I still have not been able to get a working Core Config Manager after a new install in RHEL 5.5 32b
NagiosXI appear to install OK, I can see the NagiosXI web page. When I select the Core Config Manager, it appears that the underlying d/base is empty ie: it was not populated during the install process.
Original email below was sent 4 days ago to Nagios - I have coloured the important bits:
=======================================================================================
Hi Fred,
In order for us to provide our customers with the best support, you need to post your questions to the customer support forum.
Regards,
Mary Starr
___
Nagios Enterprises, LLC
Email: [email protected]
Phone: (888)624-4671
Fax: (651)204-9103
Web: http://www.nagios.com
On 10/12/2010 7:07 PM, Kroeger, Fred wrote:
>
> Hi Mary - this was a response to the email of ongoing problems that
> Ethan& Tony have been investigating - pls forward to them.
>
> Thanks
>
> Fred Kroeger
>
> -----Original Message-----
> From: Mary Starr [mailto:[email protected]]
> Sent: Wednesday, 13 October 2010 06:04
> To: Kroeger, Fred
> Subject: Re: CCM problems
>
> Hi Fred,
>
> Please post your questions to the customer support forum. Thank you.
>
> Regards,
>
> Mary Starr
> ___
> Nagios Enterprises, LLC
> Email: [email protected]
> Phone: (888)624-4671
> Fax: (651)204-9103
> Web: http://www.nagios.com
>
>
>
> On 10/11/2010 9:52 PM, Kroeger, Fred wrote:
>> Hi
>>
>> I've done a complete re-install again and am still unable to install
>> NagiosXI correctly.
>> I'm not using a proxy and it still seems to fail when I run the
>> ./E-importnagiosql script.
>>
>> Can you compare what I see on my screen (below) compared to what you
>> get on a RHEL 5.5 install?
>> I am still concerned that the wget returns a 0 length file.
>> I have determined that this *only* happens with a .php file in the
>> http://localhost/nagiosql folder.
>> I can wget a .php file in any other http folder and I can wget any non
>
>> .php file in the nagiosql folder.
>>
>> I hope this is enough information for you to discover what my problem
>> is.
>>
>> Thanks& regards
>>
>> Fred Kroeger
>>
>>
>>
>> ======================================================================
>> ==
>> ======================
>> [root@lxfm201nag nagiosxi]# ./E-importnagiosql Starting httpd:
>> /tmp/nagiosxi/nagiosxi/basedir/scripts /tmp/nagiosxi
>> --2010-10-12 10:41:28-- http://localhost/nagiosql/index.php
>> Resolving localhost... 127.0.0.1
>> Connecting to localhost|127.0.0.1|:80... connected.
>> HTTP request sent, awaiting response... 200 OK
>> Length: 0 [text/html]
>> Saving to: `nagiosql.login'
>>
>> [<=>
>> ] 0 --.-K/s in 0s
>>
>> 2010-10-12 10:41:28 (0.00 B/s) - `nagiosql.login' saved [0/0]
>>
>> IMPORTING CONFIG FILES...Array
>> (
>> [0] => nagiosadmin.cfg
>> )
>> IMPORTING /usr/local/nagios/etc/import/nagiosadmin.cfg
>> CMDLINE:
>> /usr/bin/wget --load-cookies=nagiosql.cookies
>> http://localhost/nagiosql/admin/import.php --post-data
>> 'chbOverwrite=1&selImportFile[]=/usr/local/nagios/etc/import/nagiosadm
>> in
>> .cfg' -O nagiosql.import.monitoring
>> --2010-10-12 10:41:28-- http://localhost/nagiosql/admin/import.php
>> Resolving localhost... 127.0.0.1
>> Connecting to localhost|127.0.0.1|:80... connected.
>> HTTP request sent, awaiting response... 200 OK
>> Length: 0 [text/html]
>> Saving to: `nagiosql.import.monitoring'
>>
>> [<=>
>> ] 0 --.-K/s in 0s
>>
>> 2010-10-12 10:41:28 (0.00 B/s) - `nagiosql.import.monitoring' saved
>> [0/0]
>>
>> SETUID ROOT OK
>> RESETTING PERMS
>> --2010-10-12 10:41:29-- http://localhost/nagiosql/index.php
>> Resolving localhost... 127.0.0.1
>> Connecting to localhost|127.0.0.1|:80... connected.
>> HTTP request sent, awaiting response... 200 OK
>> Length: 0 [text/html]
>> Saving to: `nagiosql.login'
>>
>> [<=>
>> ] 0 --.-K/s in 0s
>>
>> 2010-10-12 10:41:29 (0.00 B/s) - `nagiosql.login' saved [0/0]
>>
>> CMDLINE:
>> /usr/bin/wget --load-cookies=nagiosql.cookies
>> http://localhost/nagiosql/admin/verify.php --post-data
>> 'writeMonitoring=Go' -O nagiosql.export.monitoring
>> --2010-10-12 10:41:29-- http://localhost/nagiosql/admin/verify.php
>> Resolving localhost... 127.0.0.1
>> Connecting to localhost|127.0.0.1|:80... connected.
>> HTTP request sent, awaiting response... 200 OK
>> Length: 0 [text/html]
>> Saving to: `nagiosql.export.monitoring'
>>
>> [<=>
>> ] 0 --.-K/s in 0s
>>
>> 2010-10-12 10:41:29 (0.00 B/s) - `nagiosql.export.monitoring' saved
>> [0/0]
>>
>> --2010-10-12 10:41:29-- http://localhost/nagiosql/admin/verify.php
>> Resolving localhost... 127.0.0.1
>> Connecting to localhost|127.0.0.1|:80... connected.
>> HTTP request sent, awaiting response... 200 OK
>> Length: 0 [text/html]
>> Saving to: `nagiosql.export.additional'
>>
>> [<=>
>> ] 0 --.-K/s in 0s
>>
>> 2010-10-12 10:41:29 (0.00 B/s) - `nagiosql.export.additional' saved
>> [0/0]
>>
>> CMDLINE:
>> /usr/bin/wget --load-cookies=nagiosql.cookies
>> http://localhost/nagiosql/admin/verify.php --post-data
>> 'writeAdditional=Go' -O nagiosql.export.additional
>> OUTPUT:
>> Nagios Core 3.2.2
>> Copyright (c) 2009-2010 Nagios Core Development Team and Community
>> Contributors Copyright (c) 1999-2009 Ethan Galstad Last Modified:
>> 09-01-2010
>> License: GPL
>>
>> Website: http://www.nagios.org
>> Reading configuration data...
>> Read main config file okay...
>> Processing object config directory '/usr/local/nagios/etc/static'...
>> Processing object config file
>> '/usr/local/nagios/etc/static/xiobjects.cfg'...
>> Processing object config file
>> '/usr/local/nagios/etc/static/xitemplates.cfg'...
>> Processing object config file
>> '/usr/local/nagios/etc/static/xitest.cfg'...
>> Processing object config file
>> '/usr/local/nagios/etc/contacttemplates.cfg'...
