Upgrade to 3.3 ?

This support forum board is for support questions relating to Nagios XI, our flagship commercial network monitoring solution.
Locked
User avatar
sikainfo
Posts: 105
Joined: Thu Mar 29, 2012 3:26 am

Re: Upgrade to 3.3 ?

Post by sikainfo »

does run fine ....

Code: Select all

yum install expat
Loaded plugins: product-id, refresh-packagekit, rhnplugin, security,
              : subscription-manager
Updating certificate-based repositories.
rhel-6-server-cf-tools-1-rpms                            | 2.8 kB     00:00
rhel-6-server-optional-rpms                              | 3.5 kB     00:00
rhel-6-server-rpms                                       | 3.7 kB     00:00
rhel-6-server-supplementary                              | 3.5 kB     00:00
rhel-6-server-supplementary-src                          | 2.6 kB     00:00
Setting up Install Process
Package expat-2.0.1-11.el6_2.x86_64 already installed and latest version
Nothing to do
Top
mguthrie
Posts: 4380
Joined: Mon Jun 14, 2010 10:21 am

Re: Upgrade to 3.3 ?

Post by mguthrie »

These are the prereqs that are being installed for 3.3, are you able to run through this list and see if they'll install?

Code: Select all

yum install -y bc dstat expat-devel mailx mod_ssl numpy openldap openldap-devel perl-Mail-IMAPClient perl-DBD-MySQL perl-Net-DNS python-lxml pymssql python-simplejson rpmdevtools rrdtool-python sudo traceroute
Top
User avatar
sikainfo
Posts: 105
Joined: Thu Mar 29, 2012 3:26 am

Re: Upgrade to 3.3 ?

Post by sikainfo »

Hi sorry I think we are turning circles here .....

yum is telling us that we have two packages "rrdtool ...." and the "libxml2..." which it cannot install, and this since the first message i sent.
As I wrote, there seems to be a problem between the required 32bit package and the allready installed 64bit package. What i do not understand all the earlier updates where running just fine, and wiht this one it start to get troubles. I did not change the rrdtool since the last update ????

Anyway once again below the same output like before:

Code: Select all

yum install -y bc dstat expat-devel mailx mod_ssl numpy openldap openldap-devel perl-Mail-IMAPClient perl-DBD-MySQL perl-Net-DNS python-lxml pymssql python-simplejson rpmdevtools rrdtool-python sudo traceroute
Loaded plugins: product-id, refresh-packagekit, rhnplugin, security, subscription-manager
Updating certificate-based repositories.
rhel-6-server-cf-tools-1-rpms                                                                                                    | 2.8 kB     00:00
rhel-6-server-optional-rpms                                                                                                      | 3.5 kB     00:00
rhel-6-server-rpms                                                                                                               | 3.7 kB     00:00
rhel-6-server-supplementary                                                                                                      | 3.5 kB     00:00
rhel-6-server-supplementary-src                                                                                                  | 2.6 kB     00:00
Setting up Install Process
Package bc-1.06.95-1.el6.x86_64 already installed and latest version
Package matching dstat-0.7.0-1.el6.noarch already installed. Checking for update.
Package expat-devel-2.0.1-11.el6_2.x86_64 already installed and latest version
Package mailx-12.4-6.el6.x86_64 already installed and latest version
Package 1:mod_ssl-2.2.15-15.el6_2.1.x86_64 already installed and latest version
Package numpy-1.4.1-9.el6.x86_64 already installed and latest version
Package openldap-2.4.23-26.el6_3.2.x86_64 already installed and latest version
Package openldap-devel-2.4.23-26.el6_3.2.x86_64 already installed and latest version
No package perl-Mail-IMAPClient available.
Package matching perl-DBD-MySQL-4.013-3.el6.x86_64 already installed. Checking for update.
Package python-lxml-2.2.3-1.1.el6.x86_64 already installed and latest version
Package python-simplejson-2.0.9-3.1.el6.x86_64 already installed and latest version
Package rpmdevtools-7.5-1.el6.noarch already installed and latest version
Package sudo-1.7.4p5-13.el6_3.x86_64 already installed and latest version
Package 3:traceroute-2.0.14-2.el6.x86_64 already installed and latest version
Resolving Dependencies
--> Running transaction check
---> Package perl-Net-DNS.x86_64 0:0.65-4.el6 will be installed
---> Package rrdtool-python.x86_64 0:1.3.8-6.el6 will be installed
--> Processing Dependency: rrdtool = 1.3.8-6.el6 for package: rrdtool-python-1.3.8-6.el6.x86_64
--> Running transaction check
---> Package rrdtool.i686 0:1.3.8-6.el6 will be installed
--> Processing Dependency: libxml2.so.2(LIBXML2_2.4.30) for package: rrdtool-1.3.8-6.el6.i686
--> Processing Dependency: libxml2.so.2 for package: rrdtool-1.3.8-6.el6.i686
--> Processing Dependency: libpng12.so.0(PNG12_0) for package: rrdtool-1.3.8-6.el6.i686
--> Processing Dependency: libpng12.so.0 for package: rrdtool-1.3.8-6.el6.i686
--> Processing Dependency: libpangocairo-1.0.so.0 for package: rrdtool-1.3.8-6.el6.i686
--> Processing Dependency: libpango-1.0.so.0 for package: rrdtool-1.3.8-6.el6.i686
--> Processing Dependency: libgobject-2.0.so.0 for package: rrdtool-1.3.8-6.el6.i686
--> Processing Dependency: libgmodule-2.0.so.0 for package: rrdtool-1.3.8-6.el6.i686
--> Processing Dependency: libglib-2.0.so.0 for package: rrdtool-1.3.8-6.el6.i686
--> Processing Dependency: libcairo.so.2 for package: rrdtool-1.3.8-6.el6.i686
--> Running transaction check
---> Package cairo.i686 0:1.8.8-3.1.el6 will be installed
--> Processing Dependency: libz.so.1 for package: cairo-1.8.8-3.1.el6.i686
--> Processing Dependency: libpixman-1.so.0 for package: cairo-1.8.8-3.1.el6.i686
--> Processing Dependency: libfreetype.so.6 for package: cairo-1.8.8-3.1.el6.i686
--> Processing Dependency: libfontconfig.so.1 for package: cairo-1.8.8-3.1.el6.i686
--> Processing Dependency: libXrender.so.1 for package: cairo-1.8.8-3.1.el6.i686
---> Package glib2.i686 0:2.22.5-7.el6 will be installed
--> Processing Dependency: libselinux.so.1 for package: glib2-2.22.5-7.el6.i686
--> Processing Dependency: libfam.so.0 for package: glib2-2.22.5-7.el6.i686
---> Package libpng.i686 2:1.2.49-1.el6_2 will be installed
---> Package libxml2.i686 0:2.7.6-4.el6_2.4 will be installed
---> Package pango.i686 0:1.28.1-3.el6_0.5 will be installed
--> Processing Dependency: libthai.so.0(LIBTHAI_0.1) for package: pango-1.28.1-3.el6_0.5.i686
--> Processing Dependency: libthai.so.0 for package: pango-1.28.1-3.el6_0.5.i686
--> Processing Dependency: libXft.so.2 for package: pango-1.28.1-3.el6_0.5.i686
--> Running transaction check
---> Package fontconfig.i686 0:2.8.0-3.el6 will be installed
--> Processing Dependency: libexpat.so.1 for package: fontconfig-2.8.0-3.el6.i686
---> Package freetype.i686 0:2.3.11-6.el6_2.9 will be installed
---> Package gamin.i686 0:0.1.10-9.el6 will be installed
---> Package libXft.i686 0:2.1.13-4.1.el6 will be installed
---> Package libXrender.i686 0:0.9.5-1.el6 will be installed
---> Package libselinux.i686 0:2.0.94-5.3.el6 will be installed
---> Package libthai.i686 0:0.1.12-3.el6 will be installed
---> Package pixman.i686 0:0.18.4-1.el6_0.1 will be installed
---> Package zlib.i686 0:1.2.3-27.el6 will be installed
--> Running transaction check
---> Package expat.i686 0:2.0.1-11.el6_2 will be installed
--> Finished Dependency Resolution
Error: Protected multilib versions: rrdtool-1.3.8-6.el6.i686 != rrdtool-1.4.7-1.el6.rfx.x86_64
Error: Protected multilib versions: libxml2-2.7.6-4.el6_2.4.i686 != libxml2-2.7.6-5.el6.rfx.x86_64
You could try using --skip-broken to work around the problem


