Problems with fractional numbers in reports.
Posted: Tue Sep 04, 2012 6:48 am
FreeBSD 8.3+nagiod-3.3.1
I have problem with fractional numbers in reports form NSClient++-0.3.9.
For example:
/usr/local/nagios/libexec/check_nt -H 10.10.10.2 -p 12489 -v USEDDISKSPACE -l "c"
c:\ - total: 60.00 Gb - used: 34.40 Gb (57%) - free 25.60 Gb (43%) | 'c:\ Used Space'=34.40Gb;0.00;0.00;0.00;60.00
It's ok.
But:
/usr/local/nagios/libexec/check_nt -H 10.10.10.2 -p 12489 -v COUNTER -l "\\PhysicalDisk(0 C:)\\Avg.Disk sec/Write"
0
It is impossible! If I open perfmon in Windows Server 2008 R2 SP1, I see that the values are 0.001, 0.012, 0.024 sec. How can I see this fractional numbers in Nagios report?
I have problem with fractional numbers in reports form NSClient++-0.3.9.
For example:
/usr/local/nagios/libexec/check_nt -H 10.10.10.2 -p 12489 -v USEDDISKSPACE -l "c"
c:\ - total: 60.00 Gb - used: 34.40 Gb (57%) - free 25.60 Gb (43%) | 'c:\ Used Space'=34.40Gb;0.00;0.00;0.00;60.00
It's ok.
But:
/usr/local/nagios/libexec/check_nt -H 10.10.10.2 -p 12489 -v COUNTER -l "\\PhysicalDisk(0 C:)\\Avg.Disk sec/Write"
0
It is impossible! If I open perfmon in Windows Server 2008 R2 SP1, I see that the values are 0.001, 0.012, 0.024 sec. How can I see this fractional numbers in Nagios report?