>> Error: Cannot open config file
>> '/usr/local/nagios/etc/contacttemplates.cfg' for reading: No such file
>
>> or directory
>> Error processing object config files!
>>
>>
>> ***> One or more problems was encountered while processing the config
>
>> files...
>>
>> Check your configuration file(s) to ensure that they contain
> valid
>> directives and data defintions. If you are upgrading from a
>> previous
>> version of Nagios, you should be aware that some
>> variables/definitions
>> may have been removed or modified in this version. Make sure to
>
>> read
>> the HTML documentation regarding the config files, as well as
> the
>> 'Whats New' section to find out what has changed.
>> RET: 254
>> /usr/local/nagiosxi/nom/checkpoints/nagioscore/errors
>> /tmp/nagiosxi/nagiosxi/basedir/scripts
>> tar: Removing leading `/' from member names
>> /tmp/nagiosxi/nagiosxi/basedir/scripts
>> ls: /usr/local/nagiosxi/nom/checkpoints/nagioscore/*.gz: No such file
>> or directory NO NOM SNAPSHOT FOUND!
>> /tmp/nagiosxi
>>
>> ======================================================================
>> == ========================================
>>
>> -----Original Message-----
>> From: Ethan Galstad [mailto:[email protected]]
>> Sent: Friday, 17 September 2010 00:59
>> To: Kroeger, Fred
>> Subject: Re: CCM problems
>>
>> Hi Fred -
>>
>> Here is what we discovered:
>>
>> 1. The reason you don't have access to email support is that your
>> original purchase of XI licenses didn't include email support - only
>> access to our customer support forum.
>>
>> 2. Tony tested a Nagios XI install on a clean RHEL 5.5 box and it
>> worked without problems.
>>
>> 3. It appears the issues you're having are related to the proxy you're
>
>> using. We can't provide support for proxy configuration with Nagios
>> XI, so the only recommendation we have is for you to disable the proxy
>
>> and use XI without it.
>>
>> The reason for this is that during normal operation the Nagios XI code
>
>> makes several internal HTTP calls to the local Nagios XI server to
>> import configuration data, apply configuration changes, process AJAX
>> requests, etc. These will likely break when you deploy a proxy,
>> resulting in a non-functional Nagios XI installation.
>>
>> Let us know if you can get XI working properly when the proxy is
>> disabled.
>>
>> Best regards,
>>
>>
>> Ethan Galstad
>> ___
>> Nagios Enterprises, LLC
>> Email: [email protected]
>> Phone: (888)624-4671
>> Fax: (651)204-9103
>> Web: http://www.nagios.com
>>
>>
>>
>> On 9/15/2010 8:12 PM, Kroeger, Fred wrote:
>>> My Customer Number: 31365
>>>
>>> Can you pls fix this again?
>>>
>>> Valid email addresses for support will be this one
>>>
>>> [email protected]
>>>
>>> AND
>>>
>>> [email protected]
>>>
>>>
>>>
>>> Fred Kroeger
>>> Systems Administrator - TSG
>>> InfoHEALTH
>>> Department of Health
>>> Level 6 - 67 Walters Drive
>>> OSBORNE PARK WA 6017
>>> Phone: +61 8 6213 5691
>>> E-mail: [email protected] The contents of this e-mail
>>> transmission are intended solely for the named recipient(s), may be
>>> confidential, and may be privileged or otherwise protected from
>>> disclosure in the public interest. The use, reproduction, disclosure
>>> or distribution of the contents of this e-mail transmission by any
>>> person other than the named recipient(s) is
>>
>>> prohibited. If you are not a named recipient please notify the sender
>
>>> immediately.
>>>
>>>
>>> -----Original Message-----
>>> From: [email protected]
>>> [mailto:[email protected]] On Behalf Of
>>> [email protected]
>>> Sent: Thursday, 16 September 2010 08:50
>>> To: Kroeger, Fred
>>> Subject: RE: CCM problems
>>>
>>> Important Note:
>>>
>>> Email support for Nagios XI is only available to customers with an
>>> active support/maintenance plan. Your email was automatically
>>> rejected because our system shows that you are not subscribed to a
>>> support/maintenance plan.
>>>
>>> Nagios XI Customers:
>>>
>>> If you are a Nagios XI customer with an active support/maintenance
>>> plan, please contact our sales team at [email protected] to gain
>>> access
>>
>>> to Nagios XI email support.
>>>
>>> Purchasing Support:
>>>
>>> You may obtain email support services for Nagios XI by purchasing or
>>> renewing your support/maintenance subscription online at:
>>>
>>> http://www.nagios.com/products/nagiosxi/pricing/buynow
>>>
>>
>
Ongoing CCM Problems
Re: Ongoing CCM Problems
Fred,
I'm unsure if there is/should be any data returned from the wget calls. However it's not for sure an error or even a warning for these to be blank. The intent is to push data into php, there is nothing done with the output.
Can you look and see if there are any errors on the php(apache error_log) side of things when these requests are made? We are still looking for something that definitely is causing you problems. Also check the apache access logs to make sure the requests are getting processed.
I'm not (un)convinced that there is something else going on here.
Now we have some suggestions for working with proxy server configurations in our FAQ, basically you need to configure the host/client so that localhost and 127.0.0.1 are not sent to the proxy. This bit depends on how your are configuring the proxy and that in-turn depends on what type of proxy you are using. As there are several types of proxy and for each proxy there are a number of ways to have it configured it's difficult for us to provide every one with detailed instructions. We certainly can take a look at the technology anyone is using to configure there proxy and advise a usable configuration example, also knowing about the proxy server could be helpful.
I'm unsure if there is/should be any data returned from the wget calls. However it's not for sure an error or even a warning for these to be blank. The intent is to push data into php, there is nothing done with the output.
Can you look and see if there are any errors on the php(apache error_log) side of things when these requests are made? We are still looking for something that definitely is causing you problems. Also check the apache access logs to make sure the requests are getting processed.
I'm not (un)convinced that there is something else going on here.
Now we have some suggestions for working with proxy server configurations in our FAQ, basically you need to configure the host/client so that localhost and 127.0.0.1 are not sent to the proxy. This bit depends on how your are configuring the proxy and that in-turn depends on what type of proxy you are using. As there are several types of proxy and for each proxy there are a number of ways to have it configured it's difficult for us to provide every one with detailed instructions. We certainly can take a look at the technology anyone is using to configure there proxy and advise a usable configuration example, also knowing about the proxy server could be helpful.
Re: Ongoing CCM Problems
Whatever problems I've got, they are consistent as this is now my 6th clean install in RHEL 5.5 and each time I seem to get problems with the importing of data. I'm not sure that the proxy connection is a problem. I only point to the proxy for the 0-yum (new version) and 1-prereqs.
In fact I have changed the 1-prereq so that it does a wget of the external rpms and then does a rpm install using the local file. From that point on , there is no proxy connection defined.
When I run the E-importnagiosql script I don't get any apache errors and there is a corresponding entry in the access log to show that it did connect OK.
