [FAILED]
Oct 28 14:15:15 638567-tlc01j01.rsp.medecision.com systemd[1]: Started LSB: This manages the NCPA Listener service.
Oct 28 14:41:00 638567-tlc01j01.rsp.medecision.com systemd[1]: Reloading LSB: This manages the NCPA Listener service.
Oct 28 14:41:03 638567-tlc01j01.rsp.medecision.com ncpa_listener[58583]: Stopping NCPA Listener: pid 1787 did not die
Oct 28 14:41:03 638567-tlc01j01.rsp.medecision.com ncpa_listener[58583]: [FAILED]
Oct 28 14:41:03 638567-tlc01j01.rsp.medecision.com ncpa_listener[58583]: Starting NCPA Listener: another instance seems to be running (pid 1787), exiting
Oct 28 14:41:03 638567-tlc01j01.rsp.medecision.com ncpa_listener[58583]: [FAILED]
Oct 28 14:41:03 638567-tlc01j01.rsp.medecision.com systemd[1]: Reloaded LSB: This manages the NCPA Listener service.
[root@638567-tlc01j01 log]# ps -ef | grep 1787
root 1787 2 0 Oct26 ? 00:00:48 [kcs-created]
root 58704 46041 0 14:42 pts/0 00:00:00 grep --color=auto 1787
[root@638567-tlc01j01 log]# grep ncpa /var/log/messages
Oct 26 15:39:53 638567-tlc01j01 ncpa_listener: Starting NCPA Listener: another instance seems to be running (pid 1787), exiting
Oct 26 15:39:53 638567-tlc01j01 ncpa_passive: Starting NCPA Passive: [ OK ]
Oct 26 15:39:54 638567-tlc01j01 ncpa_listener: [FAILED]
Oct 28 12:59:43 638567-tlc01j01 ncpa_listener: Stopping NCPA Listener: pid 1787 did not die
Oct 28 12:59:43 638567-tlc01j01 ncpa_listener: [FAILED]
Oct 28 12:59:43 638567-tlc01j01 ncpa_listener: Starting NCPA Listener: another instance seems to be running (pid 1787), exiting
Oct 28 12:59:43 638567-tlc01j01 ncpa_listener: [FAILED]
Oct 28 12:59:49 638567-tlc01j01 ncpa_passive: Stopping NCPA Passive: [ OK ]
Oct 28 12:59:50 638567-tlc01j01 ncpa_passive: Starting NCPA Passive: [ OK ]
Oct 28 13:02:34 638567-tlc01j01 ncpa_listener: Stopping NCPA Listener: pid 1787 did not die
Oct 28 13:02:34 638567-tlc01j01 ncpa_listener: [FAILED]
Oct 28 13:02:35 638567-tlc01j01 ncpa_listener: Starting NCPA Listener: another instance seems to be running (pid 1787), exiting
Oct 28 13:02:35 638567-tlc01j01 ncpa_listener: [FAILED]
Oct 28 13:05:55 638567-tlc01j01 ncpa_listener: Stopping NCPA Listener: pid 1787 did not die
Oct 28 13:05:55 638567-tlc01j01 ncpa_listener: [FAILED]
Oct 28 13:05:56 638567-tlc01j01 ncpa_listener: Starting NCPA Listener: another instance seems to be running (pid 1787), exiting
Oct 28 13:05:56 638567-tlc01j01 ncpa_listener: [FAILED]
Oct 28 13:10:10 638567-tlc01j01 ncpa_listener: Stopping NCPA Listener: pid 1787 did not die
Oct 28 13:10:10 638567-tlc01j01 ncpa_listener: [FAILED]
Hi Team,
I can not start up ncpa_listener even after remove and install ncpa back. Thanks,
Oct 28 13:10:10 638567-tlc01j01 ncpa_passive: Stopping NCPA Passive: [ OK ]
Oct 28 13:10:10 638567-tlc01j01 yum[48056]: Erased: ncpa-2.3.1-1.el7.x86_64
Oct 28 13:11:24 638567-tlc01j01 ncpa_listener: Starting NCPA Listener: another instance seems to be running (pid 1787), exiting
Oct 28 13:11:24 638567-tlc01j01 ncpa_listener: [FAILED]
Oct 28 13:11:24 638567-tlc01j01 ncpa_passive: Starting NCPA Passive: [ OK ]
Oct 28 13:11:24 638567-tlc01j01 yum[48325]: Installed: ncpa-2.3.1-1.el7.x86_64
Oct 28 14:15:14 638567-tlc01j01 ncpa_listener: Stopping NCPA Listener: pid 1787 did not die
Oct 28 14:15:14 638567-tlc01j01 ncpa_listener: [FAILED]
Oct 28 14:15:15 638567-tlc01j01 ncpa_listener: Starting NCPA Listener: another instance seems to be running (pid 1787), exiting
Oct 28 14:15:15 638567-tlc01j01 ncpa_listener: [FAILED]
Oct 28 14:41:03 638567-tlc01j01 ncpa_listener: Stopping NCPA Listener: pid 1787 did not die
Oct 28 14:41:03 638567-tlc01j01 ncpa_listener: [FAILED]
Oct 28 14:41:03 638567-tlc01j01 ncpa_listener: Starting NCPA Listener: another instance seems to be running (pid 1787), exiting
Oct 28 14:41:03 638567-tlc01j01 ncpa_listener: [FAILED]
[root@638567-tlc01j01 log]# cat /usr/local/ncpa/var/log/ncpa_listener.log
ncpa_listener having exited status
Re: ncpa_listener having exited status
What is the output from
Code: Select all
ps -A x -f |grep ncpa
If you didn't get an 8% raise over the course of the pandemic, you took a pay cut.
