Page 1 of 1
Router / Switch Configuration
Posted: Sun Mar 31, 2013 5:46 am
by narendra.badgujar
Hi,
We are not able to get any details of non standard routers like 'FirePro and Techroutes'.
Kindly suggests.
Regards,
Narendra Badgujar
Re: Router / Switch Configuration
Posted: Mon Apr 01, 2013 6:49 am
by scottwilkerson
What type of detail are you looking for? Are your routers SNMP enabled?
Re: Router / Switch Configuration
Posted: Mon Apr 01, 2013 10:00 pm
by narendra.badgujar
Hi,
We are looking CPU, Memory and Bandwidth utilization monitoring.
This routers are SNMP enable.
Regards,
Narendra Badgujare.
Re: Router / Switch Configuration
Posted: Tue Apr 02, 2013 9:36 am
by slansing
Have you taken a look at our Switch and Router monitoring wizard?
Configure > Configuration Wizards > Switch and Router
You may also be able to use the SNMP monitoring wizard if you know the OID's, and MIB's of the device and service you would like to monitor.
Re: Router / Switch Configuration
Posted: Thu Apr 04, 2013 11:30 am
by narendra.badgujar
We have OID's and MIB's of the device.
Kindly suggests, how we configure the same
Re: Router / Switch Configuration
Posted: Thu Apr 04, 2013 12:37 pm
by slansing
Have you already taken a look at the switch/router monitoring wizard? To use the MIB's and OID's you have available, you can upload the MIB's via the following menu:
Admin > Manage MIB's
And then you can run the SNMP monitoring wizard through:
Configure > Run the Monitoring Wizard > SNMP
And from here define your OID's and the MIB to use for each.