Windows 10 Explorer Serrvice

[mcapra]

Have you tried using a more recent version of NSClient++? Using 0.4.1.73, my problem was that the PROCSTATE command simply did not work against a Windows 10 machine. It would not be able to find the process in any situation. Upgrading my installation to 0.4.4.19 remedied the issues I was facing.

[kwhogster]

Thanks for that

Where can I download the nsclient from

was on the Nagios site cant seem to find it.

Thanks again

[Box293]

http://nsclient.org/download/

[kwhogster]

Got it will apply this later

Thanks

[kwhogster]

Bad news guys.

Installed NSCP-0.4.4.19-x64 on my Windows 10 Computer.

Now all but one service works

My NRPE service came back fine on Disk Checking

All other services 6 in total have this error CRITICAL - Socket timeout after 10 seconds

I had to modify the nsclient.ini to get the NRPE service to work

I ran this command

nscp settings --generate --add-defaults --load-all

This is my new ini file

Code: Select all

# If you want to fill this file with all avalible options run the following command:
#   nscp settings --generate --add-defaults --load-all
# If you want to activate a module and bring in all its options use:
#   nscp settings --activate-module <MODULE NAME> --add-defaults
# For details run: nscp settings --help


; Undocumented section
[/settings/default]

; Undocumented key
password = xxxxxxxxx

; CACHE ALLOWED HOSTS - If host names (DNS entries) should be cached, improves speed and security somewhat but won't allow you to have dynamic IPs for your Nagios server.
cache allowed hosts = 1

; ALLOWED HOSTS - A comaseparated list of allowed hosts. You can use netmasks (/ syntax) or * to create ranges.
allowed hosts = 10.2.8.79

; TIMEOUT - Timeout when reading packets on incoming sockets. If the data has not arrived within this time we will bail out.
timeout = 30

; INBOX - The default channel to post incoming messages on
inbox = inbox


; Undocumented section
[/settings/NRPE/server]

; Undocumented key
;ssl options = no-sslv2,no-sslv3
ssl options =

; Undocumented key
;verify mode = peer-cert

; Undocumented key
insecure = true

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
;use ssl = 1

; COMMAND ALLOW NASTY META CHARS - This option determines whether or not the we will allow clients to specify nasty (as in |`&><'"\[]{}) characters in arguments.
allow nasty characters = true

; COMMAND ARGUMENT PROCESSING - This option determines whether or not the we will allow clients to specify arguments to commands that are executed.
allow arguments = true

; PORT NUMBER - Port to use for NRPE.
port = 5666

; EXTENDED RESPONSE - Send more then 1 return packet to allow response to go beyond payload size (requires modified client if legacy is true this defaults to false).
extended response = 1


; Undocumented section
[/modules]

; Undocumented key
CheckExternalScripts = 1

; Undocumented key
CheckHelpers = 1

; Undocumented key
CheckNSCP = 1

; Undocumented key
CheckDisk = 1

; Undocumented key
CheckSystem = 1

; Undocumented key
CheckEventLog = 1

; Undocumented key
NSCAClient = 1

; Undocumented key
NRPEServer = enabled

; SimpleFileWriter - Write status updates to a text file (A bit like the NSCA server does)
SimpleFileWriter = 0

; PythonScript - Loads and processes internal Python scripts
PythonScript = 0

; NSClientServer - A server that listens for incoming check_nt connection and processes incoming requests.
NSClientServer = 0

; NRDPClient - NRDP client can be used both from command line and from queries to check remote systes via NRDP
NRDPClient = 0

; DotnetPlugin - Plugin to load and manage plugins written in dot net.
DotnetPlugins = 0

; CommandClient - A command line client, generally not used except with "nscp test".
CommandClient = 0

; CheckTaskSched - Check status of your scheduled jobs.
CheckTaskSched = 0

; NSCAServer - A server that listens for incoming NSCA connection and processes incoming requests.
NSCAServer = 0

