check_nrpe

Support forum for Nagios Core, Nagios Plugins, NCPA, NRPE, NSCA, NDOUtils and more. Engage with the community of users including those using the open source solutions.
Locked
rkennedy
Posts: 6579
Joined: Mon Oct 05, 2015 11:45 am

Re: check_nrpe

Post by rkennedy »

Can you run the following command and post the output?

Code: Select all

grep nrpe /usr/local/nagios/etc/commands.cfg
Former Nagios Employee
Top
nebblkshts
Posts: 58
Joined: Tue Dec 08, 2015 7:35 am

Re: check_nrpe

Post by nebblkshts »

I get nothing back
Top
rkennedy
Posts: 6579
Joined: Mon Oct 05, 2015 11:45 am

Re: check_nrpe

Post by rkennedy »

I know you mentioned you're doing a new install - is there a reason you've chosen an older version of ubuntu AND nagios? I noticed in the screen shot you're on 3.x.

Our newest version is 4.1.1

This should work to fix it though, you will need to modify /usr/local/nagios/etc/commands.cfg and add this to the end -

Code: Select all

define command {
       command_name                             check_nrpe
       command_line                             $USER1$/check_nrpe -H $HOSTADDRESS$ -t 30 -c $ARG1$ $ARG2$
}
Just to clarify as well - you posted this in the Nagios XI forum. Are you actually using Nagios Core?
Former Nagios Employee
Top
nebblkshts
Posts: 58
Joined: Tue Dec 08, 2015 7:35 am

Re: check_nrpe

Post by nebblkshts »

Sorry I was not sure which product we were using. I am not in a new install did not mean to confuse you. I took over for someone and I do not have as much Linux (Ubuntu) experience as the previous person. So this is all running on old OS and tools. They also did not put things in the same places you have asked me to look at so this has been fun in that I am getting experience but frustrating in that I need to clean this up to have standard setups so if I get hit by a bus the next will have an easier time. Thanks for the help!
Top
User avatar
hsmith
Agent Smith
Posts: 3539
Joined: Thu Jul 30, 2015 11:09 am
Location: 127.0.0.1
Contact:
Contact hsmith

Re: check_nrpe

Post by hsmith »

Try this command: find / -name commands.cfg -exec cat {} \;

Please post the full output of that command, if there are password or something you don't want us to see in there, please edit them out before posting.

Thanks!
Former Nagios Employee.
me.
Top
nebblkshts
Posts: 58
Joined: Tue Dec 08, 2015 7:35 am

Re: check_nrpe

Post by nebblkshts »

Here is the output...

Code: Select all

User....:/$ sudo find / -name commands.cfg -exec cat {} \;
###############################################################################
# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS
###############################################################################


################################################################################
# NOTIFICATION COMMANDS
################################################################################


#notify-host-by-email' command definition
define command{
        command_name    notify-host-by-email
        command_line    /usr/bin/printf "%b" "Notification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mailx -s "$NOTIFICATIONTYPE$ Host $HOSTNAME$ is $HOSTSTATE$" $CONTACTEMAIL$ -- -f [email protected]
        }

# 'notify-service-by-email' command definition
define command{
        command_name    notify-service-by-email
        command_line    /usr/bin/printf "%b" "Notification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$" | /usr/bin/mailx -s "$NOTIFICATIONTYPE$ Service: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$" $CONTACTEMAIL$ -- -f [email protected]
        }


#notify-host-by-cellphone' command definition
define command{
        command_name    notify-host-by-cell
        command_line    /usr/bin/printf "%b" "Host $HOSTNAME$ is $HOSTSTATE$\nInfo: $HOSTOUTPUT$" | /usr/bin/mailx -s Host $HOSTNAME$ is $HOSTSTATE$" $CONTACTEMAIL$
        }

# 'notify-service-by-cellphone' command definition
define command{
        command_name    notify-service-by-cell
        command_line    /usr/bin/printf "%b" "Service: $SERVICEDESC$ on Host $HOSTALIAS$ is $SERVICESTATE$\nAdditional Info:\n\n$SERVICEOUTPUT$" | /usr/bin/mailx -s "Service $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$" $CONTACTEMAIL$
        }

################################################################################
# HOST CHECK COMMANDS
################################################################################

