I'm coming to ask for help, I'm having a problem integrating the "Nagios Core" network monitoring environment with the Firebox M690 Watchguard running in a cluster.
I did this based on the watchguard documentation, I am throwing the link here:
https://watchguard.com/help/docs/help-c ... ils_c.html
I downloaded the Fireware OS compatible with the version of the device 12.10, after installing in the directory C:Users\PublicShared WatchGuard\SNMP MIBs appeared.
But they were in .txt form - I compared them with another mib and the file structure is correct.
I tried uploading them to nagios in .txt form as well after converting them to .mib form
I created a configuration file in nagios for watchguards and defined a service that checks the CPU utilization of the system in the last 1 minute.
Code: Select all
define service {
use generic-service
host_name UTM
service_description 1 CPU
check_command check_snmp! -C public -o 1.3.6.1.4.1.3097.6.3.77 -m all
}
Unfortunately, this did not work.
I checked with SNMP Tester if the oid returns any value, and it returns SNMP_EXCEPTION_NOSUCHINSTANCE223.
Code: Select all
----------------------- New Test -----------------------
Paessler SNMP Tester - 23.3.87.552 Computername: TERMINAL
14.11.2023 09:05:25 (71 ms) : Device: 172.30.1.254
14.11.2023 09:05:25 (96 ms) : SNMP v2c
14.11.2023 09:05:25 (116 ms) : Custom OID 1.3.6.1.4.1.3097.6.3.77
14.11.2023 09:05:25 (267 ms) : SNMP Datatype: SNMP_EXCEPTION_NOSUCHINSTANCE
14.11.2023 09:05:25 (290 ms) : -------
14.11.2023 09:05:25 (313 ms) : Value: #N SNMP_EXCEPTION_NOSUCHINSTANCE223
14.11.2023 09:05:25 (340 ms) : Done
Then I found in the article attached above information about third party mibs, I checked the mib whose result should be "CPU 1 minute load"
And it returns the correct value.
Code: Select all
----------------------- New Test -----------------------
Paessler SNMP Tester - 23.3.87.552 Computername: TERMINAL
14.11.2023 09:09:27 (78 ms) : Device: 172.30.1.254
14.11.2023 09:09:27 (108 ms) : SNMP v2c
14.11.2023 09:09:27 (140 ms) : Custom OID 1.3.6.1.4.1.2021.10.1.3.1
14.11.2023 09:09:27 (319 ms) : SNMP Datatype: ASN_OCTET_STR
14.11.2023 09:09:27 (347 ms) : -------
14.11.2023 09:09:27 (368 ms) : Value: 0.24
14.11.2023 09:09:27 (390 ms) : Done
This is where I come in for help, if anyone has an idea and is able to point me in the direction of where I can get this to work then I would greatly appreciate it.
PS
I was already on the watchguard forum, unfortunately I was referred here after checking everything that was offered to me :/