nagios monitoring engine won't start

[vmwareguy]

Fresh install of Nagios XI on a base centos 6.7 install and the nagios monitoring engine won't start.

I did a write config and verify config - this is what it reports.

Any help would be great - thanks.

Code: Select all

Error: There are no services defined!
Error: There are no hosts defined!
Error: Service notification command 'xi_service_notification_handler' specified for contact 'xi_default_contact' is not defined anywhere!
Error: Host notification command 'xi_host_notification_handler' specified for contact 'xi_default_contact' is not defined anywhere!
Error: Global host event handler command 'xi_host_event_handler' is not defined anywhere!
Error: Global service event handler command 'xi_service_event_handler' is not defined anywhere!

Nagios Core 4.1.1
Copyright (c) 2009-present Nagios Core Development Team and Community Contributors
Copyright (c) 1999-2009 Ethan Galstad
Last Modified: 08-19-2015
License: GPL

Website: https://www.nagios.org
Reading configuration data...
Read main config file okay...
Read object config files okay...

Running pre-flight check on configuration data...

Checking objects...
Error: There are no services defined!
Checked 0 services.
Error: There are no hosts defined!
Checked 0 hosts.
Checked 0 host groups.
Checked 0 service groups.
Error: Service notification command 'xi_service_notification_handler' specified for contact 'xi_default_contact' is not defined anywhere!
Error: Host notification command 'xi_host_notification_handler' specified for contact 'xi_default_contact' is not defined anywhere!
Checked 1 contacts.
Checked 0 contact groups.
Checked 0 commands.
Checked 1 time periods.
Checked 0 host escalations.
Checked 0 service escalations.
Checking for circular paths...
Checked 0 hosts
Checked 0 service dependencies
Checked 0 host dependencies
Checked 1 timeperiods
Checking global event handlers...
Error: Global host event handler command 'xi_host_event_handler' is not defined anywhere!
Error: Global service event handler command 'xi_service_event_handler' is not defined anywhere!
Checking obsessive compulsive processor commands...
Checking misc settings...

Total Warnings: 0
Total Errors: 6

***> One or more problems was encountered while running the pre-flight check...

Check your configuration file(s) to ensure that they contain valid
directives and data defintions. If you are upgrading from a previous
version of Nagios, you should be aware that some variables/definitions
may have been removed or modified in this version. Make sure to read
the HTML documentation regarding the config files, as well as the
'Whats New' section to find out what has changed.

[hsmith]

What steps did you go through for the installation?

What's the output of this command? ( In code brackets, please )

Code: Select all

ls -lR /usr/local/nagi*

[vmwareguy]

there's 416526 characters when I run that command - to much to post.

Do you want me to break it out in a bunch of separate post?

[hsmith]

How about just the output of ls -lR /usr/local/nagios

What steps did you go through for the installation?

This is also important.

[vmwareguy]

How about just the output of ls -lR /usr/local/nagios

What steps did you go through for the installation?

This is also important.

Stand by - I'm doing a fresh install will report back.

[hsmith]

Roger.

[vmwareguy]

I finished doing a fresh install using the XI_Manual_Installation_Instructions and still had the same problem. Here is the output from ls -lR /usr/local/nagios

Code: Select all

/usr/local/nagios:
total 28
drwxrwxr-x.  2 nagios nagios 4096 May 19 15:03 bin
drwsrwsr-x.  7 nagios nagios 4096 May 20 07:14 etc
drwxr-xr-x.  2 root   root   4096 May 19 15:02 include
drwxrwsr-x.  2 nagios nagios 4096 May 19 15:07 libexec
drwxrwxr-x.  2 nagios nagios 4096 May 19 15:01 sbin
drwxrwxr-x. 18 nagios nagios 4096 May 19 15:04 share
drwxrwxr-x.  6 nagios nagios 4096 May 20 07:12 var