# On Debian, check-host-alive is being defined from within the
# nagios-plugins-basic package

################################################################################
# PERFORMANCE DATA COMMANDS
################################################################################


# 'process-host-perfdata' command definition
define command{
        command_name    process-host-perfdata
        command_line    /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /var/lib/nagios3/host-perfdata.out
        }


# 'process-service-perfdata' command definition
define command{
        command_name    process-service-perfdata
        command_line    /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /var/lib/nagios3/service-perfdata.out
        }

#The Following has been imported from the old Nagios Install:


#NRPE Definition
#define command{
#        command_name check_nrpe
#        command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$ -t 20
#        }

# 'check_ups' command definition
define command{
        command_name    check_ups
        command_line    $USER1$/check_ups -H $HOSTADDRESS$ -u $ARG1$
        }

# 'check_local_disk' command definition
define command{
        command_name    check_local_disk
        command_line    $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
        }

# 'check_local_load' command definition
define command{
        command_name    check_local_load
        command_line    $USER1$/check_load -w $ARG1$ -c $ARG2$
        }

# 'check_local_procs' command definition
define command{
        command_name    check_local_procs
        command_line    $USER1$/check_procs -w $ARG1$ -c $ARG2$ -C $ARG3$
        }

# 'check_local_users' command definition
define command{
        command_name    check_local_users
        command_line    $USER1$/check_users -w $ARG1$ -c $ARG2$
        }

# 'check_local_swap' command definition
define command{
        command_name    check_local_swap
        command_line    $USER1$/check_swap -w $ARG1$ -c $ARG2$
        }

# 'check_local_mrtgtraf' command definition
define command{
        command_name    check_local_mrtgtraf
        command_line    $USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$
        }

# 'check_ftp' command definition
#define command{
#        command_name    check_ftp
#        command_line    $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$
#        }

# 'check_hpjd' command definition
#define command{
#        command_name    check_hpjd
#        command_line    $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$
#        }

# 'check_snmp' command definition
define command{
        command_name    check_snmp
        command_line    $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$
        }

# 'check_http' command definition
#define command{
#        command_name    check_http
#        command_line    $USER1$/check_http -I $HOSTADDRESS$ $ARG1$
#        }

# 'check_ssh' command definition
#define command{
#        command_name    check_ssh
#        command_line    $USER1$/check_ssh $ARG1$ $HOSTADDRESS$
#        }

# 'check_dhcp' command definition
#define command{
#        command_name    check_dhcp
#        command_line    $USER1$/check_dhcp $ARG1$
#        }

# 'check_ping' command definition
#define command{
#        command_name    check_ping
#        command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5
#        }

# 'check_pop' command definition
#define command{
#        command_name    check_pop
#        command_line    $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$
#        }

# 'check_imap' command definition
#define command{
#        command_name    check_imap
#        command_line    $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$
#        }

# 'check_smtp' command definition
#define command{
#        command_name    check_smtp
#        command_line    $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$
#        }

# 'check_tcp' command definition
#define command{
#        command_name    check_tcp
#        command_line    $USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
#        }

# 'check_udp' command definition
#define command{
#        command_name    check_udp
#        command_line    $USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
#        }

# 'check_nt' command definition
#define command{
#        command_name    check_nt
#        command_line    $USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
#        }

## Check if the JABBER service is alive (default port=5222)
# 'check_jabber' command definition

define command {
     command_name    check_jabber
     command_line    $USER1$/check_jabber -H $HOSTADDRESS$ -p 5222 -e 'xmlns="jabber:client" from="gd.com"'

}


define command{
 command_name check_snmp_printer
 command_line $USER1$/check_snmp_printer -H $HOSTADDRESS$ -C $ARG1$ -x $ARG2$ -w $ARG3$ -c $ARG4$
 }
###############################################################################
# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS
###############################################################################


################################################################################
# NOTIFICATION COMMANDS
################################################################################


# 'notify-host-by-email' command definition
define command{
        command_name    notify-host-by-email
        command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$ -- -f [email protected]
        }

# 'notify-service-by-email' command definition
define command{
        command_name    notify-service-by-email
        command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$ -- -f [email protected]
        }





