Graph is not showing in Nagios
-
imran_khan
- Posts: 196
- Joined: Mon May 27, 2013 3:16 pm
Re: Graph is not showing in Nagios
Hello,
Thanks for the reply. Please reply to my additional query.
Thanks,
Imran Khan.
Thanks for the reply. Please reply to my additional query.
Thanks,
Imran Khan.
- Box293
- Too Basu
- Posts: 5126
- Joined: Sun Feb 07, 2010 10:55 pm
- Location: Deniliquin, Australia
- Contact:
Re: Graph is not showing in Nagios
As per your nagios.cfg file you are using the following config files:imran_khan wrote:Where should I make below changes, means in which file. Please give me file name with full path. I have tried in many files but no luck.
Code: Select all
cfg_file=/usr/local/nagios/etc/objects/Linux-Team/linux-hosts.cfg
cfg_file=/usr/local/nagios/etc/objects/Linux-Team/linux-services.cfgCode: Select all
use host-pnpCode: Select all
use srv-pnpAlso, as per your nagis.cfg file:
Code: Select all
host_perfdata_file_processing_command=process-host-perfdata-file
service_perfdata_file_processing_command=process-service-perfdata-fileCode: Select all
define command{
command_name process-service-perfdata-file
command_line /bin/mv /usr/local/pnp4nagios/var/service-perfdata /usr/local/pnp4nagios/var/spool/service-perfdata.$TIMET$
}
define command{
command_name process-host-perfdata-file
command_line /bin/mv /usr/local/pnp4nagios/var/host-perfdata /usr/local/pnp4nagios/var/spool/host-perfdata.$TIMET$
}As of May 25th, 2018, all communications with Nagios Enterprises and its employees are covered under our new Privacy Policy.
-
imran_khan
- Posts: 196
- Joined: Mon May 27, 2013 3:16 pm
Re: Graph is not showing in Nagios
Hello,
I have tried mentioned setting many times and getting below error very time when verified nagios configuration using /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg command. Please suggest me on the same.
Reading configuration data...
Read main config file okay...
Error: Template 'host-pnp' specified in host definition could not be not found (config file '/usr/local/nagios/etc/objects/Linux-Team/linux-hosts.cfg', starting on line
28)
Error processing object config files!
Also command.cfg definition is as below.
define command {
command_name process-service-perfdata-file
command_line /usr/local/pnp4nagios/libexec/process_perfdata.pl --bulk=/usr/local/pnp4nagios/var/service-perfdata
}
define command {
command_name process-host-perfdata-file
command_line /usr/local/pnp4nagios/libexec/process_perfdata.pl --bulk=/usr/local/pnp4nagios/var/host-perfdata
}
Thanks,
Imran Khan.
I have tried mentioned setting many times and getting below error very time when verified nagios configuration using /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg command. Please suggest me on the same.
Reading configuration data...
Read main config file okay...
Error: Template 'host-pnp' specified in host definition could not be not found (config file '/usr/local/nagios/etc/objects/Linux-Team/linux-hosts.cfg', starting on line
28)
Error processing object config files!
Also command.cfg definition is as below.
define command {
command_name process-service-perfdata-file
command_line /usr/local/pnp4nagios/libexec/process_perfdata.pl --bulk=/usr/local/pnp4nagios/var/service-perfdata
}
define command {
command_name process-host-perfdata-file
command_line /usr/local/pnp4nagios/libexec/process_perfdata.pl --bulk=/usr/local/pnp4nagios/var/host-perfdata
}
Thanks,
Imran Khan.
- Box293
- Too Basu
- Posts: 5126
- Joined: Sun Feb 07, 2010 10:55 pm
- Location: Deniliquin, Australia
- Contact:
Re: Graph is not showing in Nagios
Can you please show us a host definition from '/usr/local/nagios/etc/objects/Linux-Team/linux-hosts.cfg' that has the line "use host-pnp".