127.0.0.1 - - [18/Oct/2010:08:12:22 +0800] "POST /nagiosql/admin/import.php HTTP/1.0" 200 - "-" "Wget/1.11.4 Red Hat modified"
127.0.0.1 - - [18/Oct/2010:08:12:22 +0800] "POST /nagiosql/index.php HTTP/1.0" 200 - "-" "Wget/1.11.4 Red Hat modified"
127.0.0.1 - - [18/Oct/2010:08:12:22 +0800] "POST /nagiosql/admin/verify.php HTTP/1.0" 200 - "-" "Wget/1.11.4 Red Hat modified"
127.0.0.1 - - [18/Oct/2010:08:12:22 +0800] "POST /nagiosql/admin/verify.php HTTP/1.0" 200 - "-" "Wget/1.11.4 Red Hat modified"
I tried running the sql command that Tony sent me to check the d/base and the command syntax he sent won't work on my system:
# mysql -u root -p nagiosxi
mysql> USE nagiosql;
I found that it was still prompting for a password and was using the password field as a d/base name - so I changed the command to:
# mysql -u root -p
mysql> USE nagiosql;
That connects OK when I enter the password:
I then run the query Tony sent and find there is nothing there:
mysql> SELECT config_name, service_description, check_command FROM tbl_service;
Empty set (0.00 sec)
So... assuming that everything has installed OK - how can I import the setup info into the d/base manually apart from using E-importnagiosql which is not working?
regards... Fred
In fact I have changed the 1-prereq so that it does a wget of the external rpms and then does a rpm install using the local file. From that point on , there is no proxy connection defined.
When I run the E-importnagiosql script I don't get any apache errors and there is a corresponding entry in the access log to show that it did connect OK.
127.0.0.1 - - [18/Oct/2010:08:12:22 +0800] "POST /nagiosql/admin/import.php HTTP/1.0" 200 - "-" "Wget/1.11.4 Red Hat modified"
127.0.0.1 - - [18/Oct/2010:08:12:22 +0800] "POST /nagiosql/index.php HTTP/1.0" 200 - "-" "Wget/1.11.4 Red Hat modified"
127.0.0.1 - - [18/Oct/2010:08:12:22 +0800] "POST /nagiosql/admin/verify.php HTTP/1.0" 200 - "-" "Wget/1.11.4 Red Hat modified"
127.0.0.1 - - [18/Oct/2010:08:12:22 +0800] "POST /nagiosql/admin/verify.php HTTP/1.0" 200 - "-" "Wget/1.11.4 Red Hat modified"
I tried running the sql command that Tony sent me to check the d/base and the command syntax he sent won't work on my system:
# mysql -u root -p nagiosxi
mysql> USE nagiosql;
I found that it was still prompting for a password and was using the password field as a d/base name - so I changed the command to:
# mysql -u root -p
mysql> USE nagiosql;
That connects OK when I enter the password:
I then run the query Tony sent and find there is nothing there:
mysql> SELECT config_name, service_description, check_command FROM tbl_service;
Empty set (0.00 sec)
So... assuming that everything has installed OK - how can I import the setup info into the d/base manually apart from using E-importnagiosql which is not working?
regards... Fred
Re: Ongoing CCM Problems
There must be no space between -p or --password= and the password following it.
If you have corrections for E-importnagiosql we would be happy to review them. You can get started by debugging scripts with bash's -x flag. Like so: The script contains the list of commands to be used to import the setup info into the d/base manually and you may use them as our instructions for doing so.
If you have corrections for E-importnagiosql we would be happy to review them. You can get started by debugging scripts with bash's -x flag. Like so:
Code: Select all
( set -x; . ./E-importnagiosql; )Re: Ongoing CCM Problems
No errors displayed when I run the E-importnagiosql script
Code: Select all
[root@lxfm201nag nagiosxi]# (set -x; . ./E-importnagiosql ;)
+ . ./E-importnagiosql
++ source ./init.sh
+++ prodname='Nagios XI'
+++ proddir=/usr/local/nagiosxi
+++ httpdconfdir=/etc/httpd/conf.d
+++ nagiosuser=nagios
+++ nagiosgroup=nagios
+++ nagioscmdgroup=nagcmd
+++ apacheuser=apache
+++ useraddbin=/usr/sbin/useradd
+++ groupaddbin=/usr/sbin/groupadd
+++ usermodbin=/usr/sbin/usermod
+++ mkdirbin=/bin/mkdir
+++ chownbin=/bin/chown
+++ servicebin=/sbin/service
+++ htpasswdbin=/usr/bin/htpasswd
+++ nagioswebuser=nagiosadmin
+++ nagioswebpwd=nagiosadmin
+++ mysqlpass=nagiosxi
++ /etc/init.d/httpd start
Starting httpd:
++ cp -i subcomponents/nagioscore/mods/cfg/fixes/nagiosadmin.cfg /usr/local/nagios/etc/import
++ pushd nagiosxi/basedir/scripts
/tmp/nagiosxi/nagiosxi/basedir/scripts /tmp/nagiosxi
++ ./reconfigure_nagios.sh
--2010-10-19 08:15:38-- http://localhost/nagiosql/index.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.login'
[ <=> ] 0 --.-K/s in 0s
2010-10-19 08:15:38 (0.00 B/s) - `nagiosql.login' saved [0/0]
IMPORTING CONFIG FILES...Array
(
[0] => nagiosadmin.cfg
)
IMPORTING /usr/local/nagios/etc/import/nagiosadmin.cfg
CMDLINE:
/usr/bin/wget --load-cookies=nagiosql.cookies http://localhost/nagiosql/admin/import.php --post-data 'chbOverwrite=1&selImportFile[]=/usr/local/nagios/etc/import/nagiosadmin.cfg' -O nagiosql.import.monitoring
--2010-10-19 08:15:38-- http://localhost/nagiosql/admin/import.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.import.monitoring'
[ <=> ] 0 --.-K/s in 0s
2010-10-19 08:15:38 (0.00 B/s) - `nagiosql.import.monitoring' saved [0/0]
SETUID ROOT OK
RESETTING PERMS
--2010-10-19 08:15:38-- http://localhost/nagiosql/index.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.login'
[ <=> ] 0 --.-K/s in 0s
2010-10-19 08:15:38 (0.00 B/s) - `nagiosql.login' saved [0/0]
CMDLINE:
/usr/bin/wget --load-cookies=nagiosql.cookies http://localhost/nagiosql/admin/verify.php --post-data 'writeMonitoring=Go' -O nagiosql.export.monitoring
--2010-10-19 08:15:39-- http://localhost/nagiosql/admin/verify.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.export.monitoring'
[ <=> ] 0 --.-K/s in 0s
2010-10-19 08:15:39 (0.00 B/s) - `nagiosql.export.monitoring' saved [0/0]
--2010-10-19 08:15:39-- http://localhost/nagiosql/admin/verify.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.export.additional'
[ <=> ] 0 --.-K/s in 0s
2010-10-19 08:15:39 (0.00 B/s) - `nagiosql.export.additional' saved [0/0]
CMDLINE:
/usr/bin/wget --load-cookies=nagiosql.cookies http://localhost/nagiosql/admin/verify.php --post-data 'writeAdditional=Go' -O nagiosql.export.additional
OUTPUT:
Nagios Core 3.2.2
Copyright (c) 2009-2010 Nagios Core Development Team and Community Contributors
Copyright (c) 1999-2009 Ethan Galstad
Last Modified: 09-01-2010
License: GPL
Website: http://www.nagios.org
Reading configuration data...
