Configuration of HPE Nimble in Nagios XI

[Srinija544]

Moderator Note: Content removed per request

[lmiltchev]

Can you elaborate on what do you consider to be a "Nimble host"? You have some servers, that use Nimble Storage, and you would like to monitor them in Nagios XI, correct? What kind of operating systems do you have on these servers? What metrics would you like to monitor? We need some more details on your network.

[Srinija544]

Hi lmiltchev,

I am not sure about the Operating system but We used to monitor 3 PAR Storage Array.
Please find the attached screenshot. we need to monitor all the services on 3 PAR for Nimble also.

Regards,
Srinija.

[lmiltchev]

I am not familiar with Nimble but after doing some research I found out that HPE 3PAR supports all major operating systems. In order to know how to monitor services on this system, we would need to know what it is. Maybe showing us some of your existent checks will help. Go to the Core Config Manager (CCM) > Services, and select your "Prod - 3PAR Storage Array" host from the drop-down menu to view the services. Click on any of the View config actions button on the right. This should show you the configs for all of the services on that host. Copy and paste the text on the forum. You may want to remove/obfuscate any sensitive information before posting the output on the forum. Thanks!

[Srinija544]

Hi lmiltchev,

I have followed the steps which are suggested by you. Please find the below:

================================================================

define service {
host_name Hostname
service_description Current Service Time
check_command check_3par!check_vv_svt
max_check_attempts 10
check_interval 5
retry_interval 1
register 1
}

define service {
host_name Hostname
service_description FC disk capacity
check_command check_3par!check_cap_fc!!!!!!!
register 1
}

define service {
host_name Hostname
service_description FC ports
check_command check_3par!check_port_fc
register 1
}

define service {
host_name Hostname
service_description Logical disk
check_command check_3par!check_ld
register 1
}

define service {
host_name Hostname
service_description NL disk capacity
check_command check_3par!check_cap_nl -W 90 -C 95
register 1
}

define service {
host_name Hostname
service_description Nodes
check_command check_3par!check_node
register 1
}

define service {
host_name Hostname
service_description Physical disks
check_command check_3par!check_pd
register 1
}

define service {
host_name Hostname
service_description Virtual volumes
check_command check_3par!check_vv
register 1
}

============================================

Regards,
Srinija.

[lmiltchev]

You have many custom (non-default) commands, so instead of asking you to post each one on the forum, it would be easier if you could just PM me your latest profile. Go to Admin > System Config > System Profile, click on "Download Profile", safe and PM me the "profile.zip" file. Don't post the profile on the forum as it may contain some sensitive info. Thanks!

[Srinija544]

Hi all,

Thank you so much for your support.

These new alert configurations are no more required in our project.

we can close this request now.

Regards,
Srinija.

[scottwilkerson]

Hi all,

Thank you so much for your support.

These new alert configurations are no more required in our project.

we can close this request now.

Regards,
Srinija.

Grewat!

Locking