Nagios Support Forum

Sounds good. Thanks!

I did uninstall the 2.0 wizard, remove all of the old configs for 2.0, then install the 1.7 wizard and then re-add the switches. /usr/local/nagios/var/perfdata.log does not exist Here is the output for tail -25 /usr/local/nagios/var/npcd.log [02-19-2014 09:44:02] NPCD: HINT: load_threshold is enable...

Here you go [root@localhost ~]# ls -la /var/lib/mrtg total 8744 drwxr-xr-x 2 root root 4096 Feb 10 13:15 . drwxr-xr-x. 23 root root 4096 Jan 17 14:13 .. -rw-r--r-- 1 root root 105312 Feb 14 11:00 172.10.10.207_10.rrd -rw-r--r-- 1 root root 105312 Feb 14 11:00 172.10.10.207_11.rrd -rw-r--r-- 1 root r...

I successfully installed the 1.7 wizard followed the instructions in this doc http://assets.nagios.com/downloads/nagiosxi/docs/Adding_Services_To_Preexisting_Switch_or_Router.pdf Re-added my switches The ports were all found without a problem, but the bandwidth is still reporting at 0 on ports where...

Here you go.

ctmoney wrote:I am on Version 2.0 of the switch configuration wizard.

Here is the config for an interface in the mrtg.cfg file

### Interface 1 >> Descr: 'GigabitEthernet1/0/1' | Name: 'GigabitEthernet1/0/1' | Ip: '' | Eth: '30-78-32-30-66-64-66-31-39-66-34-33-66-62' ###

I am on version 2.0

There is not any output when I run that command.

This is still all from a new install though. I have not added any additional ports, or re-ran the wizard for the switches. Each time has been for a new switch.

I did not follow the steps in the referred to document, this is for adding a whole new switch not adding ports to an existing switch. Nothing in "/var/log/messages" referring to any error with the switch or monitoring bandwidth. I have not tried version 1 of the switch wizard. I will have ...

I am on Version 2.0 of the switch configuration wizard. Here is the config for an interface in the mrtg.cfg file ### Interface 1 >> Descr: 'GigabitEthernet1/0/1' | Name: 'GigabitEthernet1/0/1' | Ip: '' | Eth: '30-78-32-30-66-64-66-31-39-66-34-33-66-62' ### Target[172.10.10.207_1]: 1:public@172.10.10...