Read main config file okay...
Processing object config directory '/usr/local/nagios/etc/hosts'...
Processing object config directory '/usr/local/nagios/etc/services'...
Read object config files okay...
Running pre-flight check on configuration data...
Checking services...
Error: There are no services defined!
Checked 0 services.
Checking hosts...
Error: There are no hosts defined!
Checked 0 hosts.
Checking host groups...
Checked 0 host groups.
Checking service groups...
Checked 0 service groups.
Checking contacts...
Error: There are no contacts defined!
Checked 0 contacts.
Checking contact groups...
Checked 0 contact groups.
Checking service escalations...
Checked 0 service escalations.
Checking service dependencies...
Checked 0 service dependencies.
Checking host escalations...
Checked 0 host escalations.
Checking host dependencies...
Checked 0 host dependencies.
Checking commands...
Checked 0 commands.
Checking time periods...
Checked 0 time periods.
Checking for circular paths between hosts...
Checking for circular host and service dependencies...
Checking global event handlers...
Checking obsessive compulsive processor commands...
Checking misc settings...
Total Warnings: 0
Total Errors: 3
***> One or more problems was encountered while running the pre-flight check...
Check your configuration file(s) to ensure that they contain valid
directives and data defintions. If you are upgrading from a previous
version of Nagios, you should be aware that some variables/definitions
may have been removed or modified in this version. Make sure to read
the HTML documentation regarding the config files, as well as the
'Whats New' section to find out what has changed.
RET: 254
/usr/local/nagiosxi/nom/checkpoints/nagioscore/errors /tmp/nagiosxi/nagiosxi/basedir/scripts
tar: Removing leading `/' from member names
/tmp/nagiosxi/nagiosxi/basedir/scripts
ls: /usr/local/nagiosxi/nom/checkpoints/nagioscore/*.gz: No such file or directory
NO NOM SNAPSHOT FOUND!
++ popd
/tmp/nagiosxiRe: Ongoing CCM Problems
Do you have "MySQL-Server" or "mysql" package installed?
We depend on "mysql", for the moment(today Oct 19th 2010).
I'm working on another system just now, not having the same problem as you.
These instructions don't fully address using proxys, in perticular they neglect to even mention a handfull of proxy client software/configuration avalible, like tsocs or using well known http_proxy/no_proxy environment variables.
http://support.nagios.com/wiki/index.ph ... th_Proxies
Though the above should be helpfull.
We depend on "mysql", for the moment(today Oct 19th 2010).
I'm working on another system just now, not having the same problem as you.
These instructions don't fully address using proxys, in perticular they neglect to even mention a handfull of proxy client software/configuration avalible, like tsocs or using well known http_proxy/no_proxy environment variables.
http://support.nagios.com/wiki/index.ph ... th_Proxies
Though the above should be helpfull.
Re: Ongoing CCM Problems
Packages installed are the standard RedHat packages plus any others that the NagiosXI application scripts installs
Code: Select all
[root@lxfm201nag ~]# yum list | grep sql
This system is not registered with RHN.
RHN support will be disabled.
mysql.i386 5.0.77-4.el5_5.3 installed
mysql-devel.i386 5.0.77-4.el5_5.3 installed
mysql-server.i386 5.0.77-4.el5_5.3 installed
php-mssql.i386 5.1.6-5.el5 installed
php-mysql.i386 5.1.6-27.el5 installed
php-pgsql.i386 5.1.6-27.el5 installed
postgresql.i386 8.1.21-1.el5_5.1 installed
postgresql-devel.i386 8.1.21-1.el5_5.1 installed
postgresql-libs.i386 8.1.21-1.el5_5.1 installed
postgresql-server.i386 8.1.21-1.el5_5.1 installed
python-sqlite.i386 1.1.7-1.2.1 installed
sqlite.i386 3.3.6-5 installed
sqlite-devel.i386 3.3.6-5 installed
Re: Ongoing CCM Problems
Looks like this script is working fine, it's the NagiosQL part that's not being performed properly. Back up and try to get NagiosQL setup and configured properly, that is the error lies in an earlier step. As suggested something with mysql.
Can you enlighten us as to how you configured your proxy and it's configuration? We may wish to include it in our documentation.
Can you enlighten us as to how you configured your proxy and it's configuration? We may wish to include it in our documentation.
Re: Ongoing CCM Problems
Hi - I have rebuilt the RHEL5.5 server from scratch again to ensure no leftover files from previous install attempts were muddying the waters.
I have modified the yum.conf & wgetrc files as per your document for using proxies. Again, this all appears OK - I can wget your nagiosxi install file and yum is getting the files OK from net via the proxy. After the install process, I am back to the same issue where the Core Config Manager screen is blank - if I select any of the options in Monitoring or Alerting , the screen remains blank.
If I select Import or Write Config files under tools, The screen updates, but I don't get any output to indicate if it worked or failed.
I am including the output from various install steps below that report some type of error. Hopefully it is enough for you to figure out what is going wrong.
1-prereqs - This is the ouput from the second time I ran it - to make sure that everything and all dependencies had been installed.
The only problems I can see is that there is no perl-CPAN or pear.php.net/HTML_Template_IT packages found.
3-dbservers
11-sourceguardian
B-installxi
E-importnagiosql
I have modified the yum.conf & wgetrc files as per your document for using proxies. Again, this all appears OK - I can wget your nagiosxi install file and yum is getting the files OK from net via the proxy. After the install process, I am back to the same issue where the Core Config Manager screen is blank - if I select any of the options in Monitoring or Alerting , the screen remains blank.
If I select Import or Write Config files under tools, The screen updates, but I don't get any output to indicate if it worked or failed.
I am including the output from various install steps below that report some type of error. Hopefully it is enough for you to figure out what is going wrong.
1-prereqs - This is the ouput from the second time I ran it - to make sure that everything and all dependencies had been installed.
The only problems I can see is that there is no perl-CPAN or pear.php.net/HTML_Template_IT packages found.
Code: Select all
This system is not registered with RHN.
RHN support will be disabled.
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package rpmdevtools-6.8-1.el5.noarch already installed and latest version
Nothing to do
--2010-10-22 10:51:19-- http://libslack.org/daemon/download/daemon-0.6.3-1.i386.rpm
Resolving proxyserver.health.wa.gov.au... 203.0.172.70
Connecting to proxyserver.health.wa.gov.au|203.0.172.70|:8181... connected.
Proxy request sent, awaiting response... 200 OK
Length: 58769 (57K) [application/x-redhat-package-manager]
Saving to: `daemon-0.6.3-1.i386.rpm.4'
0K .......... .......... .......... .......... .......... 87% 6.77M 0s
50K ....... 100% 13.1M=0.008s
2010-10-22 10:51:19 (7.21 MB/s) - `daemon-0.6.3-1.i386.rpm.4' saved [58769/58769]
package daemon-0.6.3-1.i386 is already installed
Installing prerequisites...
