I have installed NSClient 0.4.3 agent on server. Server I can ping and RDP still when I on-board it on Nagios, Get error "Socket timeout after 10 sec"
When I try to ping the server from tool, server shows non-pingable.
I have attached both the ping status from tool and from my desktop
NSclient++ Socket timeout after 10 Sec error
NSclient++ Socket timeout after 10 Sec error
You do not have the required permissions to view the files attached to this post.
Re: NSclient++ Socket timeout after 10 Sec error
To clarify a bit here... which server are you unable to ping? The XI server, or the server with NSClient on it?jyoti22 wrote:I have installed NSClient 0.4.3 agent on server. Server I can ping and RDP still when I on-board it on Nagios, Get error "Socket timeout after 10 sec"
When I try to ping the server from tool, server shows non-pingable.
I have attached both the ping status from tool and from my desktop
Are you using one of our pre-built VMs, or was this an installation you did yourself?
Former Nagios Employee.
me.
me.
Re: NSclient++ Socket timeout after 10 Sec error
I am unable to ping server with NSClient agent. This Server is up but from XI, its not pinging and I get error "Socket timeout after 10 Sec". I did the installation myself.
Re: NSclient++ Socket timeout after 10 Sec error
Can you post your NSClient.ini (with passwords and any sensitive information obfuscated)?jyoti22 wrote:I am unable to ping server with NSClient agent. This Server is up but from XI, its not pinging and I get error "Socket timeout after 10 Sec". I did the installation myself.
You're able to ping the server from the Nagios XI box, just not the XI program running on it?
Former Nagios Employee.
me.
me.
Re: NSclient++ Socket timeout after 10 Sec error
Please find attached config file
I am not able to ping serevr from Nagios box. However server is up and running.
Code: Select all
# If you want to fill this file with all avalible options run the following command:
# nscp settings --generate --add-defaults --load-all
# If you want to activate a module and bring in all its options use:
# nscp settings --activate-module <MODULE NAME> --add-defaults
# For details run: nscp settings --help
; Undocumented section
[/settings/default]
; ALLOWED HOSTS - A comaseparated list of allowed hosts. You can use netmasks (/ syntax) or * to create ranges.
allowed hosts = x.x.x.x
; Undocumented section
[/modules]
; CheckSystem - Various system related checks, such as CPU load, process state, service state memory usage and PDH counters.
CheckSystem = 1
; NSClientServer - A server that listens for incoming check_nt connection and processes incoming requests.
NSClientServer = 1
; CheckExternalScripts - Execute external scripts
CheckExternalScripts = 1
; CheckHelpers - Various helper function to extend other checks.
CheckHelpers = 1
; CheckEventLog - Check for errors and warnings in the event log.
CheckEventLog = 1
; CheckDisk - CheckDisk can check various file and disk related things.
CheckDisk = 1
; CheckNSCP - Use this module to check the healt and status of NSClient++ it self
CheckNSCP = 1
; A list of templates for wrapped scripts.
%SCRIPT% will be replaced by the actual script an %ARGS% will be replaced by any given arguments.
[/settings/external scripts/wrappings]
; POWERSHELL WRAPPING -
ps1 = cmd /c echo scripts\\%SCRIPT% %ARGS%; exit($lastexitcode) | powershell.exe -command -
; BATCH FILE WRAPPING -
bat = scripts\\%SCRIPT% %ARGS%
; VISUAL BASIC WRAPPING -
vbs = cscript.exe //T:30 //NoLogo scripts\\lib\\wrapper.vbs %SCRIPT% %ARGS%
; A list of aliases available.
