Failure during apply configuration

[larp]

When I try to apply configuration I get the error in capture.jpg and when I look in snapshot there is no error file see capture 2.jpg.

If I look in the file that should be in error I see no errors see ANA DB host.cfg in line 96 as the error text in capure.jpg suggest.

The file permission is ok see capture 3.jpg and none of the filesystems are full:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/systemvg-rootlv 1998672 802544 1091272 43% /
tmpfs 16343512 0 16343512 0% /dev/shm
/dev/sda2 487652 68267 393785 15% /boot
/dev/sda1 204580 256 204324 1% /boot/efi
/dev/mapper/systemvg-instlv 8125880 6620852 1085600 86% /export/install
/dev/mapper/systemvg-homelv 1998672 454620 1439196 25% /home
/dev/mapper/systemvg-optlv 1998672 670592 1223224 36% /opt
/dev/mapper/systemvg-itmlv 999320 319416 627476 34% /opt/IBM/ITM
/dev/mapper/systemvg-symlv 6061632 4597344 1149744 80% /opt/Symantec
/dev/mapper/systemvg-tmplv 5029504 14888 4752472 1% /tmp
/dev/mapper/systemvg-usrlv 5029504 1900084 2867276 40% /usr
/dev/mapper/systemvg-usrlcllv 12319920 3294076 8396828 29% /usr/local
/dev/mapper/systemvg-varlv 5029504 2974552 1792808 63% /var
/dev/mapper/systemvg-temlv 2514736 3840 2379824 1% /var/opt/BESClient

[larp]

Forgot to add the profile for the system.

[jdalrymple]

Did you try the Delete/Write/Verify process under

Configure --> Core Configuration Manager --> Tools --> Write Config Files?

That's where I'd start. It is definitely odd that no error snapshot is being created though.

[larp]

Hi

No I did the Configure --> Core Configuration Manager --> Apply Configuration.

[lmiltchev]

Open the offending service for editing under the CCM and verify if the service has a valid servicename, and if it is added to a host, hostgroup or servicegroup.

Run the "Write Config Tool" and show the output in case there are errors:

Configure --> Core Configuration Manager --> Tools --> Write Config Files --> Delete --> Write --> Verify

If you don't see any errors - Apply Configuration.

[larp]

Hi,

done Delete --> Write --> Verify and do not see any errors

but getting exactly the same error as before after pressing Apply Configuration...

the only difference I see is that before "delete" all file permissions were -rw-rw-r-- but after "write" it is set to -rw-r--r--

both, host_name and service_description parameters, are defined as well

[ssax]

Try running a tail command:

Code: Select all

tail -f /usr/local/nagiosxi/var/cmdsubsys.log

Then try to apply configuartion and post the full output of the tail command, that may give us more details.

[larp]

Hi,

outpus is bellow

Code: Select all

[user@w80431 var]$ tail -f /usr/local/nagiosxi/var/cmdsubsys.log
.............
PROCESSED 0 COMMANDS
PLYING NAGIOSCORE CONFIG...
CMDLINE=cd /usr/local/nagiosxi/scripts && ./reconfigure_nagios.sh
URL: http://localhost/nagiosxi/includes/components/ccm/
CMDLINE
--2015-08-11 09:05:20--  http://localhost/nagiosxi/includes/components/ccm/
Resolving localhost... ::1, 127.0.0.1
Connecting to localhost|::1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: `nagiosql.login'

     0K ..........                                              746K=0.01s

2015-08-11 09:05:20 (746 KB/s) - `nagiosql.login' saved [10379]

/usr/bin/wget --save-cookies nagiosql.cookies --keep-session-cookies http://localhost/nagiosxi/includes/components/ccm/ --no-check-certificate --post-data 'submit=Login&hidelog=true&loginSubmitted=true&username=nagiosxi&password=n@gweb' -O nagiosql.loginLOGIN SUCCESSFUL!
IMPORTING CONFIG FILES...URL: http://localhost/nagiosxi/includes/components/ccm/
Array
(
)
RESETTING PERMS
SETUID ROOT OK
URL: http://localhost/nagiosxi/includes/components/ccm/
CMDLINE
--2015-08-11 09:05:21--  http://localhost/nagiosxi/includes/components/ccm/
Resolving localhost... ::1, 127.0.0.1
Connecting to localhost|::1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: `nagiosql.login'

     0K ..........                                             1.02M=0.01s

2015-08-11 09:05:21 (1.02 MB/s) - `nagiosql.login' saved [10379]

/usr/bin/wget --save-cookies nagiosql.cookies --keep-session-cookies http://localhost/nagiosxi/includes/components/ccm/ --no-check-certificate --post-data 'submit=Login&hidelog=true&loginSubmitted=true&username=nagiosxi&password=n@gweb' -O nagiosql.loginLOGIN SUCCESSFUL!
URL: http://localhost/nagiosxi/includes/components/ccm/
CMDLINE:
/usr/bin/wget --load-cookies=nagiosql.cookies http://localhost/nagiosxi/includes/components/ccm/ --no-check-certificate --post-data 'cmd=apply&type=writeConfig' -O nagiosql.export.monitoring
--2015-08-11 09:05:21--  http://localhost/nagiosxi/includes/components/ccm/
Resolving localhost... ::1, 127.0.0.1
Connecting to localhost|::1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: `nagiosql.export.monitoring'

     0K .......... ..                                          31.3K=0.4s

2015-08-11 09:05:22 (31.3 KB/s) - `nagiosql.export.monitoring' saved [13233]

WRITE CONFIGS SUCCESSFUL!
OUTPUT:
Nagios Core 4.0.8
Copyright (c) 2009-present Nagios Core Development Team and Community Contributors
Copyright (c) 1999-2009 Ethan Galstad
Last Modified: 08-12-2014
License: GPL

Website: http://www.nagios.org
Reading configuration data...
   Read main config file okay...
   Read object config files okay...

Running pre-flight check on configuration data...

Checking objects...
Warning: Service 'Ping' on host 'w80432' has no default contacts or contactgroups defined!
        Checked 2031 services.
Warning: Host 'w80432' has no default contacts or contactgroups defined!
        Checked 236 hosts.
        Checked 20 host groups.
        Checked 1 service groups.
        Checked 39 contacts.
        Checked 5 contact groups.
        Checked 118 commands.
        Checked 45 time periods.
        Checked 0 host escalations.
        Checked 0 service escalations.
Checking for circular paths...
        Checked 236 hosts
        Checked 0 service dependencies
        Checked 0 host dependencies
        Checked 45 timeperiods
Checking global event handlers...
Checking obsessive compulsive processor commands...
Checking misc settings...

Total Warnings: 2
Total Errors:   0

Things look okay - No serious problems were detected during the pre-flight check
RET: 0
sudo: no tty present and no askpass program specified
OUTPUT=RET: 0
RETURNCODE=6
.....^C
[user@w80431 var]$

[jdalrymple]

Code: Select all

no tty present and no askpass program specified

That's not great. Did you change any of your sudoers files? I'm not sure how it relates to the error popping up, perhaps not at all. Should be able to track down what's going on in /var/log/secure though.

[larp]

Hi,

It was sudoers file and missing Nagios entries. After adding missing lines all works as expected

Thank for help in solving this issue!