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
[color=#FF0000]No package perl-CPAN available.[/color]
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package 4:perl-5.8.8-32.el5_5.2.i386 already installed and latest version
Package 1:make-3.81-3.el5.i386 already installed and latest version
Package sysstat-7.0.2-3.el5_5.1.i386 already installed and latest version
Package httpd-2.2.3-43.el5_5.3.i386 already installed and latest version
Package php-5.1.6-27.el5.i386 already installed and latest version
Package gcc-4.1.2-48.el5.i386 already installed and latest version
Package glibc-2.5-49.el5_5.4.i686 already installed and latest version
Package glibc-common-2.5-49.el5_5.4.i386 already installed and latest version
Package gd-2.0.33-9.4.el5_4.2.i386 already installed and latest version
Package gd-devel-2.0.33-9.4.el5_4.2.i386 already installed and latest version
Package mysql-5.0.77-4.el5_5.3.i386 already installed and latest version
Package mysql-server-5.0.77-4.el5_5.3.i386 already installed and latest version
Package mysql-devel-5.0.77-4.el5_5.3.i386 already installed and latest version
Package 1:net-snmp-5.3.2.2-9.el5_5.1.i386 already installed and latest version
Package 1:net-snmp-libs-5.3.2.2-9.el5_5.1.i386 already installed and latest version
Package 1:net-snmp-utils-5.3.2.2-9.el5_5.1.i386 already installed and latest version
Package libmcrypt-2.5.7-5.el5.i386 already installed and latest version
Package libmcrypt-devel-2.5.7-5.el5.i386 already installed and latest version
Package dstat-0.6.6-3.el5_4.1.noarch already installed and latest version
Package rrdtool-1.2.27-3.el5.i386 already installed and latest version
Package php-5.1.6-27.el5.i386 already installed and latest version
Package php-mysql-5.1.6-27.el5.i386 already installed and latest version
Package 2:xinetd-2.3.14-10.el5.i386 already installed and latest version
Package php-gd-5.1.6-27.el5.i386 already installed and latest version
Package unzip-5.52-3.el5.i386 already installed and latest version
Package 2:nmap-4.11-1.1.i386 already installed and latest version
Package 1:php-pear-1.4.9-6.el5.noarch already installed and latest version
Package 30:bind-utils-9.3.6-4.P1.el5_4.2.i386 already installed and latest version
Package openldap-2.3.43-12.el5_5.2.i386 already installed and latest version
Package openldap-devel-2.3.43-12.el5_5.2.i386 already installed and latest version
Package fping-2.4b2-7.el5.i386 already installed and latest version
Package mrtg-2.14.5-2.i386 already installed and latest version
Package postgresql-8.1.21-1.el5_5.1.i386 already installed and latest version
Package postgresql-libs-8.1.21-1.el5_5.1.i386 already installed and latest version
Package postgresql-server-8.1.21-1.el5_5.1.i386 already installed and latest version
Package php-pgsql-5.1.6-27.el5.i386 already installed and latest version
Package postgresql-devel-8.1.21-1.el5_5.1.i386 already installed and latest version
Package perl-Net-SNMP-5.2.0-1.el5.1.noarch already installed and latest version
Package php-mcrypt-5.1.6-5.el5.i386 already installed and latest version
Package cacti-0.8.7f-1.el5.noarch already installed and latest version
Package php-snmp-5.1.6-27.el5.i386 already installed and latest version
Package expat-devel-1.95.8-8.3.el5_5.3.i386 already installed and latest version
Package graphviz-2.12-8.el5.i386 already installed and latest version
Package freetds-0.64-6.el5.i386 already installed and latest version
Package freetds-devel-0.64-6.el5.i386 already installed and latest version
Package unixODBC-2.2.11-7.1.i386 already installed and latest version
Package unixODBC-devel-2.2.11-7.1.i386 already installed and latest version
Package php-odbc-5.1.6-27.el5.i386 already installed and latest version
Package php-mssql-5.1.6-5.el5.i386 already installed and latest version
Package openssl-0.9.8e-12.el5_4.6.i686 already installed and latest version
Package openssl-devel-0.9.8e-12.el5_4.6.i386 already installed and latest version
Package unzip-5.52-3.el5.i386 already installed and latest version
Package rpmdevtools-6.8-1.el5.noarch already installed and latest version
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package phpMyAdmin-2.11.10.1-1.el5.noarch already installed and latest version
Nothing to do
[color=#FF0000]No releases available for package "pear.php.net/HTML_Template_IT"
Cannot initialize 'HTML_Template_IT', invalid or missing package file
Package "HTML_Template_IT" is not valid
install failed[/color]
Some packages will fail to install, this is normal.
This system is not registered with RHN.
RHN support will be disabled.
These are equal
These are equal
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-libwww-perl-5.805-1.1.1.noarch already installed and latest version
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-libwww-perl-5.805-1.1.1.noarch already installed and latest version
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-libwww-perl-5.805-1.1.1.noarch already installed and latest version
Nothing to do
Some packages will fail to install, this is normal.
This system is not registered with RHN.
RHN support will be disabled.
0:perl-libwww-perl-5.805-1.1.1.noarch is newer
0:perl-libwww-perl-5.805-1.1.1.noarch is newer
These are equal
These are equal
0:perl-libwww-perl-5.805-1.1.1.noarch is newer
0:perl-libwww-perl-5.805-1.1.1.noarch is newer
These are equal
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching mod_perl-2.0.2-6.3.el5.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching mod_perl-2.0.2-6.3.el5.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-libwww-perl-5.805-1.1.1.noarch already installed and latest version
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-libwww-perl-5.805-1.1.1.noarch already installed and latest version
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-libwww-perl-5.805-1.1.1.noarch already installed and latest version
Nothing to do
Some packages will fail to install, this is normal.
This system is not registered with RHN.
RHN support will be disabled.
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-18.el5_3.1.i386 is newer
4:perl-5.8.8-27.el5.i386 is newer
4:perl-5.8.8-27.el5.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-32.el5_5.1.i386 is newer
4:perl-5.8.8-32.el5_5.1.i386 is newer
4:perl-5.8.8-32.el5_5.1.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-10.i386 is newer
4:perl-5.8.8-18.el5_3.1.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
These are equal
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching 4:perl-5.8.8-10.el5_2.3.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching 4:perl-5.8.8-10.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching 4:perl-5.8.8-18.el5_3.1.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching 4:perl-5.8.8-27.el5.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching 4:perl-5.8.8-32.el5_5.1.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package 4:perl-5.8.8-32.el5_5.2.i386 already installed and latest version
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package 4:perl-5.8.8-32.el5_5.2.i386 already installed and latest version
Nothing to do
Some packages will fail to install, this is normal.
This system is not registered with RHN.
RHN support will be disabled.
