Upgrade Fail NagiosXI 2014R2.2

[fbourdier]

Hi Team,

I have a problem when I want upgrade XI 2014R2.0 to 2014R2.2.

Install.log say me a problem on /etc/sudoers for create NagiosXI ...

I don't understand because I have no errors.

I send a F5 on my web page Nagios in R2.2 but when I try to change an Alias for example and I apply configuration. I have a error in my .cfg on ghost phantom.

Sorry I forget, I use a template NagiosXI 32Bits 2014R2.0 on virtual machine

King regards
Flo

[lmiltchev]

Can you post the entire install.log file?

[fbourdier]

Sorry I have a problem to post my install.log but end of message is :

Things look okay - No serious problems were detected during the pre-flight check
RET: 0
sudo: >>> /etc/sudoers: Alias `NAGIOSXI' already defined near line 123 <<<
sudo: parse error in /etc/sudoers near line 123
sudo: no valid sudoers sources found, quitting
sudo: unable to initialize policy plugin


And my sudoers :

# ASTERISK-SPECIFIC CHECKS
# NOTE: You can uncomment the following line if you are monitoring Asterisk locally
#nagios ALL=NOPASSWD: /usr/local/nagios/libexec/check_asterisk_sip_peers.sh, /usr/local/nagios/libexec/nagisk.pl, /usr/sbin/asterisk

User_Alias NAGIOSXI=nagios
User_Alias NAGIOSXIWEB=apache
NAGIOSXI ALL = NOPASSWD:/etc/init.d/nagios start
NAGIOSXI ALL = NOPASSWD:/etc/init.d/nagios stop
NAGIOSXI ALL = NOPASSWD:/etc/init.d/nagios restart
NAGIOSXI ALL = NOPASSWD:/etc/init.d/nagios reload
NAGIOSXI ALL = NOPASSWD:/etc/init.d/nagios status
NAGIOSXI ALL = NOPASSWD:/etc/init.d/nagios checkconfig
NAGIOSXI ALL = NOPASSWD:/etc/init.d/ndo2db start
NAGIOSXI ALL = NOPASSWD:/etc/init.d/ndo2db stop
NAGIOSXI ALL = NOPASSWD:/etc/init.d/ndo2db restart
NAGIOSXI ALL = NOPASSWD:/etc/init.d/ndo2db reload
NAGIOSXI ALL = NOPASSWD:/etc/init.d/ndo2db status
NAGIOSXI ALL = NOPASSWD:/etc/init.d/npcd start
NAGIOSXI ALL = NOPASSWD:/etc/init.d/npcd stop
NAGIOSXI ALL = NOPASSWD:/etc/init.d/npcd restart
NAGIOSXI ALL = NOPASSWD:/etc/init.d/npcd reload
NAGIOSXI ALL = NOPASSWD:/etc/init.d/npcd status
NAGIOSXI ALL = NOPASSWD:/usr/bin/nmap *
NAGIOSXI ALL = NOPASSWD:/usr/local/nagiosxi/scripts/upgrade_to_latest.sh
NAGIOSXI ALL = NOPASSWD:/usr/local/nagiosxi/scripts/change_timezone.sh
NAGIOSXI ALL = NOPASSWD:/usr/local/nagiosxi/scripts/manage_services.sh
NAGIOSXIWEB ALL = NOPASSWD:/usr/bin/tail -100 /var/log/messages
NAGIOSXIWEB ALL = NOPASSWD:/usr/bin/tail -100 /var/log/httpd/error_log
NAGIOSXIWEB ALL = NOPASSWD:/usr/bin/tail -100 /var/log/mysqld.log
NAGIOSXIWEB ALL = NOPASSWD:/usr/bin/nmap *
NAGIOSXIWEB ALL = NOPASSWD:/etc/init.d/snmptt restart
NAGIOSXIWEB ALL = NOPASSWD:/usr/local/nagiosxi/scripts/repair_databases.sh
NAGIOSXIWEB ALL = NOPASSWD:/usr/local/nagiosxi/scripts/manage_services.sh

[tgriep]

I would like to make sure but when you login to NagiosXI, it is running version 2.2?

If so, try going through this process to remove the Ghost problems with the configs.

In XI, browse to the CCM: Configure --> Core Config Manager --> Tools --> Write Config Files.

Click "Write" and then "Verify". You should receive at least one error. The text of the error should be fairly descriptive concerning which object is having issues and what those issues potentially are. If you do not see any descriptive errors, you may have issues with escalations or service/host dependencies. You will most likely want to de-activate these definitions.

Resolve the error in the Core Config Manager (CCM).

Once the detected errors are resolved, re-run the "Write" and "Verify" process from the "Write Config Files" tool. Resolve any further errors in the CCM, repeating the process above as many times as necessary until all config errors are resolved.

Only when the "Verify" process completes without and error should you proceed.

Click "Apply Configuration" - it should complete without error at this point.

If this doesn't work for you, post back the errors.

[fbourdier94]

Yes TGRIEP,

BUT upgrade is FAIL. Because when I go back on 2014R2.0, I have not any errors in CCM.

And when I update in 2014R2.2 now in 2.3, an older host come back. Then I apply my config I have an error with host (for example toto.cfg)

In CCM I HAVE NOT ANY HOST or Service toto.cfg ...

I have post my install.log for information and I thnik it's not the good end of update.

Several people have same problem.

[tgriep]

Can you run the following command and post the output.

Code: Select all

ll -r /etc/su*

[fbourdier94]

:~# ll -r /etc/su*
-rw-r----- 1 root root 3181 Jul 31 13:00 /etc/sudo-ldap.conf
-r--r----- 1 root root 4002 Mar 1 2012 /etc/sudoers.rpmnew
-r--r----- 1 root root 5528 Dec 9 09:51 /etc/sudoers
-rw-r----- 1 root root 1786 Sep 25 2012 /etc/sudo.conf

/etc/sudoers.d:
total 4
-r--r----- 1 root root 1003 Feb 13 2012 nagiosxi

[fbourdier94]

Hi,

I have found problem.

I have read script ./upgrade

In this script, he call ./xi-sys.cfg and in this file you can see

# Add new sudoers entries
cat nagiosxi/nagiosxi.sudoers >> /etc/sudoers

When I go in my folder /etc/sudoers.d/ , I found a /etc/sudoers.d/nagiosxi.

I move this file in my /tmp : mv /etc/sudoers.d/nagiosxi /tmp/nagiosxi-sudoers

I apply my upgrade and upgrade is COMPLETED

[fbourdier94]

But I have a problem for bandwidth

Every checks are in warning because Warning and Critical have changed

[Box293]

Every checks are in warning because Warning and Critical have changed

Can you please provide some more detail, where have they changed? Screenshots help.