Discussion of wages is protected speech under the National Labor Relations Act, and no employer can tell you you can't disclose your pay with your fellow employees.
Discussion of wages is protected speech under the National Labor Relations Act, and no employer can tell you you can't disclose your pay with your fellow employees.
Re: ncpa_listener having exited status
Hi dchurch,
Here is the output for ps command:
nagios 48423 1 0 Oct28 ? S 1:54 /usr/local/ncpa/ncpa_passive --start
Here is the output for ps command:
nagios 48423 1 0 Oct28 ? S 1:54 /usr/local/ncpa/ncpa_passive --start
Re: ncpa_listener having exited status
Hello @titien104
Thanks for following up, want to find out it there is any security application enabled like selinux.
Verify services:
Please gather the following and send '/tmp/ncpainfo.tar.gz' via Private Message:
Let me know if you see NCPA listening on port 5693 (ss -t -p -a | grep '5693|ncpa' or netstat -an | grep -Ei 'ncpa|5693')
Thanks,
Perry
Thanks for following up, want to find out it there is any security application enabled like selinux.
Code: Select all
sestatus
Code: Select all
systemctl status ncpa_listener
Code: Select all
systemctl status ncpa_passive
Code: Select all
grep -Eir 'ncpa' /var/log/* -A 4 -B 2 > /tmp/ncpalist.txt && tar -czvf /tmp/ncpainfo.tar.gz /tmp/ncpalist.txt /usr/local/ncpa/var/log/ /usr/local/ncpa/etc/ncpa.cfg
Thanks,
Perry
Re: ncpa_listener having exited status
Hello @titien104
Thanks for following up and sending over the info to my pm inbox.
Let's go ahead and specify the ncpa IP address by replacing:
Then go ahead and restart the ncpa_listener service:
Let us know how that looks,
Perry
Thanks for following up and sending over the info to my pm inbox.
Let's go ahead and specify the ncpa IP address by replacing:
with# ip =
ip = 0.0.0.0
Code: Select all
sed -i 's/# ip =/ip = 0.0.0.0/' /usr/local/ncpa/etc/ncpa.cfg
Code: Select all
systemctl restart ncpa_listener
Perry
Re: ncpa_listener having exited status
[root@638567-tlc01j01 ~]# systemctl status ncpa_listener.service
● ncpa_listener.service - LSB: This manages the NCPA Listener service
Loaded: loaded (/etc/rc.d/init.d/ncpa_listener; bad; vendor preset: disabled)
Active: active (running) since Tue 2021-11-16 14:57:00 EST; 13s ago
Docs: man:systemd-sysv-generator(8)
Process: 32678 ExecStop=/etc/rc.d/init.d/ncpa_listener stop (code=exited, status=0/SUCCESS)
Process: 32689 ExecStart=/etc/rc.d/init.d/ncpa_listener start (code=exited, status=0/SUCCESS)
CGroup: /system.slice/ncpa_listener.service
└─32700 /usr/local/ncpa/ncpa_listener --start
Nov 16 14:57:00 638567-tlc01j01.rsp.medecision.com systemd[1]: Stopped LSB: This manages the NCPA Listener service.
Nov 16 14:57:00 638567-tlc01j01.rsp.medecision.com systemd[1]: Starting LSB: This manages the NCPA Listener service...
Nov 16 14:57:00 638567-tlc01j01.rsp.medecision.com systemd[1]: Started LSB: This manages the NCPA Listener service.
Nov 16 14:57:00 638567-tlc01j01.rsp.medecision.com ncpa_listener[32689]: Starting NCPA Listener: [ OK ]
● ncpa_listener.service - LSB: This manages the NCPA Listener service
Loaded: loaded (/etc/rc.d/init.d/ncpa_listener; bad; vendor preset: disabled)
Active: active (running) since Tue 2021-11-16 14:57:00 EST; 13s ago
Docs: man:systemd-sysv-generator(8)
Process: 32678 ExecStop=/etc/rc.d/init.d/ncpa_listener stop (code=exited, status=0/SUCCESS)
Process: 32689 ExecStart=/etc/rc.d/init.d/ncpa_listener start (code=exited, status=0/SUCCESS)
CGroup: /system.slice/ncpa_listener.service
└─32700 /usr/local/ncpa/ncpa_listener --start
Nov 16 14:57:00 638567-tlc01j01.rsp.medecision.com systemd[1]: Stopped LSB: This manages the NCPA Listener service.
Nov 16 14:57:00 638567-tlc01j01.rsp.medecision.com systemd[1]: Starting LSB: This manages the NCPA Listener service...
Nov 16 14:57:00 638567-tlc01j01.rsp.medecision.com systemd[1]: Started LSB: This manages the NCPA Listener service.
Nov 16 14:57:00 638567-tlc01j01.rsp.medecision.com ncpa_listener[32689]: Starting NCPA Listener: [ OK ]
Re: ncpa_listener having exited status
Hello @titien104
Thanks, that looks good and verify:
Please post the output of this command from your XI server:
and
or netstat -an | grep -Ei '5693'
Thanks,
Perry
Thanks, that looks good and verify:
Please post the output of this command from your XI server:
Code: Select all
nmap -p 5693 localhost
Code: Select all
sudo ss -tulpn | grep -Ei '5693'
Thanks,
Perry