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-18.el5_3.1.i386 is newer
4:perl-5.8.8-27.el5.i386 is newer
4:perl-5.8.8-27.el5.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-32.el5_5.1.i386 is newer
4:perl-5.8.8-32.el5_5.1.i386 is newer
4:perl-5.8.8-32.el5_5.1.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-10.i386 is newer
4:perl-5.8.8-18.el5_3.1.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
These are equal
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching 4:perl-5.8.8-10.el5_2.3.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching 4:perl-5.8.8-10.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching 4:perl-5.8.8-18.el5_3.1.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching 4:perl-5.8.8-27.el5.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching 4:perl-5.8.8-32.el5_5.1.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package 4:perl-5.8.8-32.el5_5.2.i386 already installed and latest version
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package 4:perl-5.8.8-32.el5_5.2.i386 already installed and latest version
Nothing to do
Some packages will fail to install, this is normal.
This system is not registered with RHN.
RHN support will be disabled.
These are equal
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package 1:perl-Error-0.17010-1.el5.noarch already installed and latest version
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package 1:perl-Error-0.17010-1.el5.noarch already installed and latest version
Nothing to do
Some packages will fail to install, this is normal.
This system is not registered with RHN.
RHN support will be disabled.
These are equal
These are equal
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-Crypt-SSLeay-0.51-11.el5.i386 already installed and latest version
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-Crypt-SSLeay-0.51-11.el5.i386 already installed and latest version
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-Crypt-SSLeay-0.51-11.el5.i386 already installed and latest version
Nothing to do
Some packages will fail to install, this is normal.
This system is not registered with RHN.
RHN support will be disabled.
These are equal
These are equal
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-XML-Simple-2.14-4.fc6.noarch already installed and latest version
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-XML-Simple-2.14-4.fc6.noarch already installed and latest version
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-XML-Simple-2.14-4.fc6.noarch already installed and latest version
Nothing to do
Some packages will fail to install, this is normal.
This system is not registered with RHN.
RHN support will be disabled.
These are equal
These are equal
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-XML-Parser-2.34-6.1.2.2.1.i386 already installed and latest version
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-XML-Parser-2.34-6.1.2.2.1.i386 already installed and latest version
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-XML-Parser-2.34-6.1.2.2.1.i386 already installed and latest version
Nothing to do
Some packages will fail to install, this is normal.
This system is not registered with RHN.
RHN support will be disabled.
0:perl-DBD-MySQL-3.0007-2.el5.i386 is newer
These are equal
0:perl-DBD-MySQL-3.0007-2.el5.i386 is newer
0:perl-DBD-MySQL-3.0007-2.el5.i386 is newer
These are equal
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching perl-DBD-MySQL-3.0007-1.fc6.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching perl-DBD-MySQL-3.0007-1.fc6.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-DBD-MySQL-3.0007-2.el5.i386 already installed and latest version
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package perl-DBD-MySQL-3.0007-2.el5.i386 already installed and latest version
Nothing to do
Some packages will fail to install, this is normal.
This system is not registered with RHN.
RHN support will be disabled.
Warning: 3.0.x versions of yum would erroneously match against filenames.
You can use "*/perl(DBD::ODBC)" and/or "*bin/perl(DBD::ODBC)" to get that behaviour
Some packages will fail to install, this is normal.
This system is not registered with RHN.
RHN support will be disabled.
Warning: 3.0.x versions of yum would erroneously match against filenames.
You can use "*/perl(Mail::POP3Client)" and/or "*bin/perl(Mail::POP3Client)" to get that behaviour
Some packages will fail to install, this is normal.
This system is not registered with RHN.
RHN support will be disabled.
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-18.el5_3.1.i386 is newer
4:perl-5.8.8-27.el5.i386 is newer
4:perl-5.8.8-27.el5.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-32.el5_5.1.i386 is newer
4:perl-5.8.8-32.el5_5.1.i386 is newer
4:perl-5.8.8-32.el5_5.1.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-10.i386 is newer
4:perl-5.8.8-18.el5_3.1.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
4:perl-5.8.8-32.el5_5.2.i386 is newer
These are equal
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching 4:perl-5.8.8-10.el5_2.3.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching 4:perl-5.8.8-10.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching 4:perl-5.8.8-18.el5_3.1.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching 4:perl-5.8.8-27.el5.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package matching 4:perl-5.8.8-32.el5_5.1.i386 already installed. Checking for update.
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package 4:perl-5.8.8-32.el5_5.2.i386 already installed and latest version
Nothing to do
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Package 4:perl-5.8.8-32.el5_5.2.i386 already installed and latest version
Nothing to do
Some packages will fail to install, this is normal.
This system is not registered with RHN.
RHN support will be disabled.
Warning: 3.0.x versions of yum would erroneously match against filenames.
You can use "*/perl(Net::SMTP::TLS)" and/or "*bin/perl(Net::SMTP::TLS)" to get that behaviour
Some packages will fail to install, this is normal.
This system is not registered with RHN.
RHN support will be disabled.
Warning: 3.0.x versions of yum would erroneously match against filenames.
You can use "*/perl(DBD::Sybase)" and/or "*bin/perl(DBD::Sybase)" to get that behaviour
Code: Select all
Initializing PostgresQL...
Usage: /etc/init.d/postgresql {start|stop|status|restart|condrestart|condstop|reload|force-reload}
Starting PostgresQL...
Initializing database: [ OK ]
Starting postgresql service: [ OK ]
Restarting PostgresQL...
Stopping postgresql service: [ OK ]
Starting postgresql service: [ OK ]
Starting MySQL...
Initializing MySQL database: Installing MySQL system tables...
101022 11:03:33 [Warning] option 'max_join_size': unsigned value 18446744073709551615 adjusted to 4294967295
101022 11:03:33 [Warning] option 'max_join_size': unsigned value 18446744073709551615 adjusted to 4294967295
OK
Filling help tables...
101022 11:03:33 [Warning] option 'max_join_size': unsigned value 18446744073709551615 adjusted to 4294967295
101022 11:03:33 [Warning] option 'max_join_size': unsigned value 18446744073709551615 adjusted to 4294967295
OK
To start mysqld at boot time you have to copy
support-files/mysql.server to the right place for your system
PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
To do so, start the server, then issue the following commands:
/usr/bin/mysqladmin -u root password 'new-password'
/usr/bin/mysqladmin -u root -h lxfm201nag.hdwa.health.wa.gov.au password 'new-password'
Alternatively you can run:
/usr/bin/mysql_secure_installation
which will also give you the option of removing the test
databases and anonymous user created by default. This is
strongly recommended for production servers.
See the manual for more instructions.
You can start the MySQL daemon with:
cd /usr ; /usr/bin/mysqld_safe &
You can test the MySQL daemon with mysql-test-run.pl
cd mysql-test ; perl mysql-test-run.pl
Please report any problems with the /usr/bin/mysqlbug script!
The latest information about MySQL is available on the web at
http://www.mysql.com
Support MySQL by buying support/licenses at http://shop.mysql.com
[ OK ]
Starting MySQL: [ OK ]
Setting MySQL root password...