; CheckLogFile - File for checking log files and various other forms of updating text files
CheckLogFile = 0

; SyslogClient - Forward information as syslog messages to a syslog server
SyslogClient = 0

; Scheduler - Use this to schedule check commands and jobs in conjunction with for instance passive monitoring through NSCA
Scheduler = 0

; NRPEClient - NRPE client can be used both from command line and from queries to check remote systes via NRPE as well as configure the NRPE server
NRPEClient = 0

; WEBServer - A server that listens for incoming HTTP connection and processes incoming requests. It provides both a WEB UI as well as a REST API in addition to simplifying configuration of WEB Server module.
WEBServer = 0

; GraphiteClient - Graphite client can be used to submit graph data to a graphite graphing system
GraphiteClient = 0

; SMTPClient - SMTP client can be used both from command line and from queries to check remote systes via SMTP
SMTPClient = 0

; CheckWMI - Check status via WMI
CheckWMI = 0

; SimpleCache - Stores status updates and allows for active checks to retrieve them
SimpleCache = 0


; A list of available remote target systems
[/settings/targets]


; Configure which services has to be in which state
[/settings/system/windows/service mapping]


; A set of options to configure the real time checks
[/settings/system/windows/real-time]


; Section for system checks and system settings
[/settings/system/windows]

; DEFAULT LENGTH - Used to define the default interval for range buffer checks (ie. CPU).
default buffer length = 1h


; Section for configuring the shared session.
[/settings/shared session]

; ENABLE THE SAHRED SESSION - This is currently not added in 0.4.x
enabled = false


; Section for the PythonScripts module.
[/settings/python]


; A set of options to configure the real time checks
[/settings/logfile/real-time]

; REAL TIME CHECKING - Spawns a background thread which waits for file changes.
enabled = 0


; Configure log file properties.
[/settings/log/file]

; MAXIMUM FILE SIZE - When file size reaches this it will be truncated to 50% if set to 0 (default) truncation will be disabled
max size = 0


; A list of scripts available to run from the PythonScript module.
[/settings/python/scripts]


; Section for configuring the log handling.
[/settings/log]

; LOG LEVEL - Log level to use. Available levels are error,warning,info,debug,trace
level = info

; FILENAME - The file to write log data to. Set this to none to disable log to file.
file name = ${exe-path}/nsclient.log

; DATEMASK - The size of the buffer to use when getting messages this affects the speed and maximum size of messages you can recieve.
date format = %Y-%m-%d %H:%M:%S


; Section for simple file writer module (SimpleFileWriter.dll).
[/settings/writers/file]

; MESSAGE SYNTAX - The syntax of the message to write to the line. Can be any arbitrary string as well as include any of the following special keywords:${command} = The command name, ${host} the host, ${channel} the recieving channel, ${alias} the alias for the command, ${alias-or-command} = alias if set otherweise command, ${message} = the message data (no escape), ${result} = The result status (number).
syntax = ${alias-or-command} ${result} ${message}

; FILE TO WRITE TO - The filename to write output to.
file = output.txt

; CHANNEL - The channel to listen to.
channel = FILE


; Section for graphite passive check module.
[/settings/graphite/client]

; CHANNEL - The channel to listen to.
channel = GRAPHITE

; HOSTNAME - The host name of this host if set to blank (default) the windows name of the computer will be used.
hostname = auto


; A list of wrapped scripts (ie. scruts using a template mechanism). The template used will be defined by the extension of the script.
[/settings/external scripts/wrapped scripts]


; Target definition for: default
[/settings/syslog/client/targets/default]

; TODO - 
warning severity = warning

; TODO - 
tag_syntax = NSCA

; TODO - 
severity = error

; TODO - 
ok severity = informational

; TODO - 
message_syntax = %message%

; TODO - 
facility = kernel

; TODO - 
critical severity = critical

; TODO - 
unknown severity = emergency


; Section for external scripts configuration options (CheckExternalScripts).
[/settings/external scripts]

