No graphs data

This support forum board is for support questions relating to Nagios XI, our flagship commercial network monitoring solution.
Locked
rcordeiro
Posts: 30
Joined: Fri Feb 01, 2013 10:12 am

No graphs data

Post by rcordeiro »

Hi,

Since 2 weeks ago I just lost all info on the graphs (bandwidth, connectivity and performance), already checked several information on other threads but no success.

Using lastest version of Nagios (Nagios XI 2012R1.6)
Using the VM from the site (with some changes on memory and disk space)
No specific options or produtcs installed on the VM.

Just let me know what kind of information you need to troubleshoot.

Also, I manage a licensed server but I don't have access to the support forum for customers.

Regards,
Top
User avatar
lmiltchev
Bugs find me
Posts: 13589
Joined: Mon May 23, 2011 12:15 pm

Re: No graphs data

Post by lmiltchev »

Let's clarify - do you get "empty" graphs or you don't see any graphs at all? Can you post a screenshot? Did you follow the steps, outlined on our wiki page?

http://support.nagios.com/wiki/index.ph ... h_Problems
Also, I manage a licensed server but I don't have access to the support forum for customers.
Please, send us an email at [email protected] with your username, so that we can grant you an access to the customer support forum. Thanks!
Be sure to check out our Knowledgebase for helpful articles and solutions!
Top
slansing
Posts: 7698
Joined: Mon Apr 23, 2012 4:28 pm
Location: Travelling through time and space...

Re: No graphs data

Post by slansing »

What steps did you try already? This is important for us to know so that we can both build off of what you have done, and find out if any more damage could have been caused. Lets also start with some basic things please run the following and report it back here:

Code: Select all

service npcd status

Code: Select all

ll /usr/local/nagios/var/spool/perfdata/|wc -l

Code: Select all

ll /usr/local/nagios/var/spool/perfdata/xidpe/|wc -l
Top
rcordeiro
Posts: 30
Joined: Fri Feb 01, 2013 10:12 am

Re: No graphs data

Post by rcordeiro »

I get empty graphs.

[root@nagios /]# service npcd status
NPCD running (pid 23108).

[root@nagios /]# ll /usr/local/nagios/var/spool/perfdata/|wc -l
8

[root@nagios /]# ll /usr/local/nagios/var/spool/perfdata/xidpe/|wc -l
ls: cannot access /usr/local/nagios/var/spool/perfdata/xidpe/: No such file or directory
0
Top
abrist
Red Shirt
Posts: 8334
Joined: Thu Nov 15, 2012 1:20 pm

Re: No graphs data

Post by abrist »

Could you post a tail of the following logs:

Code: Select all

tail -50 /usr/local/nagios/var/perfdata.log
tail -50 /usr/local/nagios/var/npcd.log
Former Nagios employee
"It is turtles. All. The. Way. Down. . . .and maybe an elephant or two."
VI VI VI - The editor of the Beast!
Come to the Dark Side.
Top
rcordeiro
Posts: 30
Joined: Fri Feb 01, 2013 10:12 am

Re: No graphs data

Post by rcordeiro »

