snmp trap configuration for specific OIDs on remote device

[joulsn]

Thanks @rhassing!

OP let us know if this works.

Thank you. Unfortunately I was very busy this time. I will have a try next week.
BR

[rkennedy]

Sounds good - I'll leave this thread open for now. Let us know if you need further assistance!

[joulsn]

Sounds good - I'll leave this thread open for now. Let us know if you need further assistance!

good morning
i had the chance to do the steps you suggested and thats the output:

[root@NagiosServer ~]# tail -f /var/log/messages
Mar 14 09:08:59 NagiosServer snmptrapd[1625]: 2016-03-14 09:08:59 <UNKNOWN> [UDP: [10.10.10.74]:10020->[10.10.10.50]]:#012.1.3.6.1.2.1.1.3.0 = Timeticks: (154205850) 17 days, 20:20:58.50#011.1.3.6.1.6.3.1.1.4.1.0 = OID: .1.3.6.1.4.1.33687.1.2.0.1#011.1.3.6.1.4.1.33687.1.1.3.1.0 = STRING: "MotionDetection"#011.1.3.6.1.4.1.33687.1.1.3.2.0 = INTEGER: 651225#011.1.3.6.1.4.1.33687.1.1.3.3.0 = INTEGER: 1457942591#011.1.3.6.1.4.1.33687.1.1.3.4.0 = INTEGER: 3#011.1.3.6.1.4.1.33687.1.1.3.5.0 = STRING: "CANON VB S30D"#011.1.3.6.1.4.1.33687.1.1.3.6.0 = INTEGER: 0#011.1.3.6.1.4.1.33687.1.1.3.7.0 = ""#011.1.3.6.1.4.1.33687.1.1.3.9.0 = STRING: "Motion event smd on camera CANON VB S30D [obelix] ()."

Mar 14 09:09:02 NagiosServer snmptrapd[1625]: 2016-03-14 09:09:02 <UNKNOWN> [UDP: [10.10.10.74]:10020->[10.10.10.50]]:#012.1.3.6.1.2.1.1.3.0 = Timeticks: (154206148) 17 days, 20:21:01.48#011.1.3.6.1.6.3.1.1.4.1.0 = OID: .1.3.6.1.4.1.33687.1.2.0.1#011.1.3.6.1.4.1.33687.1.1.3.1.0 = STRING: "MotionDetection"#011.1.3.6.1.4.1.33687.1.1.3.2.0 = INTEGER: 651229#011.1.3.6.1.4.1.33687.1.1.3.3.0 = INTEGER: 1457942594#011.1.3.6.1.4.1.33687.1.1.3.4.0 = INTEGER: 3#011.1.3.6.1.4.1.33687.1.1.3.5.0 = STRING: "CANON VB S30D"#011.1.3.6.1.4.1.33687.1.1.3.6.0 = INTEGER: 0#011.1.3.6.1.4.1.33687.1.1.3.7.0 = ""#011.1.3.6.1.4.1.33687.1.1.3.9.0 = STRING: "Motion event smd on camera CANON VB S30D [obelix] ()."

Mar 14 09:09:05 NagiosServer snmptrapd[1625]: 2016-03-14 09:09:05 <UNKNOWN> [UDP: [10.10.10.74]:10020->[10.10.10.50]]:#012.1.3.6.1.2.1.1.3.0 = Timeticks: (154206425) 17 days, 20:21:04.25#011.1.3.6.1.6.3.1.1.4.1.0 = OID: .1.3.6.1.4.1.33687.1.2.0.1#011.1.3.6.1.4.1.33687.1.1.3.1.0 = STRING: "MotionDetection"#011.1.3.6.1.4.1.33687.1.1.3.2.0 = INTEGER: 651233#011.1.3.6.1.4.1.33687.1.1.3.3.0 = INTEGER: 1457942597#011.1.3.6.1.4.1.33687.1.1.3.4.0 = INTEGER: 2#011.1.3.6.1.4.1.33687.1.1.3.5.0 = STRING: "axis 212"#011.1.3.6.1.4.1.33687.1.1.3.6.0 = INTEGER: 0#011.1.3.6.1.4.1.33687.1.1.3.7.0 = ""#011.1.3.6.1.4.1.33687.1.1.3.9.0 = STRING: "Motion event smd on camera axis 212 [obelix] ()."

