NRPE NSClient++ check_cpu negative values

[mhixson2]

Thanks. I've added it and now we wait. I really like the 'max size' option. I didn't know that was a thing.

All perfdata values have been positive over the last few checks. I'll post up the log once it goes negative again.

[rkennedy]

Sounds good, I'll leave this open should you have a negative update for us.

[mhixson2]

Ok, I have negative results in the graph between about 3 and 4 am this morning. Log below. I don't see anything unusual in there - do you?

2016-09-28_16-40-31.png

Code: Select all

2016-09-28 03:05:22: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:05:28: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:05:28: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:05:28: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:05:29: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:06:00: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:06:00: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl K
2016-09-28 03:06:01: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:06:01: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl R
2016-09-28 03:06:14: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:06:14: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl M
2016-09-28 03:06:16: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:06:16: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl T
2016-09-28 03:06:25: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:06:25: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\drive_space_nonclustered.bat 85 90
2016-09-28 03:06:25: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:06:25: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl Q
2016-09-28 03:06:26: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:06:26: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl L
2016-09-28 03:09:19: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:09:19: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl H
2016-09-28 03:09:19: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:09:19: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl C
2016-09-28 03:09:19: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:09:19: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl D
2016-09-28 03:09:19: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:09:19: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl F
2016-09-28 03:09:20: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:09:20: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl E
2016-09-28 03:09:20: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:09:20: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl G
2016-09-28 03:09:33: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:09:49: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:09:49: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl I
2016-09-28 03:09:54: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:09:54: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl J
2016-09-28 03:10:20: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:10:25: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:10:26: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:10:26: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:10:27: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:10:58: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:10:58: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl K
2016-09-28 03:10:59: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:10:59: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl R
2016-09-28 03:11:12: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:11:12: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl M
2016-09-28 03:11:14: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:11:14: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl T
2016-09-28 03:11:23: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:11:23: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\drive_space_nonclustered.bat 85 90
2016-09-28 03:11:24: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:11:24: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl L
2016-09-28 03:11:24: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:11:24: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl Q
2016-09-28 03:14:17: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:14:17: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl H
2016-09-28 03:14:17: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:14:17: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl C
2016-09-28 03:14:17: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:14:17: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl D
2016-09-28 03:14:17: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:14:17: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl F
2016-09-28 03:14:18: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:14:18: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl E
2016-09-28 03:14:18: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:14:18: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl G
2016-09-28 03:14:31: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:14:47: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:14:47: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl I
2016-09-28 03:14:52: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:14:52: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl J
2016-09-28 03:15:18: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:15:23: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:15:24: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:15:24: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:15:25: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:15:56: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:15:56: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl K
2016-09-28 03:15:57: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:15:57: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl R
2016-09-28 03:16:10: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:16:10: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl M
2016-09-28 03:16:12: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:16:12: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl T
2016-09-28 03:16:21: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:16:21: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\drive_space_nonclustered.bat 85 90
2016-09-28 03:16:22: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:16:22: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl Q
2016-09-28 03:16:23: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:16:23: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl L
2016-09-28 03:19:15: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:19:15: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl H
2016-09-28 03:19:15: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:19:15: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:19:15: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl C
2016-09-28 03:19:15: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl D
2016-09-28 03:19:15: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:19:15: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl F
2016-09-28 03:19:16: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:19:16: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl E
2016-09-28 03:19:16: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:19:16: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl G
2016-09-28 03:19:29: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:19:45: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:19:45: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl I
2016-09-28 03:19:49: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:19:49: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl J
2016-09-28 03:20:16: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:20:20: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:20:22: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:20:22: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:20:23: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:20:54: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:20:54: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl K
2016-09-28 03:20:55: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:20:55: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl R
2016-09-28 03:21:08: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:21:08: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl M
2016-09-28 03:21:10: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:21:10: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl T
2016-09-28 03:21:19: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:21:19: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\drive_space_nonclustered.bat 85 90
2016-09-28 03:21:20: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:21:20: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl Q
2016-09-28 03:21:21: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:21:21: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl L
2016-09-28 03:24:13: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:24:13: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl H
2016-09-28 03:24:13: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:24:13: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl D