[root@nagios /]# tail -50 /usr/local/nagios/var/perfdata.log
2013-02-19 16:25:15 [5659] [0] *** Timeout while processing Host: "SRM-S6506" Service: "Ethernet2_0_5_Bandwidth"
2013-02-19 16:25:15 [5659] [0] *** process_perfdata.pl terminated on signal ALRM
2013-02-19 16:26:30 [1824] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-02-19 16:26:30 [1824] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-02-19 16:26:30 [1824] [0] *** TIMEOUT: Please check your npcd.cfg
2013-02-19 16:26:30 [1824] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1361278155.perfdata.service-PID-1824 deleted
2013-02-19 16:26:30 [1824] [0] *** Timeout while processing Host: "LAD-CTAP-NE40-8-BSR" Service: "Ethernet3_1_15_Bandwidth"
2013-02-19 16:26:30 [1824] [0] *** process_perfdata.pl terminated on signal ALRM
2013-02-19 16:27:21 [10805] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-02-19 16:27:21 [10805] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-02-19 16:27:21 [10805] [0] *** TIMEOUT: Please check your npcd.cfg
2013-02-19 16:27:21 [10805] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1361279655.perfdata.service-PID-10805 deleted
2013-02-19 16:27:21 [10805] [0] *** Timeout while processing Host: "SRM-S6506" Service: "Ethernet2_0_11_Bandwidth"
2013-02-19 16:27:21 [10805] [0] *** process_perfdata.pl terminated on signal ALRM
2013-02-19 16:27:31 [22167] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-02-19 16:27:31 [22167] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-02-19 16:27:31 [22167] [0] *** TIMEOUT: Please check your npcd.cfg
2013-02-19 16:27:31 [22167] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1361279925.perfdata.service-PID-22167 deleted
2013-02-19 16:27:31 [22167] [0] *** Timeout while processing Host: "LAD-CTAP-NE40-8-CORE" Service: "GigabitEthernet5_0_2_Bandwidth"
2013-02-19 16:27:31 [22167] [0] *** process_perfdata.pl terminated on signal ALRM
2013-02-19 16:27:31 [22161] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-02-19 16:27:31 [22161] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-02-19 16:27:31 [22161] [0] *** TIMEOUT: Please check your npcd.cfg
2013-02-19 16:27:31 [22161] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1361279895.perfdata.service-PID-22161 deleted
2013-02-19 16:27:31 [22161] [0] *** Timeout while processing Host: "SRM-S6506" Service: "Ethernet2_0_4_Bandwidth"
2013-02-19 16:27:31 [22161] [0] *** process_perfdata.pl terminated on signal ALRM
2013-02-19 16:29:19 [25950] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-02-19 16:29:19 [25950] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-02-19 16:29:19 [25950] [0] *** TIMEOUT: Please check your npcd.cfg
2013-02-19 16:29:19 [25950] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1361281155.perfdata.service-PID-25950 deleted
2013-02-19 16:29:19 [25950] [0] *** Timeout while processing Host: "LBG-S6506" Service: "Ethernet2_0_46_Bandwidth"
2013-02-19 16:29:19 [25950] [0] *** process_perfdata.pl terminated on signal ALRM
2013-02-19 16:54:21 [25948] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-02-19 16:54:21 [25948] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-02-19 16:54:21 [25948] [0] *** TIMEOUT: Please check your npcd.cfg
2013-02-19 16:54:21 [25948] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1361289243.perfdata.service-PID-25948 deleted
2013-02-19 16:54:21 [25948] [0] *** Timeout while processing Host: "LAD-PRD-S6506" Service: "Ethernet2_0_35_Bandwidth"
2013-02-19 16:54:21 [25948] [0] *** process_perfdata.pl terminated on signal ALRM
2013-02-19 17:04:21 [1864] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-02-19 17:04:21 [1864] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-02-19 17:04:21 [1864] [0] *** TIMEOUT: Please check your npcd.cfg
2013-02-19 17:04:21 [1864] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1361289843.perfdata.service-PID-1864 deleted
2013-02-19 17:04:21 [1864] [0] *** Timeout while processing Host: "LAD-PRD-S6506" Service: "Ethernet2_0_13_Bandwidth"
2013-02-19 17:04:21 [1864] [0] *** process_perfdata.pl terminated on signal ALRM
2013-02-19 17:14:22 [8704] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-02-19 17:14:22 [8704] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-02-19 17:14:22 [8704] [0] *** TIMEOUT: Please check your npcd.cfg
2013-02-19 17:14:22 [8704] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1361290443.perfdata.service-PID-8704 deleted
2013-02-19 17:14:22 [8704] [0] *** Timeout while processing Host: "LAD-GLFII-S6506" Service: "Ethernet2_0_45_Bandwidth"
2013-02-19 17:14:22 [8704] [0] *** process_perfdata.pl terminated on signal ALRM
[root@nagios /]#