; COMMAND TIMEOUT - The maximum time in seconds that a command can execute. (if more then this execution will be aborted). NOTICE this only affects external commands not internal ones.
timeout = 60

; COMMAND ALLOW NASTY META CHARS - This option determines whether or not the we will allow clients to specify nasty (as in |`&><'"\[]{}) characters in arguments.
allow nasty characters = 0

; COMMAND ARGUMENT PROCESSING - This option determines whether or not the we will allow clients to specify arguments to commands that are executed.
allow arguments = 0


; Section for SYSLOG passive check module.
[/settings/syslog/client]

; CHANNEL - The channel to listen to.
channel = syslog


; A set of options to configure the real time checks
[/settings/eventlog/real-time]

; STARTUP AGE - The initial age to scan when starting NSClient++
startup age = 30m

; REAL TIME CHECKING - Spawns a background thread which detects issues and reports them back instantly.
enabled = 0

; LOGS TO CHECK - Comma separated list of logs to check
log = application,system

; DEBUG - Log missed records (useful to detect issues with filters) not useful in production as it is a bit of a resource hog.
debug = 0


; Section for configuring the crash handler.
[/settings/crash]

; SUBMIT CRASHREPORTS - Submit crash reports to nsclient.org (or your configured submission server)
submit = false

; CRASH ARCHIVE LOCATION - The folder to archive crash dumps in
archive folder = ${shared-path}/crash-dumps

; ARCHIVE CRASHREPORTS - Archive crash reports in the archive folder
archive = true

; RESTART SERVICE NAME - The url to submit crash reports to
restart target = NSCP

; RESTART - Submit crash reports to nsclient.org (or your configured submission server)
restart = true

; SUBMISSION URL - The url to submit crash reports to
submit url = https://crash.nsclient.org/post


; Section for log file checker
[/settings/logfile]


; Section for SMTP passive check module.
[/settings/SMTP/client]

; CHANNEL - The channel to listen to.
channel = SMTP


; Section for NSCA (NSCAServer) (check_nsca) protocol options.
[/settings/NSCA/server]

; PORT NUMBER - Port to use for NSCA.
port = 5667

; PERFORMANCE DATA - Send performance data back to nagios (set this to false to remove all performance data).
performance data = 1

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
use ssl = 0

; ENCRYPTION - Name of encryption algorithm to use. Has to be the same as your agent i using or it wont work at all.This is also independent of SSL and generally used instead of SSL. Available encryption algorithms are: none = No Encryption (not safe) xor = XOR des = DES 3des = DES-EDE3 cast128 = CAST-128 xtea = XTEA blowfish = Blowfish twofish = Twofish rc2 = RC2 aes128 = AES aes192 = AES aes = AES serpent = Serpent gost = GOST
encryption = aes

; PAYLOAD LENGTH - Length of payload to/from the NSCA agent. This is a hard specific value so you have to "configure" (read recompile) your NSCA agent to use the same value for it to work.
payload length = 512


; Target definition for: default
[/settings/NSCA/client/targets/default]

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
use ssl = 0

; TIMEOUT - Timeout when reading/writing packets to/from sockets.
timeout = 30

; ENCRYPTION - Name of encryption algorithm to use. Has to be the same as your server i using or it wont work at all.This is also independent of SSL and generally used instead of SSL. Available encryption algorithms are: none = No Encryption (not safe) xor = XOR des = DES 3des = DES-EDE3 cast128 = CAST-128 xtea = XTEA blowfish = Blowfish twofish = Twofish rc2 = RC2 aes128 = AES aes192 = AES aes = AES serpent = Serpent gost = GOST
encryption = aes

; ALLOWED CIPHERS - A better value is: ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH
allowed ciphers = ADH

; VERIFY MODE - 
verify mode = none


; Section for NSClient (NSClientServer.dll) (check_nt) protocol options.
[/settings/NSClient/server]