MySQL root password set to: nagiosxi
Code: Select all
Archive: sourceguardian/ixed4.lin.x86-32.zip
inflating: /usr/lib/php/modules/ixed.4.3.lin
inflating: /usr/lib/php/modules/ixed.4.3ts.lin
inflating: /usr/lib/php/modules/ixed.4.4.lin
inflating: /usr/lib/php/modules/ixed.4.4ts.lin
inflating: /usr/lib/php/modules/ixed.5.0.0.lin
inflating: /usr/lib/php/modules/ixed.5.0.0ts.lin
inflating: /usr/lib/php/modules/ixed.5.0.1.lin
inflating: /usr/lib/php/modules/ixed.5.0.1ts.lin
inflating: /usr/lib/php/modules/ixed.5.0.2.lin
inflating: /usr/lib/php/modules/ixed.5.0.2ts.lin
inflating: /usr/lib/php/modules/ixed.5.0.lin
inflating: /usr/lib/php/modules/ixed.5.0ts.lin
inflating: /usr/lib/php/modules/ixed.5.1.lin
inflating: /usr/lib/php/modules/ixed.5.1ts.lin
inflating: /usr/lib/php/modules/ixed.5.2.lin
inflating: /usr/lib/php/modules/ixed.5.2ts.lin
inflating: /usr/lib/php/modules/ixed.5.3.lin
inflating: /usr/lib/php/modules/ixed.5.3ts.lin
Sourceguardian extension found for PHP version 5.1
Adding Sourceguardian extension to php.ini
Stopping httpd: [ OK ]
Starting httpd: [ OK ]
Stopping httpd: [FAILED]
Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
[FAILED]
Installed SourceGuardian loaders
Code: Select all
Creating product directory...
Adding password for user nagiosadmin
CREATE ROLE
CREATE DATABASE
Stopping postgresql service: [ OK ]
Starting postgresql service: [ OK ]
SET
ERROR: parameter "standard_conforming_strings" cannot be changed
SET
SET
SET
ERROR: must be owner of schema public
SET
CREATE SEQUENCE
ALTER TABLE
CREATE SEQUENCE
ALTER TABLE
CREATE SEQUENCE
ALTER TABLE
CREATE SEQUENCE
ALTER TABLE
CREATE SEQUENCE
ALTER TABLE
CREATE SEQUENCE
ALTER TABLE
CREATE SEQUENCE
ALTER TABLE
SET
SET
CREATE TABLE
ALTER TABLE
CREATE TABLE
ALTER TABLE
CREATE SEQUENCE
ALTER TABLE
CREATE SEQUENCE
ALTER TABLE
CREATE TABLE
ALTER TABLE
CREATE SEQUENCE
ALTER TABLE
CREATE TABLE
ALTER TABLE
CREATE SEQUENCE
ALTER TABLE
CREATE TABLE
ALTER TABLE
CREATE SEQUENCE
ALTER TABLE
CREATE TABLE
ALTER TABLE
CREATE SEQUENCE
ALTER TABLE
CREATE TABLE
ALTER TABLE
ALTER TABLE
ALTER TABLE
ALTER TABLE
ALTER TABLE
ALTER TABLE
ALTER TABLE
ALTER TABLE
ALTER TABLE
ALTER TABLE
ALTER TABLE
CREATE INDEX
CREATE INDEX
CREATE INDEX
CREATE INDEX
CREATE INDEX
CREATE INDEX
CREATE INDEX
CREATE INDEX
WARNING: no privileges could be revoked
REVOKE
WARNING: no privileges could be revoked
REVOKE
WARNING: no privileges were granted
GRANT
WARNING: no privileges were granted
GRANT
SET
ERROR: parameter "standard_conforming_strings" cannot be changed
SET
SET
SET
SET
setval
--------
20
(1 row)
setval
--------
16
(1 row)
setval
--------
25
(1 row)
setval
--------
15
(1 row)
setval
--------
14
(1 row)
setval
--------
142
(1 row)
setval
--------
53
(1 row)
setval
--------
21
(1 row)
setval
--------
33
(1 row)
setval
--------
28
(1 row)
setval
--------
170
(1 row)
setval
--------
25
(1 row)
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
INSERT 0 1
You can usually ignore SQL import error/warning messages.
Step completed.
Code: Select all
Starting httpd:
/tmp/nagiosxi/nagiosxi/basedir/scripts /tmp/nagiosxi
--2010-10-22 11:13:48-- http://localhost/nagiosql/index.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.login'
0K 0.00 =0s
2010-10-22 11:13:48 (0.00 B/s) - `nagiosql.login' saved [0/0]
IMPORTING CONFIG FILES...Array
(
[0] => commands.cfg
[1] => contacts.cfg
[2] => localhost.cfg
[3] => nagiosadmin.cfg
[4] => templates.cfg
[5] => timeperiods.cfg
[6] => xicommands.cfg
[7] => xiobjects.cfg
[8] => xitemplates.cfg
[9] => xiwzardtemplates.cfg
)
IMPORTING /usr/local/nagios/etc/import/commands.cfg
CMDLINE:
/usr/bin/wget --load-cookies=nagiosql.cookies http://localhost/nagiosql/admin/import.php --post-data 'chbOverwrite=1&selImportFile[]=/usr/local/nagios/etc/import/commands.cfg' -O nagiosql.import.monitoring
--2010-10-22 11:13:48-- http://localhost/nagiosql/admin/import.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.import.monitoring'
0K 0.00 =0s
2010-10-22 11:13:48 (0.00 B/s) - `nagiosql.import.monitoring' saved [0/0]
IMPORTING /usr/local/nagios/etc/import/contacts.cfg
CMDLINE:
/usr/bin/wget --load-cookies=nagiosql.cookies http://localhost/nagiosql/admin/import.php --post-data 'chbOverwrite=1&selImportFile[]=/usr/local/nagios/etc/import/contacts.cfg' -O nagiosql.import.monitoring
--2010-10-22 11:13:48-- http://localhost/nagiosql/admin/import.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.import.monitoring'
0K 0.00 =0s
2010-10-22 11:13:48 (0.00 B/s) - `nagiosql.import.monitoring' saved [0/0]
IMPORTING /usr/local/nagios/etc/import/localhost.cfg
CMDLINE:
/usr/bin/wget --load-cookies=nagiosql.cookies http://localhost/nagiosql/admin/import.php --post-data 'chbOverwrite=1&selImportFile[]=/usr/local/nagios/etc/import/localhost.cfg' -O nagiosql.import.monitoring
--2010-10-22 11:13:48-- http://localhost/nagiosql/admin/import.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.import.monitoring'
0K 0.00 =0s
2010-10-22 11:13:48 (0.00 B/s) - `nagiosql.import.monitoring' saved [0/0]
IMPORTING /usr/local/nagios/etc/import/nagiosadmin.cfg
CMDLINE:
/usr/bin/wget --load-cookies=nagiosql.cookies http://localhost/nagiosql/admin/import.php --post-data 'chbOverwrite=1&selImportFile[]=/usr/local/nagios/etc/import/nagiosadmin.cfg' -O nagiosql.import.monitoring
--2010-10-22 11:13:48-- http://localhost/nagiosql/admin/import.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.import.monitoring'
0K 0.00 =0s
2010-10-22 11:13:48 (0.00 B/s) - `nagiosql.import.monitoring' saved [0/0]
IMPORTING /usr/local/nagios/etc/import/templates.cfg
CMDLINE:
/usr/bin/wget --load-cookies=nagiosql.cookies http://localhost/nagiosql/admin/import.php --post-data 'chbOverwrite=1&selImportFile[]=/usr/local/nagios/etc/import/templates.cfg' -O nagiosql.import.monitoring