[root@nagios /]# tail -50 /usr/local/nagios/var/npcd.log
[02-19-2013 16:07:57] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361259930.perfdata.service'
[02-19-2013 16:07:57] NPCD: WARN: MAX load reached: load 33.650000/30.000000 at i=6285[02-19-2013 16:08:22] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:08:22] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361260125.perfdata.service'
[02-19-2013 16:08:28] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:08:28] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361260170.perfdata.service'
[02-19-2013 16:08:28] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:08:28] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361260185.perfdata.service'
[02-19-2013 16:08:28] NPCD: WARN: MAX load reached: load 32.200000/30.000000 at i=6320[02-19-2013 16:09:56] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:09:56] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361262210.perfdata.service'
[02-19-2013 16:10:15] NPCD: WARN: MAX load reached: load 30.090000/30.000000 at i=6645[02-19-2013 16:10:30] NPCD: WARN: MAX load reached: load 41.220000/30.000000 at i=6645[02-19-2013 16:10:45] NPCD: WARN: MAX load reached: load 32.150000/30.000000 at i=6645[02-19-2013 16:11:00] NPCD: WARN: MAX load reached: load 30.260000/30.000000 at i=6645[02-19-2013 16:12:31] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:12:31] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361264629.perfdata.service'
[02-19-2013 16:12:56] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:12:56] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361265229.perfdata.service'
[02-19-2013 16:12:56] NPCD: WARN: MAX load reached: load 36.990000/30.000000 at i=6995[02-19-2013 16:13:28] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:13:28] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361265589.perfdata.service'
[02-19-2013 16:13:28] NPCD: WARN: MAX load reached: load 39.140000/30.000000 at i=7040[02-19-2013 16:13:43] NPCD: WARN: MAX load reached: load 30.470000/30.000000 at i=7040[02-19-2013 16:13:58] NPCD: WARN: MAX load reached: load 30.050000/30.000000 at i=7040[02-19-2013 16:14:56] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:14:56] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361266729.perfdata.service'
[02-19-2013 16:15:16] NPCD: WARN: MAX load reached: load 30.450000/30.000000 at i=7265[02-19-2013 16:15:31] NPCD: WARN: MAX load reached: load 42.790000/30.000000 at i=7265[02-19-2013 16:15:46] NPCD: WARN: MAX load reached: load 34.330000/30.000000 at i=7265[02-19-2013 16:17:30] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:17:30] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361269505.perfdata.service'
[02-19-2013 16:17:57] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:17:57] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361270022.perfdata.service'
[02-19-2013 16:17:57] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:17:57] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361270037.perfdata.service'
[02-19-2013 16:17:57] NPCD: WARN: MAX load reached: load 31.100000/30.000000 at i=7630[02-19-2013 16:18:26] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:18:26] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361270307.perfdata.service'
[02-19-2013 16:18:26] NPCD: WARN: MAX load reached: load 31.170000/30.000000 at i=7665[02-19-2013 16:20:26] NPCD: WARN: MAX load reached: load 37.430000/30.000000 at i=7990[02-19-2013 16:20:55] NPCD: WARN: MAX load reached: load 35.280000/30.000000 at i=8040[02-19-2013 16:21:10] NPCD: WARN: MAX load reached: load 31.960000/30.000000 at i=8040[02-19-2013 16:22:30] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:22:30] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361274855.perfdata.service'
[02-19-2013 16:22:56] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:22:56] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361275455.perfdata.service'
[02-19-2013 16:22:56] NPCD: WARN: MAX load reached: load 35.410000/30.000000 at i=8350[02-19-2013 16:23:25] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:23:25] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361275755.perfdata.service'
[02-19-2013 16:23:25] NPCD: WARN: MAX load reached: load 35.070000/30.000000 at i=8390[02-19-2013 16:23:55] NPCD: WARN: MAX load reached: load 38.420000/30.000000 at i=8445[02-19-2013 16:25:15] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:25:15] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361277855.perfdata.service'
[02-19-2013 16:25:15] NPCD: WARN: MAX load reached: load 31.160000/30.000000 at i=8670[02-19-2013 16:25:30] NPCD: WARN: MAX load reached: load 41.210000/30.000000 at i=8670[02-19-2013 16:25:45] NPCD: WARN: MAX load reached: load 32.080000/30.000000 at i=8670[02-19-2013 16:26:00] NPCD: WARN: MAX load reached: load 31.020000/30.000000 at i=8670[02-19-2013 16:26:30] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:26:30] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361278155.perfdata.service'
[02-19-2013 16:27:21] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:27:21] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361279655.perfdata.service'