################################################################################
# HOST CHECK COMMANDS
################################################################################

# On Debian, check-host-alive is being defined from within the
# nagios-plugins-basic package

################################################################################
# PERFORMANCE DATA COMMANDS
################################################################################


# 'process-host-perfdata' command definition
define command{
        command_name    process-host-perfdata
        command_line    /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /var/lib/nagios3/host-perfdata.out
        }


# 'process-service-perfdata' command definition
define command{
        command_name    process-service-perfdata
        command_line    /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /var/lib/nagios3/service-perfdata.out
        }
# added to fix errors
define command {
       command_name                             check_nrpe
       command_line                             $USER1$/check_nrpe -H $HOSTADDRESS$ -t 30 -c $ARG1$ $ARG2$
}
###############################################################################
# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS 3.2.3
#
# Last Modified: 05-31-2007
#
###############################################################################


################################################################################
#
# NOTIFICATION COMMANDS
#
################################################################################


# 'notify-host-by-email' command definition
define command{
        command_name    notify-host-by-email
        command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$
        }

# 'notify-service-by-email' command definition
define command{
        command_name    notify-service-by-email
        command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
        }





################################################################################
#
# HOST CHECK COMMANDS
#
################################################################################

# On Debian, check-host-alive is being defined from within the
# nagios-plugins-basic package

################################################################################
#
# PERFORMANCE DATA COMMANDS
#
################################################################################


# 'process-host-perfdata' command definition
define command{
        command_name    process-host-perfdata
        command_line    /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /var/lib/nagios3/host-perfdata.out
        }


# 'process-service-perfdata' command definition
define command{
        command_name    process-service-perfdata
        command_line    /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /var/lib/nagios3/service-perfdata.out
        }


###############################################################################
# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS 3.2.3
#
# Last Modified: 05-31-2007
#
###############################################################################


################################################################################
#
# NOTIFICATION COMMANDS
#
################################################################################


# 'notify-host-by-email' command definition
define command{
        command_name    notify-host-by-email
        command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$
        }

# 'notify-service-by-email' command definition
define command{
        command_name    notify-service-by-email
        command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
        }





################################################################################
#
# HOST CHECK COMMANDS
#
################################################################################

# On Debian, check-host-alive is being defined from within the
# nagios-plugins-basic package

################################################################################
#
# PERFORMANCE DATA COMMANDS
#
################################################################################


# 'process-host-perfdata' command definition
define command{
        command_name    process-host-perfdata
        command_line    /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /var/lib/nagios3/host-perfdata.out
        }


# 'process-service-perfdata' command definition
define command{
        command_name    process-service-perfdata
        command_line    /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /var/lib/nagios3/service-perfdata.out
        }
Last edited by tmcdonald on Wed Dec 09, 2015 10:43 am, edited 1 time in total.
Reason: Please use [code][/code] tags around long output
Top
rkennedy
Posts: 6579
Joined: Mon Oct 05, 2015 11:45 am

Re: check_nrpe

Post by rkennedy »

Are you still receiving the same error?
Former Nagios Employee
Top
nebblkshts
Posts: 58
Joined: Tue Dec 08, 2015 7:35 am

Re: check_nrpe

Post by nebblkshts »

Yes, I tried putting in the code you posted to the second command.cfg file and I could not restart Nagios if kept error out on that config file.

Code: Select all

define command {
       command_name                             check_nrpe
       command_line                             $USER1$/check_nrpe -H $HOSTADDRESS$ -t 30 -c $ARG1$ $ARG2$
Top
rkennedy
Posts: 6579
Joined: Mon Oct 05, 2015 11:45 am

Re: check_nrpe

Post by rkennedy »

What is the result if you run the command over the CLI?

Code: Select all

/usr/local/nagios/libexec/check_nrpe -H LYNCFE2 -c CheckMem -a MaxWarn=80% MaxCrit=90% ShowAll type=physical
(you may need to change LYNCFE2 to the IP)
Former Nagios Employee
Top
nebblkshts
Posts: 58
Joined: Tue Dec 08, 2015 7:35 am

Re: check_nrpe

Post by nebblkshts »

/usr/local/nagios/libexec/check_nrpe: command not found
Top
Locked

Return to “Open Source Nagios Projects”