2016-09-28 03:24:13: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:24:13: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl C
2016-09-28 03:24:13: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:24:13: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl F
2016-09-28 03:24:14: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:24:14: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl E
2016-09-28 03:24:17: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:24:17: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl G
2016-09-28 03:24:25: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:24:43: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:24:43: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl I
2016-09-28 03:24:47: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:24:47: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl J
2016-09-28 03:25:14: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:25:18: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:25:20: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:25:20: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:25:21: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:25:52: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:25:52: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl K
2016-09-28 03:25:53: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:25:53: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl R
2016-09-28 03:26:06: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:26:06: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl M
2016-09-28 03:26:08: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:26:08: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl T
2016-09-28 03:26:17: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:26:17: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\drive_space_nonclustered.bat 85 90
2016-09-28 03:26:19: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:26:19: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl Q
2016-09-28 03:26:19: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:26:19: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl L
2016-09-28 03:29:11: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:29:11: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl H
2016-09-28 03:29:11: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:29:11: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl D
2016-09-28 03:29:11: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:29:11: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl C
2016-09-28 03:29:11: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:29:11: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl F
2016-09-28 03:29:12: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:29:12: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl E
2016-09-28 03:29:12: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:29:12: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl G
2016-09-28 03:29:23: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:29:41: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:29:41: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl I
2016-09-28 03:29:45: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:29:45: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl J
2016-09-28 03:30:12: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:30:16: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:30:18: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:30:18: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:30:19: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:30:51: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:30:51: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl K
2016-09-28 03:30:51: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:30:51: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl R
2016-09-28 03:31:04: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:31:04: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl M
2016-09-28 03:31:06: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:31:06: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl T
2016-09-28 03:31:15: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:31:15: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\drive_space_nonclustered.bat 85 90
2016-09-28 03:31:17: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:31:17: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl L
2016-09-28 03:31:17: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:31:17: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl Q
2016-09-28 03:34:08: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:34:08: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl C
2016-09-28 03:34:08: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:34:08: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl F
2016-09-28 03:34:09: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:34:09: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl H
2016-09-28 03:34:09: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:34:09: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl D
2016-09-28 03:34:10: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:34:10: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl E
2016-09-28 03:34:10: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:34:10: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl G
2016-09-28 03:34:21: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:34:39: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:34:39: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl I
2016-09-28 03:34:43: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:34:43: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl J
2016-09-28 03:35:10: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:35:14: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:35:16: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:35:16: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:35:17: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:35:48: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:35:48: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl K
2016-09-28 03:35:49: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:35:49: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl R
2016-09-28 03:36:02: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:36:02: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl M
2016-09-28 03:36:04: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:36:04: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl T
2016-09-28 03:36:13: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:36:13: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\drive_space_nonclustered.bat 85 90
2016-09-28 03:36:15: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:36:15: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl L
2016-09-28 03:36:15: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:36:15: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl Q
2016-09-28 03:39:06: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:39:06: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl F
2016-09-28 03:39:07: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:39:07: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl C
2016-09-28 03:39:07: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:39:07: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl H
2016-09-28 03:39:07: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:39:07: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl D
2016-09-28 03:39:08: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:39:08: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl E
2016-09-28 03:39:08: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:39:08: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl G
2016-09-28 03:39:19: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:39:37: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:39:37: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl I
2016-09-28 03:39:41: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:39:41: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl J
2016-09-28 03:40:08: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:40:12: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:40:14: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:40:14: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:40:15: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:40:46: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:40:46: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl K
2016-09-28 03:40:47: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:40:47: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl R
2016-09-28 03:41:00: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:41:00: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl M
2016-09-28 03:41:02: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:41:02: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl T
2016-09-28 03:41:11: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:41:11: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\drive_space_nonclustered.bat 85 90
2016-09-28 03:41:13: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:41:13: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl Q
2016-09-28 03:41:13: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:41:14: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl L