Intressting is both of the dependencies are related to the rrdtool.

regards Andy
Top
scottwilkerson
DevOps Engineer
Posts: 19396
Joined: Tue Nov 15, 2011 3:11 pm
Location: Nagios Enterprises
Contact:
Contact scottwilkerson

Re: Upgrade to 3.3 ?

Post by scottwilkerson »

Can you run the following and post the output

Code: Select all

yum info rrdtool-python
yum deplist rrdtool-python
yum info glib2
yum deplist glib2
Former Nagios employee
Creator:
Human Design Website
Get Your Human Design Chart
Top
User avatar
sikainfo
Posts: 105
Joined: Thu Mar 29, 2012 3:26 am

Re: Upgrade to 3.3 ?

Post by sikainfo »

since the output ist quite large i placed it in a text file.
You do not have the required permissions to view the files attached to this post.
Top
User avatar
sikainfo
Posts: 105
Joined: Thu Mar 29, 2012 3:26 am

Re: Upgrade to 3.3 ?

Post by sikainfo »

Hi Support,

Are here any news, or should I just wait and install X11 2012 ?
Top
mguthrie
Posts: 4380
Joined: Mon Jun 14, 2010 10:21 am

Re: Upgrade to 3.3 ?

Post by mguthrie »

I think this issue is best going to be resolved with a remote session. However due to time constraints for our world conference it might have to wait until next week. We'll just need to figure out how to switch a few packages to 64 bit, which can get a bit tricky because of conflicting repos and packages, so we'll probably just sort it out that way if that's alright with you. Please bug us early next week if we don't contact you first ;)
Top
User avatar
sikainfo
Posts: 105
Joined: Thu Mar 29, 2012 3:26 am

Re: Upgrade to 3.3 ?

Post by sikainfo »

That's fine for me, we just have to plan it a little bit. because of the timediffrence, that I can stay longer in the office at this day.

Thanks and regards

Andy
Top
scottwilkerson
DevOps Engineer
Posts: 19396
Joined: Tue Nov 15, 2011 3:11 pm
Location: Nagios Enterprises
Contact:
Contact scottwilkerson

Re: Upgrade to 3.3 ?

Post by scottwilkerson »

Sounds good, let us know with a support ticket to [email protected] to schedule a time.
Former Nagios employee
Creator:
Human Design Website
Get Your Human Design Chart
Top
Locked

Return to “Nagios XI”