As of May 25th, 2018, all communications with Nagios Enterprises and its employees are covered under our new Privacy Policy.
-
imran_khan
- Posts: 196
- Joined: Mon May 27, 2013 3:16 pm
Re: Graph is not showing in Nagios
Hello,
Please find the host definition details.
# example.com' host definition
define host{
use generic-host,host-pnp ; Name of host template to use
host_name example.com
alias example.com
address Server_IP
address Server_IP
check_command check-host-alive
max_check_attempts 10
notification_interval 10
notification_period 24x7
notification_options d,u,r
hostgroups ABCD,PQRST
notes_url /nagios/info/windows.html
contact_groups linuxteam
}
Thanks,
Imran Khan.
Please find the host definition details.
# example.com' host definition
define host{
use generic-host,host-pnp ; Name of host template to use
host_name example.com
alias example.com
address Server_IP
address Server_IP
check_command check-host-alive
max_check_attempts 10
notification_interval 10
notification_period 24x7
notification_options d,u,r
hostgroups ABCD,PQRST
notes_url /nagios/info/windows.html
contact_groups linuxteam
}
Thanks,
Imran Khan.
- Box293
- Too Basu
- Posts: 5126
- Joined: Sun Feb 07, 2010 10:55 pm
- Location: Deniliquin, Australia
- Contact:
Re: Graph is not showing in Nagios
Your nagios.cfg file does not have a reference to /usr/local/nagios/etc/objects/Defination/templates.cfgimran_khan wrote:I have put the below content in /usr/local/nagios/etc/objects/Defination/templates.cfg file.
define host {
name host-pnp
action_url /pnp4nagios/index.php/graph?host=$HOSTNAME$&srv=_HOST_
register 0
}
define service {
name srv-pnp
action_url /pnp4nagios/index.php/graph?host=$HOSTNAME$&srv=$SERVICEDESC$
register 0
}
Add the following to nagios.cfg
Code: Select all
cfg_file=/usr/local/nagios/etc/objects/Defination/templates.cfgCode: Select all
/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfgAs of May 25th, 2018, all communications with Nagios Enterprises and its employees are covered under our new Privacy Policy.
-
imran_khan
- Posts: 196
- Joined: Mon May 27, 2013 3:16 pm
Re: Graph is not showing in Nagios
Hello,
Added mentioned template path in nagios configuration file. now getting below error.
Reading configuration data...
Read main config file okay...
Warning: Duplicate definition found for host 'generic-host' (config file '/usr/local/nagios/etc/objects/Defination/templates.cfg', starting on line 52)
Error: Could not add object property in file '/usr/local/nagios/etc/objects/Defination/templates.cfg' on line 53.
Error processing object config files!
Thanks,
Imran Khan.
Added mentioned template path in nagios configuration file. now getting below error.
Reading configuration data...
Read main config file okay...
Warning: Duplicate definition found for host 'generic-host' (config file '/usr/local/nagios/etc/objects/Defination/templates.cfg', starting on line 52)
Error: Could not add object property in file '/usr/local/nagios/etc/objects/Defination/templates.cfg' on line 53.
Error processing object config files!
Thanks,
Imran Khan.
- Box293
- Too Basu
- Posts: 5126
- Joined: Sun Feb 07, 2010 10:55 pm
- Location: Deniliquin, Australia
- Contact:
Re: Graph is not showing in Nagios
Please post the contents of config file '/usr/local/nagios/etc/objects/Defination/templates.cfg'
As of May 25th, 2018, all communications with Nagios Enterprises and its employees are covered under our new Privacy Policy.
-
imran_khan
- Posts: 196
- Joined: Mon May 27, 2013 3:16 pm
Re: Graph is not showing in Nagios
Hello,
Please find the content of /usr/local/nagios/etc/objects/Defination/templates.cfg file.
Thanks,
Imran Khan.
Please find the content of /usr/local/nagios/etc/objects/Defination/templates.cfg file.