[02-19-2013 16:27:31] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:27:31] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361279925.perfdata.service'
[02-19-2013 16:27:31] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:27:31] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361279895.perfdata.service'
[02-19-2013 16:27:42] NPCD: WARN: MAX load reached: load 34.700000/30.000000 at i=8975[02-19-2013 16:27:57] NPCD: WARN: MAX load reached: load 42.250000/30.000000 at i=8975[02-19-2013 16:28:12] NPCD: WARN: MAX load reached: load 32.890000/30.000000 at i=8975[02-19-2013 16:28:27] NPCD: WARN: MAX load reached: load 34.780000/30.000000 at i=8975[02-19-2013 16:29:19] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:29:19] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361281155.perfdata.service'
[02-19-2013 16:30:20] NPCD: WARN: MAX load reached: load 30.220000/30.000000 at i=9345[02-19-2013 16:30:35] NPCD: WARN: MAX load reached: load 35.110000/30.000000 at i=9345[02-19-2013 16:30:56] NPCD: WARN: MAX load reached: load 31.870000/30.000000 at i=9355[02-19-2013 16:32:40] NPCD: WARN: MAX load reached: load 30.040000/30.000000 at i=170[02-19-2013 16:32:55] NPCD: WARN: MAX load reached: load 30.300000/30.000000 at i=170[02-19-2013 16:33:26] NPCD: WARN: MAX load reached: load 30.520000/30.000000 at i=220[02-19-2013 16:35:26] NPCD: WARN: MAX load reached: load 39.930000/30.000000 at i=25[02-19-2013 16:35:41] NPCD: WARN: MAX load reached: load 31.080000/30.000000 at i=25[02-19-2013 16:40:28] NPCD: WARN: MAX load reached: load 32.480000/30.000000 at i=0[02-19-2013 16:43:23] NPCD: WARN: MAX load reached: load 31.520000/30.000000 at i=0[02-19-2013 16:43:38] NPCD: WARN: MAX load reached: load 30.770000/30.000000 at i=1[02-19-2013 16:45:32] NPCD: WARN: MAX load reached: load 36.580000/30.000000 at i=0[02-19-2013 16:50:37] NPCD: WARN: MAX load reached: load 33.090000/30.000000 at i=0[02-19-2013 16:54:21] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:54:21] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361289243.perfdata.service'
[02-19-2013 16:55:26] NPCD: WARN: MAX load reached: load 35.800000/30.000000 at i=0[02-19-2013 16:58:36] NPCD: WARN: MAX load reached: load 31.320000/30.000000 at i=0[02-19-2013 17:00:30] NPCD: WARN: MAX load reached: load 34.400000/30.000000 at i=0[02-19-2013 17:04:21] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 17:04:21] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361289843.perfdata.service'
[02-19-2013 17:05:26] NPCD: WARN: MAX load reached: load 30.040000/30.000000 at i=0[02-19-2013 17:14:22] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 17:14:22] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361290443.perfdata.service'
[02-19-2013 17:18:12] NPCD: WARN: MAX load reached: load 30.480000/30.000000 at i=0[02-19-2013 17:18:27] NPCD: WARN: MAX load reached: load 41.840000/30.000000 at i=1[02-19-2013 17:18:42] NPCD: WARN: MAX load reached: load 39.620000/30.000000 at i=1[02-19-2013 17:18:57] NPCD: WARN: MAX load reached: load 30.840000/30.000000 at i=1[02-19-2013 17:20:16] NPCD: WARN: MAX load reached: load 30.430000/30.000000 at i=0[02-19-2013 17:20:31] NPCD: WARN: MAX load reached: load 39.440000/30.000000 at i=1[02-19-2013 17:20:46] NPCD: WARN: MAX load reached: load 30.700000/30.000000 at i=1[02-19-2013 17:23:11] NPCD: WARN: MAX load reached: load 34.720000/30.000000 at i=0[02-19-2013 17:23:26] NPCD: WARN: MAX load reached: load 40.390000/30.000000 at i=1[02-19-2013 17:23:41] NPCD: WARN: MAX load reached: load 38.560000/30.000000 at i=1[02-19-2013 17:23:56] NPCD: WARN: MAX load reached: load 30.170000/30.000000 at i=1[02-19-2013 17:25:32] NPCD: WARN: MAX load reached: load 30.310000/30.000000 at i=0[02-19-2013 17:28:11] NPCD: WARN: MAX load reached: load 33.950000/30.000000 at i=0[02-19-2013 17:28:26] NPCD: WARN: MAX load reached: load 39.420000/30.000000 at i=1[02-19-2013 17:28:41] NPCD: WARN: MAX load reached: load 39.430000/30.000000 at i=1[02-19-2013 17:28:56] NPCD: WARN: MAX load reached: load 30.700000/30.000000 at i=1[02-19-2013 17:30:32] NPCD: WARN: MAX load reached: load 32.880000/30.000000 at i=0[02-19-2013 17:33:11] NPCD: WARN: MAX load reached: load 33.360000/30.000000 at i=0[02-19-2013 17:33:26] NPCD: WARN: MAX load reached: load 38.270000/30.000000 at i=1[02-19-2013 17:33:41] NPCD: WARN: MAX load reached: load 37.990000/30.000000 at i=1[02-19-2013 17:33:56] NPCD: WARN: MAX load reached: load 34.380000/30.000000 at i=1[02-19-2013 17:35:32] NPCD: WARN: MAX load reached: load 35.280000/30.000000 at i=0[02-19-2013 17:38:25] NPCD: WARN: MAX load reached: load 32.000000/30.000000 at i=0[02-19-2013 17:38:40] NPCD: WARN: MAX load reached: load 42.860000/30.000000 at i=1[02-19-2013 17:38:55] NPCD: WARN: MAX load reached: load 33.610000/30.000000 at i=1[02-19-2013 17:39:10] NPCD: WARN: MAX load reached: load 30.430000/30.000000 at i=1[02-19-2013 17:40:31] NPCD: WARN: MAX load reached: load 30.290000/30.000000 at i=0[02-19-2013 17:43:28] NPCD: WARN: MAX load reached: load 30.150000/30.000000 at i=0[root@nagios /]#
Top
User avatar
lmiltchev
Bugs find me
Posts: 13589
Joined: Mon May 23, 2011 12:15 pm