An alias is an internal command that has been predefined to provide a single command without arguments. Be careful so you don't create loops (ie check_loop=check_a, check_a=check_loop)
[/settings/external scripts/alias]
; alias_volumes_loose - Alias for alias_volumes_loose. To configure this item add a section called: /settings/external scripts/alias/alias_volumes_loose
alias_volumes_loose = check_drivesize
; alias_volumes - Alias for alias_volumes. To configure this item add a section called: /settings/external scripts/alias/alias_volumes
alias_volumes = check_drivesize
; alias_up - Alias for alias_up. To configure this item add a section called: /settings/external scripts/alias/alias_up
alias_up = check_uptime
; alias_sched_all - Alias for alias_sched_all. To configure this item add a section called: /settings/external scripts/alias/alias_sched_all
alias_sched_all = check_tasksched show-all "syntax=${title}: ${exit_code}" "crit=exit_code ne 0"
; alias_service - Alias for alias_service. To configure this item add a section called: /settings/external scripts/alias/alias_service
alias_service = check_service
; alias_process_stopped - Alias for alias_process_stopped. To configure this item add a section called: /settings/external scripts/alias/alias_process_stopped
alias_process_stopped = check_process "process=$ARG1$" "crit=state != 'stopped'"
; alias_process_hung - Alias for alias_process_hung. To configure this item add a section called: /settings/external scripts/alias/alias_process_hung
alias_process_hung = check_process "filter=is_hung" "crit=count>0"
; alias_process_count - Alias for alias_process_count. To configure this item add a section called: /settings/external scripts/alias/alias_process_count
alias_process_count = check_process "process=$ARG1$" "warn=count > $ARG2$" "crit=count > $ARG3$"
; alias_process - Alias for alias_process. To configure this item add a section called: /settings/external scripts/alias/alias_process
alias_process = check_process "process=$ARG1$" "crit=state != 'started'"
; alias_mem - Alias for alias_mem. To configure this item add a section called: /settings/external scripts/alias/alias_mem
alias_mem = check_memory
; alias_file_size - Alias for alias_file_size. To configure this item add a section called: /settings/external scripts/alias/alias_file_size
alias_file_size = check_files "path=$ARG1$" "crit=size > $ARG2$" "top-syntax=${list}" "detail-syntax=${filename] ${size}" max-dir-depth=10
; alias_service_ex - Alias for alias_service_ex. To configure this item add a section called: /settings/external scripts/alias/alias_service_ex
alias_service_ex = check_service "exclude=Net Driver HPZ12" "exclude=Pml Driver HPZ12" exclude=stisvc
; alias_event_log - Alias for alias_event_log. To configure this item add a section called: /settings/external scripts/alias/alias_event_log
alias_event_log = check_eventlog
; alias_disk - Alias for alias_disk. To configure this item add a section called: /settings/external scripts/alias/alias_disk
alias_disk = check_drivesize
; alias_cpu_ex - Alias for alias_cpu_ex. To configure this item add a section called: /settings/external scripts/alias/alias_cpu_ex
alias_cpu_ex = check_cpu "warn=load > $ARG1$" "crit=load > $ARG2$" time=5m time=1m time=30s
; alias_file_age - Alias for alias_file_age. To configure this item add a section called: /settings/external scripts/alias/alias_file_age
alias_file_age = check_files "path=$ARG1$" "crit=written > $ARG2$" "top-syntax=${list}" "detail-syntax=${filename] ${written}" max-dir-depth=10
; alias_cpu - Alias for alias_cpu. To configure this item add a section called: /settings/external scripts/alias/alias_cpu
alias_cpu = check_cpu
; alias_sched_task - Alias for alias_sched_task. To configure this item add a section called: /settings/external scripts/alias/alias_sched_task
alias_sched_task = check_tasksched show-all "filter=title eq '$ARG1$'" "detail-syntax=${title} (${exit_code})" "crit=exit_code ne 0"
; alias_sched_long - Alias for alias_sched_long. To configure this item add a section called: /settings/external scripts/alias/alias_sched_long
alias_sched_long = check_tasksched "filter=status = 'running'" "detail-syntax=${title} (${most_recent_run_time})" "crit=most_recent_run_time < -$ARG1$"