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
use ssl = 0

; PERFORMANCE DATA - Send performance data back to Nagios (set this to 0 to remove all performance data).
performance data = 1

; PORT NUMBER - Port to use for check_nt.
port = 12489


; A set of filters to use in real-time mode
[/settings/system/windows/real-time/checks]


; Section for NSCA passive check module.
[/settings/NSCA/client]

; HOSTNAME - The host name of the monitored computer. Set this to auto (default) to use the windows name of the computer.  auto	Hostname ${host}	Hostname ${host_lc} Hostname in lowercase ${host_uc}	Hostname in uppercase ${domain}	Domainname ${domain_lc}	Domainname in lowercase ${domain_uc}	Domainname in uppercase 
hostname = auto

; CHANNEL - The channel to listen to.
channel = NSCA


; Target definition for: default
[/settings/NRDP/client/targets/default]

; SENDER - Sender of email message
sender = nscp@localhost

; RECIPIENT - Recipient of email message
recipient = nscp@localhost

; TIMEOUT - Timeout when reading/writing packets to/from sockets.
timeout = 30

; TEMPLATE - Template for message data
template = Hello, this is %source% reporting %message%!


; Section for SMTP passive check module.
[/settings/NRDP/client]

; HOSTNAME - The host name of this host if set to blank (default) the windows name of the computer will be used.
hostname = auto

; CHANNEL - The channel to listen to.
channel = NRDP


; Target definition for: default
[/settings/NRPE/client/targets/default]

; TIMEOUT - Timeout when reading/writing packets to/from sockets.
timeout = 30

; VERIFY MODE - What to verify default is non, to validate remote certificate use remote-peer
verify mode = none

; PAYLOAD LENGTH - Length of payload to/from the NRPE agent. This is a hard specific value so you have to "configure" (read recompile) your NRPE agent to use the same value for it to work.
payload length = 1024

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
use ssl = 1


; Section for WEB (WEBServer.dll) (check_WEB) protocol options.
[/settings/WEB/server]

; PORT NUMBER - Port to use for WEB server.
port = 8443s

; CERTIFICATE - Ssl certificate to use for the ssl server
certificate = ${certificate-path}/certificate.pem


; Target definition for: default
[/settings/SMTP/client/targets/default]

; SENDER - Sender of email message
sender = nscp@localhost

; TEMPLATE - Template for message data
template = Hello, this is %source% reporting %message%!

; TIMEOUT - Timeout when reading/writing packets to/from sockets.
timeout = 30

; RECIPIENT - Recipient of email message
recipient = nscp@localhost


; Files to be included in the configuration
[/includes]


; Section for the EventLog Checker (CheckEventLog.dll).
[/settings/eventlog]

; BUFFER_SIZE - The size of the buffer to use when getting messages this affects the speed and maximum size of messages you can recieve.
buffer size = 131072

; LOOKUP NAMES - Lookup the names of eventlog files
lookup names = 1

; DEBUG - Log more information when filtering (useful to detect issues with filters) not useful in production as it is a bit of a resource hog.
debug = 0


; Section for NRPE active/passive check module.
[/settings/NRPE/client]

; CHANNEL - The channel to listen to.
channel = NRPE


; Section for the Scheduler module.
[/settings/scheduler/schedules]


; A list of scripts available to run from the CheckExternalScripts module. Syntax is: <command>=<script> <arguments>
[/settings/external scripts/scripts]


; A list of aliases available.
;An alias is an internal command that has been predefined to provide a single command without arguments. Be careful so you don't create loops (ie check_loop=check_a, check_a=check_loop)
[/settings/external scripts/alias]

; alias_sched_all - Alias for alias_sched_all. To configure this item add a section called: /settings/external scripts/alias/alias_sched_all
alias_sched_all = check_tasksched show-all "syntax=${title}: ${exit_code}" "crit=exit_code ne 0"