2016-09-28 03:44:04: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:44:04: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl F
2016-09-28 03:44:05: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:44:05: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl D
2016-09-28 03:44:06: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:44:06: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:44:06: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl H
2016-09-28 03:44:06: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl C
2016-09-28 03:44:06: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:44:06: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl E
2016-09-28 03:44:06: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:44:06: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl G
2016-09-28 03:44:17: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:44:36: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:44:36: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl I
2016-09-28 03:44:39: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:44:39: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl J
2016-09-28 03:45:06: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:45:10: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:45:12: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:45:12: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:45:13: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:45:44: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:45:44: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl K
2016-09-28 03:45:45: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:45:45: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl R
2016-09-28 03:45:58: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:45:58: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl M
2016-09-28 03:46:00: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:46:00: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl T
2016-09-28 03:46:10: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:46:10: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\drive_space_nonclustered.bat 85 90
2016-09-28 03:46:11: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:46:11: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl Q
2016-09-28 03:46:11: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:46:11: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl L
2016-09-28 03:49:02: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:49:02: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl F
2016-09-28 03:49:03: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:49:03: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl D
2016-09-28 03:49:04: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:49:04: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl C
2016-09-28 03:49:04: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:49:04: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl H
2016-09-28 03:49:05: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:49:05: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl E
2016-09-28 03:49:05: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:49:05: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl G
2016-09-28 03:49:15: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:49:35: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:49:35: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl I
2016-09-28 03:49:37: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:49:37: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl J
2016-09-28 03:50:05: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:50:08: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:50:10: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:50:10: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:50:11: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:50:42: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:50:42: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl K
2016-09-28 03:50:43: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:50:43: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl R
2016-09-28 03:50:56: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:50:56: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl M
2016-09-28 03:50:58: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:50:58: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl T
2016-09-28 03:51:08: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:51:08: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\drive_space_nonclustered.bat 85 90
2016-09-28 03:51:09: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:51:09: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl L
2016-09-28 03:51:09: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:51:09: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl Q
2016-09-28 03:54:00: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:54:00: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl F
2016-09-28 03:54:01: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:54:01: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl D
2016-09-28 03:54:02: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:54:02: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl C
2016-09-28 03:54:02: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:54:02: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl H
2016-09-28 03:54:03: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:54:03: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl E
2016-09-28 03:54:03: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:54:03: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl G
2016-09-28 03:54:13: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:54:33: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:54:34: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl I
2016-09-28 03:54:36: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:54:36: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl J
2016-09-28 03:55:03: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:55:06: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:55:08: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:55:08: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:55:09: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:55:40: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:55:40: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl K
2016-09-28 03:55:41: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:55:41: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl R
2016-09-28 03:55:54: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:55:54: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl M
2016-09-28 03:55:57: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:55:57: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl T
2016-09-28 03:56:06: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:56:06: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\drive_space_nonclustered.bat 85 90
2016-09-28 03:56:07: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:56:07: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl L
2016-09-28 03:56:07: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:56:07: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl Q
2016-09-28 03:58:58: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:58:58: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl F
2016-09-28 03:58:59: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:58:59: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl D
2016-09-28 03:59:00: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:59:00: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl C
2016-09-28 03:59:00: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:59:00: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl H
2016-09-28 03:59:01: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:59:01: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl E
2016-09-28 03:59:01: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:59:01: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl G
2016-09-28 03:59:11: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:59:31: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:59:31: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl I
2016-09-28 03:59:35: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 03:59:35: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl J
2016-09-28 04:00:01: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 04:00:05: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 04:00:06: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 04:00:06: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 04:00:07: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 04:00:38: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 04:00:38: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl K
2016-09-28 04:00:39: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 04:00:39: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl R
2016-09-28 04:00:52: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 04:00:52: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl M
2016-09-28 04:00:55: debug:c:\source\nscp\include\nrpe/server/protocol.hpp:74: Accepting connection from: 10.220.102.42, count=1
2016-09-28 04:00:55: debug:c:\source\nscp\modules\CheckExternalScripts\CheckExternalScripts.cpp:459: Command line: scripts\custom\disk_load.bat -dl T