; alias_disk_loose - Alias for alias_disk_loose. To configure this item add a section called: /settings/external scripts/alias/alias_disk_loose
alias_disk_loose = check_drivesize
Re: NSclient++ Socket timeout after 10 Sec error
What version of XI are you running? You can find this in the lower lefthand corner of your XI screen.jyoti22 wrote:Please find attached config fileI am not able to ping serevr from Nagios box. However server is up and running.Code: Select all
# If you want to fill this file with all avalible options run the following command: # nscp settings --generate --add-defaults --load-all # If you want to activate a module and bring in all its options use: # nscp settings --activate-module <MODULE NAME> --add-defaults # For details run: nscp settings --help ; Undocumented section [/settings/default] ; ALLOWED HOSTS - A comaseparated list of allowed hosts. You can use netmasks (/ syntax) or * to create ranges. allowed hosts = x.x.x.x ; Undocumented section [/modules] ; CheckSystem - Various system related checks, such as CPU load, process state, service state memory usage and PDH counters. CheckSystem = 1 ; NSClientServer - A server that listens for incoming check_nt connection and processes incoming requests. NSClientServer = 1 ; CheckExternalScripts - Execute external scripts CheckExternalScripts = 1 ; CheckHelpers - Various helper function to extend other checks. CheckHelpers = 1 ; CheckEventLog - Check for errors and warnings in the event log. CheckEventLog = 1 ; CheckDisk - CheckDisk can check various file and disk related things. CheckDisk = 1 ; CheckNSCP - Use this module to check the healt and status of NSClient++ it self CheckNSCP = 1 ; A list of templates for wrapped scripts. %SCRIPT% will be replaced by the actual script an %ARGS% will be replaced by any given arguments. [/settings/external scripts/wrappings] ; POWERSHELL WRAPPING - ps1 = cmd /c echo scripts\\%SCRIPT% %ARGS%; exit($lastexitcode) | powershell.exe -command - ; BATCH FILE WRAPPING - bat = scripts\\%SCRIPT% %ARGS% ; VISUAL BASIC WRAPPING - vbs = cscript.exe //T:30 //NoLogo scripts\\lib\\wrapper.vbs %SCRIPT% %ARGS% ; A list of aliases available. An alias is an internal command that has been predefined to provide a single command without arguments. Be careful so you don't create loops (ie check_loop=check_a, check_a=check_loop) [/settings/external scripts/alias] ; alias_volumes_loose - Alias for alias_volumes_loose. To configure this item add a section called: /settings/external scripts/alias/alias_volumes_loose alias_volumes_loose = check_drivesize ; alias_volumes - Alias for alias_volumes. To configure this item add a section called: /settings/external scripts/alias/alias_volumes alias_volumes = check_drivesize ; alias_up - Alias for alias_up. To configure this item add a section called: /settings/external scripts/alias/alias_up alias_up = check_uptime ; alias_sched_all - Alias for alias_sched_all. To configure this item add a section called: /settings/external scripts/alias/alias_sched_all alias_sched_all = check_tasksched show-all "syntax=${title}: ${exit_code}" "crit=exit_code ne 0" ; alias_service - Alias for alias_service. To configure this item add a section called: /settings/external scripts/alias/alias_service alias_service = check_service ; alias_process_stopped - Alias for alias_process_stopped. To configure this item add a section called: /settings/external scripts/alias/alias_process_stopped alias_process_stopped = check_process "process=$ARG1$" "crit=state != 'stopped'" ; alias_process_hung - Alias for alias_process_hung. To configure this item add a section called: /settings/external scripts/alias/alias_process_hung alias_process_hung = check_process "filter=is_hung" "crit=count>0" ; alias_process_count - Alias for alias_process_count. To configure this item add a section called: /settings/external scripts/alias/alias_process_count alias_process_count = check_process "process=$ARG1$" "warn=count > $ARG2$" "crit=count > $ARG3$" ; alias_process - Alias for alias_process. To configure this item add a section called: /settings/external scripts/alias/alias_process alias_process = check_process "process=$ARG1$" "crit=state != 'started'" ; alias_mem - Alias for alias_mem. To configure this item add a section called: /settings/external scripts/alias/alias_mem alias_mem = check_memory ; alias_file_size - Alias for alias_file_size. To configure this item add a section called: /settings/external scripts/alias/alias_file_size alias_file_size = check_files "path=$ARG1$" "crit=size > $ARG2$" "top-syntax=${list}" "detail-syntax=${filename] ${size}" max-dir-depth=10 ; alias_service_ex - Alias for alias_service_ex. To configure this item add a section called: /settings/external scripts/alias/alias_service_ex alias_service_ex = check_service "exclude=Net Driver HPZ12" "exclude=Pml Driver HPZ12" exclude=stisvc ; alias_event_log - Alias for alias_event_log. To configure this item add a section called: /settings/external scripts/alias/alias_event_log alias_event_log = check_eventlog ; alias_disk - Alias for alias_disk. To configure this item add a section called: /settings/external scripts/alias/alias_disk alias_disk = check_drivesize ; alias_cpu_ex - Alias for alias_cpu_ex. To configure this item add a section called: /settings/external scripts/alias/alias_cpu_ex alias_cpu_ex = check_cpu "warn=load > $ARG1$" "crit=load > $ARG2$" time=5m time=1m time=30s ; alias_file_age - Alias for alias_file_age. To configure this item add a section called: /settings/external scripts/alias/alias_file_age alias_file_age = check_files "path=$ARG1$" "crit=written > $ARG2$" "top-syntax=${list}" "detail-syntax=${filename] ${written}" max-dir-depth=10 ; alias_cpu - Alias for alias_cpu. To configure this item add a section called: /settings/external scripts/alias/alias_cpu alias_cpu = check_cpu ; alias_sched_task - Alias for alias_sched_task. To configure this item add a section called: /settings/external scripts/alias/alias_sched_task alias_sched_task = check_tasksched show-all "filter=title eq '$ARG1$'" "detail-syntax=${title} (${exit_code})" "crit=exit_code ne 0" ; alias_sched_long - Alias for alias_sched_long. To configure this item add a section called: /settings/external scripts/alias/alias_sched_long alias_sched_long = check_tasksched "filter=status = 'running'" "detail-syntax=${title} (${most_recent_run_time})" "crit=most_recent_run_time < -$ARG1$" ; alias_disk_loose - Alias for alias_disk_loose. To configure this item add a section called: /settings/external scripts/alias/alias_disk_loose alias_disk_loose = check_drivesize
What OS is your XI installation running on top of?
Code: Select all
cat /etc/*release*Former Nagios Employee.
me.
me.
Re: NSclient++ Socket timeout after 10 Sec error
I am using OS version "RHEL Server release 6.7"
and Nagios XI version is "Nagios XI 2014R2.7"
and Nagios XI version is "Nagios XI 2014R2.7"
Re: NSclient++ Socket timeout after 10 Sec error
Can you issue ajyoti22 wrote:I am using OS version "RHEL Server release 6.7"
and Nagios XI version is "Nagios XI 2014R2.7"
Code: Select all
service iptables statusFormer Nagios Employee.
me.
me.
Re: NSclient++ Socket timeout after 10 Sec error
I have confirmed, There is no firewall issue
Code: Select all
[root@xxxxx~]# service iptables status
Table: filter
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443
2 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED, ESTABLISHED
3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0
4 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
5 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22
6 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80
7 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:443
8 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with ic mp-host-prohibited
Chain FORWARD (policy ACCEPT)
num target prot opt source destination
1 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with ic mp-host-prohibited
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
[root@xxxx ~]#
Re: NSclient++ Socket timeout after 10 Sec error
Can you login to the Nagios XI server as root in a shell and ping the remote server?
Can you post the settings for the ping check that you are having issues with?
Can you post the settings for the ping check that you are having issues with?
Be sure to check out our Knowledgebase for helpful articles and solutions!