; alias_file_size - Alias for alias_file_size. To configure this item add a section called: /settings/external scripts/alias/alias_file_size
alias_file_size = check_files "path=$ARG1$" "crit=size > $ARG2$" "top-syntax=${list}" "detail-syntax=${filename] ${size}" max-dir-depth=10

; alias_process_hung - Alias for alias_process_hung. To configure this item add a section called: /settings/external scripts/alias/alias_process_hung
alias_process_hung = check_process "filter=is_hung" "crit=count>0"

; alias_process - Alias for alias_process. To configure this item add a section called: /settings/external scripts/alias/alias_process
alias_process = check_process "process=$ARG1$" "crit=state != 'started'"

; alias_service_ex - Alias for alias_service_ex. To configure this item add a section called: /settings/external scripts/alias/alias_service_ex
alias_service_ex = check_service "exclude=Net Driver HPZ12" "exclude=Pml Driver HPZ12" exclude=stisvc

; alias_event_log - Alias for alias_event_log. To configure this item add a section called: /settings/external scripts/alias/alias_event_log
alias_event_log = check_eventlog

; alias_volumes_loose - Alias for alias_volumes_loose. To configure this item add a section called: /settings/external scripts/alias/alias_volumes_loose
alias_volumes_loose = check_drivesize

; alias_volumes - Alias for alias_volumes. To configure this item add a section called: /settings/external scripts/alias/alias_volumes
alias_volumes = check_drivesize

; alias_disk - Alias for alias_disk. To configure this item add a section called: /settings/external scripts/alias/alias_disk
alias_disk = check_drivesize

; alias_up - Alias for alias_up. To configure this item add a section called: /settings/external scripts/alias/alias_up
alias_up = check_uptime

; alias_cpu_ex - Alias for alias_cpu_ex. To configure this item add a section called: /settings/external scripts/alias/alias_cpu_ex
alias_cpu_ex = check_cpu "warn=load > $ARG1$" "crit=load > $ARG2$" time=5m time=1m time=30s

; alias_file_age - Alias for alias_file_age. To configure this item add a section called: /settings/external scripts/alias/alias_file_age
alias_file_age = check_files "path=$ARG1$" "crit=written > $ARG2$" "top-syntax=${list}" "detail-syntax=${filename] ${written}" max-dir-depth=10

; alias_process_stopped - Alias for alias_process_stopped. To configure this item add a section called: /settings/external scripts/alias/alias_process_stopped
alias_process_stopped = check_process "process=$ARG1$" "crit=state != 'stopped'"

; alias_service - Alias for alias_service. To configure this item add a section called: /settings/external scripts/alias/alias_service
alias_service = check_service

; alias_cpu - Alias for alias_cpu. To configure this item add a section called: /settings/external scripts/alias/alias_cpu
alias_cpu = check_cpu

; alias_mem - Alias for alias_mem. To configure this item add a section called: /settings/external scripts/alias/alias_mem
alias_mem = check_memory

; alias_process_count - Alias for alias_process_count. To configure this item add a section called: /settings/external scripts/alias/alias_process_count
alias_process_count = check_process "process=$ARG1$" "warn=count > $ARG2$" "crit=count > $ARG3$"

; alias_sched_long - Alias for alias_sched_long. To configure this item add a section called: /settings/external scripts/alias/alias_sched_long
alias_sched_long = check_tasksched "filter=status = 'running'" "detail-syntax=${title} (${most_recent_run_time})" "crit=most_recent_run_time < -$ARG1$"

; alias_sched_task - Alias for alias_sched_task. To configure this item add a section called: /settings/external scripts/alias/alias_sched_task
alias_sched_task = check_tasksched show-all "filter=title eq '$ARG1$'" "detail-syntax=${title} (${exit_code})" "crit=exit_code ne 0"

; alias_disk_loose - Alias for alias_disk_loose. To configure this item add a section called: /settings/external scripts/alias/alias_disk_loose
alias_disk_loose = check_drivesize


; Target definition for: default
[/settings/graphite/client/targets/default]

