Nagios Log server Installation Errors

[nanduri]

Hello Everyone

when I ran ./fullinstall got so many compile error sorted out one by one but stuck with below , either I was able to run only one apache or httpd , if I bring httpd after some struggle apache is going down , below is the journalctl error if I kill and restart one service would work and another service would go down for e.g apache will go down if bring httpd and vice-versa

Journalctl error:

98)Address already in use: AH00072: make_sock: could not bind to address [::]:80
Jun 29 16:12:02 uzernsgwr1 apachectl[29375]: (98)Address already in use: AH00072: make_sock: could not bind to address 0.0.0.0:80


INSTALLATION ERROR:

Running 'nagioslogserver'...
Job for httpd.service failed because the control process exited with error code. See "systemctl status httpd.service" and "journalctl -xe" for details.

===================
INSTALLATION ERROR!
===================
Installation step failed - exiting.
Check for error messages in the install log (install.log).

If you require assistance in resolving the issue, please include install.log
in your communications with Nagios Enterprises technical support.

[jbrunkow]

Are you trying to configure Log Server on a machine that is already hosting another website? "Apache" and "httpd" are pretty much different names for the same service. I suppose that you could configure multiple sites using virtual hosts, but we highly recommend that Log Server is cleanly installed on its own machine.

Can you please show us the contents of your install.log? That may tell us more about what's going on.

[nanduri]

Hi ,

yes the machine i'm trying to install already hosts another website (nagios core , etc)its not the clean machine


##############################################3
Here is the output from install.log
##############
Updated:
net-snmp.x86_64 1:5.7.2-48.el7_8.1 net-snmp-utils.x86_64 1:5.7.2-48.el7_8.1
ntp.x86_64 0:4.2.6p5-29.el7_8.2

Dependency Updated:
net-snmp-agent-libs.x86_64 1:5.7.2-48.el7_8.1
net-snmp-devel.x86_64 1:5.7.2-48.el7_8.1
net-snmp-libs.x86_64 1:5.7.2-48.el7_8.1
ntpdate.x86_64 0:4.2.6p5-29.el7_8.2

Complete!
29 Jun 15:47:15 ntpdate[26187]: adjust time server 159.203.8.72 offset -0.001442 sec
fullinstall: line 149: pip: command not found

===================
INSTALLATION ERROR!
===================
Installation step failed - exiting.
Check for error messages in the install log (install.log).

If you require assistance in resolving the issue, please include install.log
in your communications with Nagios Enterprises technical support.

The step that failed was: 'prereqs'

Nagios Log Server Installation
==============================
DATE: Mon Jun 29 15:51:55 ADT 2020