[mcapra]

Can you share the output of:

Code: Select all

/usr/local/nagios/libexec/check_nrpe

I'd be interested to see what check_nrpe version you're using. We haven't been able to replicate this internally. Definitely looks like some sort of integer overflow.

There's also this in the NSClient++ changelogs:

Code: Select all

2015-11-20 Michael Medin
 ! Release 0.5.0.16
 * Fixed #201 negative perf data in checks

You might try using the latest stable version of 0.5:
https://www.nsclient.org/download/

[mhixson2]

Code: Select all

$ /usr/local/nagios/libexec/check_nrpe
Incorrect command line arguments supplied

NRPE Plugin for Nagios
Copyright (c) 1999-2008 Ethan Galstad ([email protected])
Version: 2.15
Last Modified: 09-06-2013
License: GPL v2 with exemptions (-l for more info)
SSL/TLS Available: Anonymous DH Mode, OpenSSL 0.9.6 or higher required

I've updated the client to NSCP-0.5.0.62-x64 and renamed the CPU.rrd and xml files to start the graph over. Fingers crossed.
Look for an update from me on Tues 10/4 when I return to the office. Thanks for the help.

[rkennedy]

Sounds good - I'll leave this open awaiting your response.

[mhixson2]

More occurrences of negative perfdata happened over the weekend (9/30, 10/2, 10/3 - all around 3am). When I upgraded NSClient again, I overwrote the default nsclient.ini with my custom config, which did not have debug logging enabled. Below is what the log captured (without debugging) around the time of one of these negative occurrences. Debug logging is now active again.

The logs appear to be three hours behind the server (so 00:00 log time = 03:00 server time).

Code: Select all

2016-10-03 00:01:31: error:c:\source\master\include\socket/connection.hpp:120: Socket was unexpectedly closed trying to send data (possibly check your timeout settings)
2016-10-03 00:02:06: error:c:\source\master\include\socket/connection.hpp:120: Socket was unexpectedly closed trying to send data (possibly check your timeout settings)
2016-10-03 00:02:06: error:c:\source\master\include\socket/connection.hpp:120: Socket was unexpectedly closed trying to send data (possibly check your timeout settings)
2016-10-03 00:02:06: error:c:\source\master\include\socket/connection.hpp:120: Socket was unexpectedly closed trying to send data (possibly check your timeout settings)
2016-10-03 00:06:03: error:c:\source\master\include\socket/connection.hpp:120: Socket was unexpectedly closed trying to send data (possibly check your timeout settings)
2016-10-03 00:06:03: error:c:\source\master\include\socket/connection.hpp:120: Socket was unexpectedly closed trying to send data (possibly check your timeout settings)
2016-10-04 00:02:41: error:c:\source\master\include\socket/connection.hpp:120: Socket was unexpectedly closed trying to send data (possibly check your timeout settings)
2016-10-04 00:03:04: error:c:\source\master\include\socket/connection.hpp:120: Socket was unexpectedly closed trying to send data (possibly check your timeout settings)
2016-10-04 00:03:18: error:c:\source\master\include\socket/connection.hpp:120: Socket was unexpectedly closed trying to send data (possibly check your timeout settings)
2016-10-04 00:07:16: error:c:\source\master\include\socket/connection.hpp:120: Socket was unexpectedly closed trying to send data (possibly check your timeout settings)
2016-10-04 00:07:16: error:c:\source\master\include\socket/connection.hpp:120: Socket was unexpectedly closed trying to send data (possibly check your timeout settings)
2016-10-04 00:07:16: error:c:\source\master\include\socket/connection.hpp:120: Socket was unexpectedly closed trying to send data (possibly check your timeout settings)
2016-10-04 00:07:16: error:c:\source\master\include\socket/connection.hpp:257: Failed to establish secure connection: short read: 219
2016-10-04 00:07:24: error:c:\source\master\include\socket/connection.hpp:257: Failed to establish secure connection: An existing connection was forcibly closed by the remote host: 1862
2016-10-04 00:07:24: error:c:\source\master\include\socket/connection.hpp:257: Failed to establish secure connection: An existing connection was forcibly closed by the remote host: 1862

2016-10-04_09-52-17.png

What timeout is the log referring to? A global setting, or the -t value in my check command? /usr/local/nagios/libexec/check_nrpe -H HOSTNAME -u -t 30 -c check_cpu -a 'warn=0' 'crit=load ge 98%'

[lmiltchev]

More occurrences of negative perfdata happened over the weekend (9/30, 10/2, 10/3 - all around 3am).

Are you experiencing a high load on the server due to backups or other jobs running at this time? It is possible that this is a networking issue.

Some users reported similar errors, i.e.

Failed to establish secure connection: An existing connection was forcibly closed by the remote host: 1862

caused by firewall issues:

http://forums.nsclient.org/t/nsclient-0 ... ost/4065/2

Can you run the following command on the Nagios XI server, and show the output?

Code: Select all

nmap <client ip> -p 12489,5666

[mhixson2]

I think all our SQL jobs run earlier in the night, but that's a good idea, I'll check that with our DBAs. They're a wild and crazy bunch that might have just scheduled all jobs on this server at 3am. I'll report back.

All of our checks are NRPE.

Code: Select all

sudo nmap [HOST IP] -p 12489,5666

Starting Nmap 5.51 ( http://nmap.org ) at 2016-10-05 14:30 EDT
Nmap scan report for [HOST FQDN] [HOST IP]
Host is up (0.00049s latency).
PORT      STATE  SERVICE
5666/tcp  open   nrpe
12489/tcp closed unknown

Nmap done: 1 IP address (1 host up) scanned in 0.10 seconds

[lmiltchev]

Sounds good, mhixson2! Let us know about your findings. We will keep the thread open. Make sure you don't have any check_nt checks as port 12489 seems to be closed.