; PATH FOR VALUES - Path mapping for metrics
path = system.${hostname}.${check_alias}.${perf_alias}


; Modules written in dotnet/CLR
[/modules/dotnet]


; Add counters to check
[/settings/system/windows/counters]


; A set of filters to use in real-time mode
[/settings/logfile/real-time/checks]


; Section for simple cache module (SimpleCache.dll).
[/settings/cache]

; CHANNEL - The channel to listen to.
channel = CACHE

; PRIMARY CACHE INDEX - Set this to the value you want to use as unique key for the cache. Can be any arbitrary string as well as include any of the following special keywords:${command} = The command name, ${host} the host, ${channel} the recieving channel, ${alias} the alias for the command, ${alias-or-command} = alias if set otherweise command, ${message} = the message data (no escape), ${result} = The result status (number).
primary index = ${alias-or-command}


; Section for the Scheduler module.
[/settings/scheduler]

; THREAD COUNT - Number of threads to use.
threads = 5


; A list of templates for wrapped scripts.
;%SCRIPT% will be replaced by the actual script an %ARGS% will be replaced by any given arguments.
[/settings/external scripts/wrappings]

; BATCH FILE WRAPPING - 
bat = scripts\\%SCRIPT% %ARGS%

; VISUAL BASIC WRAPPING - 
vbs = cscript.exe //T:30 //NoLogo scripts\\lib\\wrapper.vbs %SCRIPT% %ARGS%

; POWERSHELL WRAPPING - 
ps1 = cmd /c echo scripts\\%SCRIPT% %ARGS%; exit($lastexitcode) | powershell.exe -command -


; A set of filters to use in real-time mode
[/settings/eventlog/real-time/filters]


[/paths]

; Path for shared-path - 
shared-path = C:\Program Files\NSClient++

; Path for exe-path - 
exe-path = C:\Program Files\NSClient++

; Path for crash-folder - 
crash-folder = C:\Program Files\NSClient++

; Path for certificate-path - 
certificate-path = ${shared-path}/security

; Path for base-path - 
base-path = C:\Program Files\NSClient++

; Path for module-path - 
module-path = ${shared-path}/modules

What is wrong? What am I missing here?


Thank you

Tom

[kwhogster]

Here is the nsclient log

2016-08-09 00:19:33: error:c:\source\nscp\modules\NRPEServer\NRPEServer.cpp:132: Certificate not found: C:\Program Files\NSClient++/security/certificate.pem (generating a default certificate)
2016-08-09 00:19:33: error:c:\source\nscp\modules\NRPEServer\NRPEServer.cpp:132: CA not found: C:\Program Files\NSClient++/security/ca.pem (generating a default CA)
2016-08-09 00:20:58: error:c:\source\nscp\include\nrpe/server/protocol.hpp:80: Rejected connection from: 10.2.8.79
2016-08-09 00:22:59: error:c:\source\nscp\include\nrpe/server/protocol.hpp:80: Rejected connection from: 10.2.8.79
2016-08-09 00:23:58: error:c:\source\nscp\include\nrpe/server/protocol.hpp:80: Rejected connection from: 10.2.8.79
2016-08-09 00:24:58: error:c:\source\nscp\include\nrpe/server/protocol.hpp:80: Rejected connection from: 10.2.8.79
2016-08-09 00:25:58: error:c:\source\nscp\include\nrpe/server/protocol.hpp:80: Rejected connection from: 10.2.8.79
2016-08-09 00:26:59: error:c:\source\nscp\include\nrpe/server/protocol.hpp:80: Rejected connection from: 10.2.8.79
2016-08-09 00:27:59: error:c:\source\nscp\include\nrpe/server/protocol.hpp:80: Rejected connection from: 10.2.8.79
2016-08-09 00:28:10: error:c:\source\nscp\service\NSClient++.cpp:214: Failed to register plugin LUAScript: Could not load library: 126: The specified module could not be found.