DISTRO INFO:
RedHatEnterpriseServer


Running 'setup_local_syslog'...
setup_local_syslog step already completed - skipping
Running 'prereqs'...
epel-release RPM installed OK
Loaded plugins: langpacks, product-id, search-disabled-repos, subscription-
: manager
No package python2-pip available.
Package ipa-gothic-fonts-003.03-5.el7.noarch already installed and latest version
Package ipa-mincho-fonts-003.03-5.el7.noarch already installed and latest version
Package ipa-pgothic-fonts-003.03-5.el7.noarch already installed and latest version
Package ipa-pmincho-fonts-003.03-5.el7.noarch already installed and latest version
Package pyOpenSSL-0.13.1-4.el7.x86_64 already installed and latest version
Package python-2.7.5-88.el7.x86_64 already installed and latest version
Package ntp-4.2.6p5-29.el7_8.2.x86_64 already installed and latest version
Package byacc-1.9.20130304-3.el7.x86_64 already installed and latest version
Package cairo-devel-1.15.12-4.el7.x86_64 already installed and latest version
Package gcc-4.8.5-39.el7.x86_64 already installed and latest version
Package glib2-devel-2.56.1-5.el7.x86_64 already installed and latest version
Package glibc-2.17-307.el7.1.x86_64 already installed and latest version
Package 1:java-1.8.0-openjdk-1.8.0.252.b09-2.el7_8.x86_64 already installed and latest version
Package libxml2-devel-2.9.1-6.el7.4.x86_64 already installed and latest version
Package 1:make-3.82-24.el7.x86_64 already installed and latest version
Package 1:net-snmp-5.7.2-48.el7_8.1.x86_64 already installed and latest version
Package 1:net-snmp-utils-5.7.2-48.el7_8.1.x86_64 already installed and latest version
Package 1:openssl-1.0.2k-19.el7.x86_64 already installed and latest version
Package patch-2.7.1-12.el7_7.x86_64 already installed and latest version
Package pango-devel-1.42.4-4.el7_7.x86_64 already installed and latest version
Package perl-ExtUtils-MakeMaker-6.68-3.el7.noarch already installed and latest version
Package sendmail-8.14.7-6.el7.x86_64 already installed and latest version
Package httpd-2.4.6-93.el7.x86_64 already installed and latest version
Package php-5.4.16-48.el7.x86_64 already installed and latest version
Package php-cli-5.4.16-48.el7.x86_64 already installed and latest version
No package rc available.
Package wget-1.14-18.el7_6.1.x86_64 already installed and latest version
Package sudo-1.8.23-9.el7.x86_64 already installed and latest version
Package sysstat-10.1.5-19.el7.x86_64 already installed and latest version
Package unzip-6.0-21.el7.x86_64 already installed and latest version
Package zip-3.0-11.el7.x86_64 already installed and latest version
Package net-tools-2.0-0.25.20131004git.el7.x86_64 already installed and latest version
Package php-ldap-5.4.16-48.el7.x86_64 already installed and latest version
Package php-devel-5.4.16-48.el7.x86_64 already installed and latest version
Nothing to do
29 Jun 15:52:21 ntpdate[26719]: adjust time server 206.108.0.133 offset 0.001989 sec
DEPRECATION: Python 2.7 reached the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 is no longer maintained. pip 21.0 will drop support for Python 2.7 in January 2021. More details about Python 2 support in pip, can be found at https://pip.pypa.io/en/latest/developme ... -2-support
Collecting argparse
Downloading argparse-1.4.0-py2.py3-none-any.whl (23 kB)
Collecting elasticsearch-curator==3.4.0
Downloading elasticsearch_curator-3.4.0-py2.py3-none-any.whl (43 kB)
Collecting click>=3.3
Downloading click-7.1.2-py2.py3-none-any.whl (82 kB)
Collecting elasticsearch<2.1.0,>=1.8.0
Downloading elasticsearch-2.0.0-py2.py3-none-any.whl (58 kB)
Requirement already satisfied, skipping upgrade: urllib3<2.0,>=1.8 in /usr/lib/python2.7/site-packages (from elasticsearch<2.1.0,>=1.8.0->elasticsearch-curator==3.4.0) (1.21.1)
Installing collected packages: argparse, click, elasticsearch, elasticsearch-curator
Successfully installed argparse-1.4.0 click-7.1.2 elasticsearch-2.0.0 elasticsearch-curator-3.4.0
prereqs step completed OK
Running 'sourceguardian'...
Installing sourceguardian...
Archive: sourceguardian/ixed4.lin.x86-64.zip
inflating: /usr/lib64/php/modules/ixed.5.4.lin
Sourceguardian extension found for PHP version 5.4
Adding Sourceguardian extension to php.ini
sourceguardian step completed OK
Running 'timezone'...
timezone step completed OK
Running 'nagioslogserver'...
Job for httpd.service failed because the control process exited with error code. See "systemctl status httpd.service" and "journalctl -xe" for details.

===================
INSTALLATION ERROR!
===================
Installation step failed - exiting.
Check for error messages in the install log (install.log).

If you require assistance in resolving the issue, please include install.log
in your communications with Nagios Enterprises technical support.

The step that failed was: 'nagioslogserver'

Nagios Log Server Installation
==============================
DATE: Mon Jun 29 16:14:52 ADT 2020

DISTRO INFO:
RedHatEnterpriseServer

Running 'setup_local_syslog'...
setup_local_syslog step already completed - skipping
Running 'prereqs'...
prereqs step already completed - skipping
Running 'sourceguardian'...
sourceguardian step already completed - skipping
Running 'timezone'...
timezone step already completed - skipping
Running 'nagioslogserver'...
Job for httpd.service failed because the control process exited with error code. See "systemctl status httpd.service" and "journalctl -xe" for details.

===================
INSTALLATION ERROR!
===================
Installation step failed - exiting.
Check for error messages in the install log (install.log).

If you require assistance in resolving the issue, please include install.log
in your communications with Nagios Enterprises technical support.

The step that failed was: 'nagioslogserver'

[jbrunkow]

Unfortunately, we cannot support installing Nagios Log Server on a machine already running Nagios Core. Can you install Log Server on a clean machine? I think you will run in to less issues that way, with less conflicting packages.