/usr/local/nagios/bin:
total 1580
-rwxr-xr-x. 1 root   root    40081 May 19 15:02 file2sock
-rwxr-xr-x. 1 root   root    41823 May 19 15:02 log2ndo
-rwxrwxr--. 1 nagios nagios 676712 May 19 15:01 nagios
-rwxrwxr--. 1 nagios nagios  36936 May 19 15:01 nagiostats
-rwxr-xr-x. 1 root   root   285650 May 19 15:02 ndo2db
-rwxr-xr-x. 1 root   root   175530 May 19 15:02 ndomod.o
-rwxr-xr--. 1 nagios nagios  26440 May 19 15:03 npcd
-rwxr-xr--. 1 nagios nagios  13064 May 19 15:03 npcdmod.o
-rwxrwxr-x. 1 nagios nagios 144956 May 19 15:03 nrpe
-rwxr-xr-x. 1 root   root   118565 May 19 15:03 nsca
-rwxr-xr-x. 1 root   root    36213 May 19 15:02 sockdebug

/usr/local/nagios/etc:
total 128
-rwxrwxr-x. 1 apache nagios  744 May 19 15:02 cgi.cfg
-rw-r--r--  1 apache nagios  813 May 20 07:14 commands.cfg
-rw-r--r--  1 apache nagios  813 May 20 07:14 contactgroups.cfg
-rw-r--r--  1 apache nagios  801 May 20 07:14 contacts.cfg
-rw-r--r--  1 apache nagios  817 May 20 07:14 contacttemplates.cfg
-rw-r--r--  1 apache nagios  817 May 20 07:14 hostdependencies.cfg
-rw-r--r--  1 apache nagios  819 May 20 07:14 hostescalations.cfg
-rw-r--r--  1 apache nagios  837 May 20 07:14 hostextinfo.cfg
-rw-r--r--  1 apache nagios  806 May 20 07:14 hostgroups.cfg
drwsrwsr-x. 2 apache nagios 4096 May 19 15:02 hosts
-rw-r--r--  1 apache nagios  813 May 20 07:14 hosttemplates.cfg
drwsrwsr-x. 2 apache nagios 4096 May 19 15:12 import
-rwxrwxr-x. 1 apache nagios 5670 May 19 15:02 nagios.cfg
-rw-r--r--. 1 apache nagios 2229 May 19 15:02 ndo2db.cfg
-rw-r--r--. 1 apache nagios 4827 May 19 15:02 ndomod.cfg
-rw-r--r--. 1 apache nagios 7988 May 19 15:03 nrpe.cfg
-rw-rw-r--. 1 apache nagios 5345 May 19 15:03 nsca.cfg
"/tmp/config.txt" 2165L, 123883C

[vmwareguy]

I also received the following error at the end of the install

Code: Select all

Running './E-importnagiosql'...
httpd: no process killed
Starting httpd:                                            [  OK  ]
Sleeping...
NOTE: If prompted, enter the MySQL root password
NagiosQL database appears OK - continuing...
NDOUtils database appears OK - continuing...
Found config files to import - continuing...
URL: http://localhost/nagiosxi/includes/components/ccm/
CMDLINE
/usr/bin/wget --save-cookies nagiosql.cookies --keep-session-cookies http://localhost/nagiosxi/includes/components/ccm/ --no-check-certificate --post-data 'submit=Login&hidelog=true&loginSubmitted=true&username=nagiosxi&password=n@gweb' -O nagiosql.login--2016-05-20 07:51:32--  http://localhost/nagiosxi/includes/components/ccm/
Resolving our proxy server
Connecting to our proxy server... connected.
Proxy request sent, awaiting response... 301 Moved Permanently
Location: http://our proxy server [following]
--2016-05-20 07:51:32--  http://our proxy server /
Connecting to "Our proxy server .. connected.
Proxy request sent, awaiting response... 403 Forbidden
2016-05-20 07:51:32 ERROR 403: Forbidden.

NAGIOSQL LOGIN FAILED!
RESULT=1

===================
INSTALLATION ERROR!
===================
Installation step failed - exiting.
Check for error messages in the install log (install.log).

If you require assistance in resolving the issue, please include install.log
in your communications with Nagios XI technical support.

The script that failed was: './E-importnagiosql'

[vmwareguy]

All good - I found the Problems_Using_Nagios_XI_With_Proxies write up. After adding the wgetrc exceptions I got a clean install. Thanks for the help