--2010-10-22 11:13:48-- http://localhost/nagiosql/admin/import.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.import.monitoring'
0K 0.00 =0s
2010-10-22 11:13:48 (0.00 B/s) - `nagiosql.import.monitoring' saved [0/0]
IMPORTING /usr/local/nagios/etc/import/timeperiods.cfg
CMDLINE:
/usr/bin/wget --load-cookies=nagiosql.cookies http://localhost/nagiosql/admin/import.php --post-data 'chbOverwrite=1&selImportFile[]=/usr/local/nagios/etc/import/timeperiods.cfg' -O nagiosql.import.monitoring
--2010-10-22 11:13:48-- http://localhost/nagiosql/admin/import.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.import.monitoring'
0K 0.00 =0s
2010-10-22 11:13:48 (0.00 B/s) - `nagiosql.import.monitoring' saved [0/0]
IMPORTING /usr/local/nagios/etc/import/xicommands.cfg
CMDLINE:
/usr/bin/wget --load-cookies=nagiosql.cookies http://localhost/nagiosql/admin/import.php --post-data 'chbOverwrite=1&selImportFile[]=/usr/local/nagios/etc/import/xicommands.cfg' -O nagiosql.import.monitoring
--2010-10-22 11:13:48-- http://localhost/nagiosql/admin/import.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.import.monitoring'
0K 0.00 =0s
2010-10-22 11:13:48 (0.00 B/s) - `nagiosql.import.monitoring' saved [0/0]
IMPORTING /usr/local/nagios/etc/import/xiobjects.cfg
CMDLINE:
/usr/bin/wget --load-cookies=nagiosql.cookies http://localhost/nagiosql/admin/import.php --post-data 'chbOverwrite=1&selImportFile[]=/usr/local/nagios/etc/import/xiobjects.cfg' -O nagiosql.import.monitoring
--2010-10-22 11:13:48-- http://localhost/nagiosql/admin/import.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.import.monitoring'
0K 0.00 =0s
2010-10-22 11:13:48 (0.00 B/s) - `nagiosql.import.monitoring' saved [0/0]
IMPORTING /usr/local/nagios/etc/import/xitemplates.cfg
CMDLINE:
/usr/bin/wget --load-cookies=nagiosql.cookies http://localhost/nagiosql/admin/import.php --post-data 'chbOverwrite=1&selImportFile[]=/usr/local/nagios/etc/import/xitemplates.cfg' -O nagiosql.import.monitoring
--2010-10-22 11:13:48-- http://localhost/nagiosql/admin/import.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.import.monitoring'
0K 0.00 =0s
2010-10-22 11:13:48 (0.00 B/s) - `nagiosql.import.monitoring' saved [0/0]
IMPORTING /usr/local/nagios/etc/import/xiwzardtemplates.cfg
CMDLINE:
/usr/bin/wget --load-cookies=nagiosql.cookies http://localhost/nagiosql/admin/import.php --post-data 'chbOverwrite=1&selImportFile[]=/usr/local/nagios/etc/import/xiwzardtemplates.cfg' -O nagiosql.import.monitoring
--2010-10-22 11:13:48-- http://localhost/nagiosql/admin/import.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.import.monitoring'
0K 0.00 =0s
2010-10-22 11:13:48 (0.00 B/s) - `nagiosql.import.monitoring' saved [0/0]
RESETTING PERMS
SETUID ROOT OK
--2010-10-22 11:13:48-- http://localhost/nagiosql/index.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.login'
0K 0.00 =0s
2010-10-22 11:13:48 (0.00 B/s) - `nagiosql.login' saved [0/0]
CMDLINE:
/usr/bin/wget --load-cookies=nagiosql.cookies http://localhost/nagiosql/admin/verify.php --post-data 'writeMonitoring=Go' -O nagiosql.export.monitoring
--2010-10-22 11:13:49-- http://localhost/nagiosql/admin/verify.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.export.monitoring'
0K 0.00 =0s
2010-10-22 11:13:49 (0.00 B/s) - `nagiosql.export.monitoring' saved [0/0]
--2010-10-22 11:13:49-- http://localhost/nagiosql/admin/verify.php
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/html]
Saving to: `nagiosql.export.additional'
0K 0.00 =0s
2010-10-22 11:13:49 (0.00 B/s) - `nagiosql.export.additional' saved [0/0]
CMDLINE:
/usr/bin/wget --load-cookies=nagiosql.cookies http://localhost/nagiosql/admin/verify.php --post-data 'writeAdditional=Go' -O nagiosql.export.additional
OUTPUT:
Nagios Core 3.2.2
Copyright (c) 2009-2010 Nagios Core Development Team and Community Contributors
Copyright (c) 1999-2009 Ethan Galstad
Last Modified: 09-01-2010
License: GPL
Website: http://www.nagios.org
Reading configuration data...
Read main config file okay...
Processing object config directory '/usr/local/nagios/etc/static'...
Processing object config file '/usr/local/nagios/etc/static/xitest.cfg'...
Processing object config file '/usr/local/nagios/etc/static/xiobjects.cfg'...
Processing object config file '/usr/local/nagios/etc/static/xitemplates.cfg'...
Processing object config file '/usr/local/nagios/etc/contacttemplates.cfg'...
Error: Cannot open config file '/usr/local/nagios/etc/contacttemplates.cfg' for reading: No such file or directory
Error processing object config files!
***> One or more problems was encountered while processing the config files...
Check your configuration file(s) to ensure that they contain valid
directives and data defintions. If you are upgrading from a previous
version of Nagios, you should be aware that some variables/definitions
may have been removed or modified in this version. Make sure to read
the HTML documentation regarding the config files, as well as the
'Whats New' section to find out what has changed.
RET: 254
/usr/local/nagiosxi/nom/checkpoints/nagioscore/errors /tmp/nagiosxi/nagiosxi/basedir/scripts
tar: Removing leading `/' from member names
/tmp/nagiosxi/nagiosxi/basedir/scripts
ls: /usr/local/nagiosxi/nom/checkpoints/nagioscore/*.gz: No such file or directory
NO NOM SNAPSHOT FOUND!
/tmp/nagiosxi
Re: Ongoing CCM Problems
Can you post the tail of your apache error log after attempting to access Nagiosql through the Web interface? PHP error message are turned off by default on our installation, so if you're getting a blank screen it's probably a php error. I noticed an error message in the install scripts regarding the pear/html templating library, which is what Nagiosql uses. I'm wondering if they're related.