Mar 14 09:09:05 NagiosServer snmptrapd[1625]: 2016-03-14 09:09:05 <UNKNOWN> [UDP: [10.10.10.74]:10020->[10.10.10.50]]:#012.1.3.6.1.2.1.1.3.0 = Timeticks: (154206451) 17 days, 20:21:04.51#011.1.3.6.1.6.3.1.1.4.1.0 = OID: .1.3.6.1.4.1.33687.1.2.0.1#011.1.3.6.1.4.1.33687.1.1.3.1.0 = STRING: "MotionDetection"#011.1.3.6.1.4.1.33687.1.1.3.2.0 = INTEGER: 651237#011.1.3.6.1.4.1.33687.1.1.3.3.0 = INTEGER: 1457942597#011.1.3.6.1.4.1.33687.1.1.3.4.0 = INTEGER: 3#011.1.3.6.1.4.1.33687.1.1.3.5.0 = STRING: "CANON VB S30D"#011.1.3.6.1.4.1.33687.1.1.3.6.0 = INTEGER: 0#011.1.3.6.1.4.1.33687.1.1.3.7.0 = ""#011.1.3.6.1.4.1.33687.1.1.3.9.0 = STRING: "Motion event smd on camera CANON VB S30D [obelix] ()."


[root@NagiosServer snmptt]# nano snmpttsystem.log
Mon Mar 14 08:59:37 2016 SNMPTT v1.4 shutdown
Mon Mar 14 08:59:37 2016 Total traps received=0,Total traps translated=0,Total traps ignored=0,Total unknown traps=0
Mon Mar 14 09:00:52 2016 SNMPTT v1.4 started
Mon Mar 14 09:00:52 2016 Could not open debug output file!
Mon Mar 14 09:00:52 2016 Loading /etc/snmp/snmptt.conf
Mon Mar 14 09:00:52 2016 Finished loading 104 lines from /etc/snmp/snmptt.conf
Mon Mar 14 09:00:52 2016 Could not convert user id 'snmptt' to a numeric UID

Mon Mar 14 09:02:08 2016 SNMPTT v1.4 started
Mon Mar 14 09:02:08 2016 Could not open debug output file!


BR guys

[rhassing]

Could you please check if the directory /var/log/snmptt/ exists?
And post the out put of:

Code: Select all

ls -ld /var/log/snmptt/

[joulsn]

Could you please check if the directory /var/log/snmptt/ exists?
And post the out put of:

Code: Select all

ls -ld /var/log/snmptt/

[root@NagiosServer ~]# ls -ld /var/log/snmptt/
drwxrwxr-x. 2 root root 4096 25. Feb 12:28 /var/log/snmptt/


/var/log/snmptt exists
it contains snmpttsystem.log
Fri Feb 26 16:17:41 2016 SNMPTT v1.4 shutdown
Fri Feb 26 16:17:41 2016 Total traps received=0,Total traps translated=0,Total traps ignored=0,Total unknown traps=0
Fri Feb 26 16:17:43 2016 SNMPTT v1.4 started
Fri Feb 26 16:17:43 2016 Loading /etc/snmp/snmptt.conf
Fri Feb 26 16:17:43 2016 Finished loading 104 lines from /etc/snmp/snmptt.conf
Fri Feb 26 16:17:43 2016 Could not convert user id 'snmptt' to a numeric UID

Mon Mar 14 08:54:06 2016 SNMPTT v1.4 shutdown
Mon Mar 14 08:54:06 2016 Total traps received=0,Total traps translated=0,Total traps ignored=0,Total unknown traps=0
Mon Mar 14 08:54:09 2016 SNMPTT v1.4 started
Mon Mar 14 08:54:09 2016 Could not open debug output file!
Mon Mar 14 08:54:09 2016 Loading /etc/snmp/snmptt.conf
Mon Mar 14 08:54:09 2016 Finished loading 104 lines from /etc/snmp/snmptt.conf
Mon Mar 14 08:54:09 2016 Could not convert user id 'snmptt' to a numeric UID

Mon Mar 14 08:57:19 2016 SNMPTT v1.4 shutdown
Mon Mar 14 08:57:19 2016 Total traps received=0,Total traps translated=0,Total traps ignored=0,Total unknown traps=0
Mon Mar 14 08:57:22 2016 SNMPTT v1.4 started

[rhassing]

You should either do:

Code: Select all

chmod 777 /var/log/snmptt/ 

Or you should make the process that runs snmptt (that's either snmptt or the process that runs snmptrapd) be the owner or change the group of this directory.
The error you get that the debug file could not be written does mean there is a permission error.

it looks good, so we should have you up and running in no time

[rkennedy]

Thanks @rhassing!

@joulsn - let us know the result after changing the permissions.