Code: Select all
###############################################################################
###############################################################################
#
# CONTACT TEMPLATES
#
###############################################################################
###############################################################################
# Generic contact definition template - This is NOT a real contact, just a template!
define contact{
name generic-contact ; The name of this contact template
service_notification_period 24x7 ; service notifications can be sent anytime
host_notification_period 24x7 ; host notifications can be sent anytime
service_notification_options w,u,c,r,f,s ; send notifications for all service states, flapping events, and scheduled downtime events
host_notification_options d,u,r,f,s ; send notifications for all host states, flapping events, and scheduled downtime events
service_notification_commands notify-service-by-email ; send service notifications via email
host_notification_commands notify-host-by-email ; send host notifications via email
register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL CONTACT, JUST A TEMPLATE!
}
###############################################################################
###############################################################################
#
# HOST TEMPLATES
#
###############################################################################
###############################################################################
# Generic host definition template - This is NOT a real host, just a template!
define host{
name generic-host ; The name of this host template
notifications_enabled 1 ; Host notifications are enabled
event_handler_enabled 1 ; Host event handler is enabled
flap_detection_enabled 1 ; Flap detection is enabled
failure_prediction_enabled 1 ; Failure prediction is enabled
process_perf_data 1 ; Process performance data
retain_status_information 1 ; Retain status information across program restarts
retain_nonstatus_information 1 ; Retain non-status information across program restarts
notification_period 24x7 ; Send host notifications at any time
register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
}
# Linux host definition template - This is NOT a real host, just a template!
define host{
name linux-server ; The name of this host template
use generic-host ; This template inherits other values from the generic-host template
check_period 24x7 ; By default, Linux hosts are checked round the clock
check_interval 5 ; Actively check the host every 5 minutes
retry_interval 1 ; Schedule host check retries at 1 minute intervals
max_check_attempts 10 ; Check each Linux host 10 times (max)
check_command check-host-alive ; Default command to check Linux hosts
notification_period workhours ; Linux admins hate to be woken up, so we only notify during the day
; Note that the notification_period variable is being overridden from
; the value that is inherited from the generic-host template!
notification_interval 120 ; Resend notifications every 2 hours
notification_options d,u,r ; Only send notifications for specific host states
contact_groups admins ; Notifications get sent to the admins by default
register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
}
# Windows host definition template - This is NOT a real host, just a template!
define host{
name windows-server ; The name of this host template
use generic-host ; Inherit default values from the generic-host template
check_period 24x7 ; By default, Windows servers are monitored round the clock
check_interval 5 ; Actively check the server every 5 minutes
retry_interval 1 ; Schedule host check retries at 1 minute intervals
max_check_attempts 10 ; Check each server 10 times (max)
check_command check-host-alive ; Default command to check if servers are "alive"
notification_period 24x7 ; Send notification out at any time - day or night
notification_interval 30 ; Resend notifications every 30 minutes
notification_options d,r ; Only send notifications for specific host states
contact_groups admins ; Notifications get sent to the admins by default
hostgroups windows-servers ; Host groups that Windows servers should be a member of
register 0 ; DONT REGISTER THIS - ITS JUST A TEMPLATE
}
# We define a generic printer template that can be used for most printers we monitor
define host{
name generic-printer ; The name of this host template
use generic-host ; Inherit default values from the generic-host template
check_period 24x7 ; By default, printers are monitored round the clock
check_interval 5 ; Actively check the printer every 5 minutes
retry_interval 1 ; Schedule host check retries at 1 minute intervals
max_check_attempts 10 ; Check each printer 10 times (max)
check_command check-host-alive ; Default command to check if printers are "alive"
notification_period workhours ; Printers are only used during the workday
notification_interval 30 ; Resend notifications every 30 minutes
notification_options d,r ; Only send notifications for specific host states
contact_groups admins ; Notifications get sent to the admins by default
register 0 ; DONT REGISTER THIS - ITS JUST A TEMPLATE
}
# Define a template for switches that we can reuse
define host{
name generic-switch ; The name of this host template
use generic-host ; Inherit default values from the generic-host template
check_period 24x7 ; By default, switches are monitored round the clock
check_interval 5 ; Switches are checked every 5 minutes
retry_interval 1 ; Schedule host check retries at 1 minute intervals
max_check_attempts 10 ; Check each switch 10 times (max)
check_command check-host-alive ; Default command to check if routers are "alive"