: LUAScript.dll
2016-08-09 00:28:59: error:c:\source\nscp\include\nrpe/server/protocol.hpp:80: Rejected connection from: 10.2.8.79
2016-08-09 00:32:59: error:c:\source\nscp\include\socket/connection.hpp:240: Seems we cant agree on SSL: no shared cipher
2016-08-09 00:32:59: error:c:\source\nscp\include\socket/connection.hpp:241: PLease review the legacy as well as ssl options in settings.
2016-08-09 00:33:59: error:c:\source\nscp\include\socket/connection.hpp:240: Seems we cant agree on SSL: no shared cipher
2016-08-09 00:33:59: error:c:\source\nscp\include\socket/connection.hpp:241: PLease review the legacy as well as ssl options in settings.
2016-08-09 00:34:59: error:c:\source\nscp\include\socket/connection.hpp:240: Seems we cant agree on SSL: no shared cipher
2016-08-09 00:34:59: error:c:\source\nscp\include\socket/connection.hpp:241: PLease review the legacy as well as ssl options in settings.
2016-08-09 00:35:59: error:c:\source\nscp\include\socket/connection.hpp:240: Seems we cant agree on SSL: no shared cipher
2016-08-09 00:35:59: error:c:\source\nscp\include\socket/connection.hpp:241: PLease review the legacy as well as ssl options in settings.
2016-08-09 00:36:59: error:c:\source\nscp\include\socket/connection.hpp:240: Seems we cant agree on SSL: no shared cipher
2016-08-09 00:36:59: error:c:\source\nscp\include\socket/connection.hpp:241: PLease review the legacy as well as ssl options in settings.
2016-08-09 00:37:59: error:c:\source\nscp\include\socket/connection.hpp:240: Seems we cant agree on SSL: no shared cipher
2016-08-09 00:37:59: error:c:\source\nscp\include\socket/connection.hpp:241: PLease review the legacy as well as ssl options in settings.
2016-08-09 00:38:59: error:c:\source\nscp\include\socket/connection.hpp:240: Seems we cant agree on SSL: no shared cipher
2016-08-09 00:38:59: error:c:\source\nscp\include\socket/connection.hpp:241: PLease review the legacy as well as ssl options in settings.


thoughts

Thanks

Tom

[Box293]

Can you upload the nsclient.ini file as a file please.

Can you please show us the command line test of the command that is not working.

[kwhogster]

Troy

root@tgcs017:/usr/lib/nagios/plugins# ./check_nt -H 10.2.8.69 -p 12489 -v USEDDISKSPACE -l c
CRITICAL - Socket timeout after 10 seconds

Same results


See attached ini


Update

I tried this adding -t 30 to the command

thomas@tgcs017:/usr/local/nagios/etc/objects$ /usr/lib/nagios/plugins/./check_nt -H 10.2.8.69 -p 12489 -v USEDDISKSPACE -l c -t 30
CRITICAL - Socket timeout after 30 seconds



Update again ran NMAP

thomas@tgcs017:/usr/local/nagios/etc/objects$ nmap 10.2.8.69 -p 12489

Starting Nmap 7.01 ( https://nmap.org ) at 2016-08-09 16:23 EDT
Nmap scan report for tgkw001.our.network.tgcsnet.com (10.2.8.69)
Host is up (0.00095s latency).
PORT STATE SERVICE
12489/tcp filtered unknown

Nmap done: 1 IP address (1 host up) scanned in 0.27 seconds

[tgriep]

Can you edit the nsclient.ini file on that system and change the following from

Code: Select all

NSClientServer = 0

to

Code: Select all

NSClientServer = 1

Then restart the NSClient++ service and that should fix the issue.
Try that and let us know if it works.

[Box293]

In addition to this, your ini file has a password and your check_nt command is not providing -s XXXXXXXX

Code: Select all

./check_nt -H 10.2.8.69 -p 12489 -s XXXXXXXX -v USEDDISKSPACE -l c