notification_period 24x7 ; Send notifications at any time
notification_interval 30 ; Resend notifications every 30 minutes
notification_options d,r ; Only send notifications for specific host states
contact_groups admins ; Notifications get sent to the admins by default
register 0 ; DONT REGISTER THIS - ITS JUST A TEMPLATE
}
###############################################################################
###############################################################################
#
# SERVICE TEMPLATES
#
###############################################################################
###############################################################################
# Generic service definition template - This is NOT a real service, just a template!
define service{
name generic-service ; The 'name' of this service template
active_checks_enabled 1 ; Active service checks are enabled
passive_checks_enabled 1 ; Passive service checks are enabled/accepted
parallelize_check 1 ; Active service checks should be parallelized (disabling this can lead to major performance problems)
obsess_over_service 1 ; We should obsess over this service (if necessary)
check_freshness 0 ; Default is to NOT check service 'freshness'
notifications_enabled 1 ; Service notifications are enabled
event_handler_enabled 1 ; Service event handler is enabled
flap_detection_enabled 1 ; Flap detection is enabled
failure_prediction_enabled 1 ; Failure prediction is enabled
process_perf_data 1 ; Process performance data
retain_status_information 1 ; Retain status information across program restarts
retain_nonstatus_information 1 ; Retain non-status information across program restarts
is_volatile 0 ; The service is not volatile
check_period 24x7 ; The service can be checked at any time of the day
max_check_attempts 3 ; Re-check the service up to 3 times in order to determine its final (hard) state
normal_check_interval 10 ; Check the service every 10 minutes under normal conditions
retry_check_interval 2 ; Re-check the service every two minutes until a hard state can be determined
contact_groups admins ; Notifications get sent out to everyone in the 'admins' group
notification_options w,u,c,r ; Send notifications about warning, unknown, critical, and recovery events
notification_interval 60 ; Re-notify about service problems every hour
notification_period 24x7 ; Notifications can be sent out at any time
register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
}
# Local service definition template - This is NOT a real service, just a template!
define service{
name local-service ; The name of this service template
use generic-service ; Inherit default values from the generic-service definition
max_check_attempts 4 ; Re-check the service up to 4 times in order to determine its final (hard) state
normal_check_interval 5 ; Check the service every 5 minutes under normal conditions
retry_check_interval 1 ; Re-check the service every minute until a hard state can be determined
register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
}
define host {
name host-pnp
action_url /pnp4nagios/index.php/graph?host=$HOSTNAME$&srv=_HOST_
register 0
}
define service {
name srv-pnp
action_url /pnp4nagios/index.php/graph?host=$HOSTNAME$&srv=$SERVICEDESC$
register 0
}
Thanks,
Imran Khan.
- Box293
- Too Basu
- Posts: 5126
- Joined: Sun Feb 07, 2010 10:55 pm
- Location: Deniliquin, Australia
- Contact:
Re: Graph is not showing in Nagios
It looks like you copied an existing template file and used it for Defination/templates.cfg.
I would:
I would:
- Make a backup copy of the file
Remove all entries in the file except for:Validate the configuration:Code: Select all
define host { name host-pnp action_url /pnp4nagios/index.php/graph?host=$HOSTNAME$&srv=_HOST_ register 0 } define service { name srv-pnp action_url /pnp4nagios/index.php/graph?host=$HOSTNAME$&srv=$SERVICEDESC$ register 0 }Code: Select all
/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
As of May 25th, 2018, all communications with Nagios Enterprises and its employees are covered under our new Privacy Policy.