Re: No graphs data

Post by lmiltchev »

Can you also show the output of the following command?

Code: Select all

ll /usr/local/nagios/var/spool/xidpe/|wc -l
Be sure to check out our Knowledgebase for helpful articles and solutions!
Top
slansing
Posts: 7698
Joined: Mon Apr 23, 2012 4:28 pm
Location: Travelling through time and space...

Re: No graphs data

Post by slansing »

After you have ran lmitchev's command above lets do a couple things:

Code: Select all

vi /usr/local/naigos/etc/pnp/process_perfdata.cfg
Change:

Code: Select all

TIMEOUT = 5
To:

Code: Select all

TIMEOUT = 20
Also edit this file:

Code: Select all

vi /usr/local/nagios/etc/pnp/npcd.cfg
Change:

Code: Select all

 load_threshold = 30.0
To:

Code: Select all

load_threshold = 40.0

Code: Select all

service npcd stop

killall -9 npcd

service npcd start
wait about 10 minutes and then tail the logs above again and post the output here.

Also, please post your top:

Code: Select all

top
Top
rcordeiro
Posts: 30
Joined: Fri Feb 01, 2013 10:12 am

Re: No graphs data

Post by rcordeiro »

Code: Select all

[root@nagios /]# ll /usr/local/nagios/var/spool/xidpe/|wc -l
1

Code: Select all

[root@nagios /]# tail -50 /usr/local/nagios/var/perfdata.log
2013-02-19 16:25:15 [5659] [0] *** Timeout while processing Host: "SRM-S6506" Service: "Ethernet2_0_5_Bandwidth"
2013-02-19 16:25:15 [5659] [0] *** process_perfdata.pl terminated on signal ALRM
2013-02-19 16:26:30 [1824] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-02-19 16:26:30 [1824] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-02-19 16:26:30 [1824] [0] *** TIMEOUT: Please check your npcd.cfg
2013-02-19 16:26:30 [1824] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1361278155.perfdata.service-PID-1824 deleted
2013-02-19 16:26:30 [1824] [0] *** Timeout while processing Host: "LAD-CTAP-NE40-8-BSR" Service: "Ethernet3_1_15_Bandwidth"
2013-02-19 16:26:30 [1824] [0] *** process_perfdata.pl terminated on signal ALRM
2013-02-19 16:27:21 [10805] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-02-19 16:27:21 [10805] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-02-19 16:27:21 [10805] [0] *** TIMEOUT: Please check your npcd.cfg
2013-02-19 16:27:21 [10805] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1361279655.perfdata.service-PID-10805 deleted
2013-02-19 16:27:21 [10805] [0] *** Timeout while processing Host: "SRM-S6506" Service: "Ethernet2_0_11_Bandwidth"
2013-02-19 16:27:21 [10805] [0] *** process_perfdata.pl terminated on signal ALRM
2013-02-19 16:27:31 [22167] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-02-19 16:27:31 [22167] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-02-19 16:27:31 [22167] [0] *** TIMEOUT: Please check your npcd.cfg
2013-02-19 16:27:31 [22167] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1361279925.perfdata.service-PID-22167 deleted
2013-02-19 16:27:31 [22167] [0] *** Timeout while processing Host: "LAD-CTAP-NE40-8-CORE" Service: "GigabitEthernet5_0_2_Bandwidth"
2013-02-19 16:27:31 [22167] [0] *** process_perfdata.pl terminated on signal ALRM
2013-02-19 16:27:31 [22161] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-02-19 16:27:31 [22161] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-02-19 16:27:31 [22161] [0] *** TIMEOUT: Please check your npcd.cfg
2013-02-19 16:27:31 [22161] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1361279895.perfdata.service-PID-22161 deleted
2013-02-19 16:27:31 [22161] [0] *** Timeout while processing Host: "SRM-S6506" Service: "Ethernet2_0_4_Bandwidth"
2013-02-19 16:27:31 [22161] [0] *** process_perfdata.pl terminated on signal ALRM
2013-02-19 16:29:19 [25950] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-02-19 16:29:19 [25950] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-02-19 16:29:19 [25950] [0] *** TIMEOUT: Please check your npcd.cfg
2013-02-19 16:29:19 [25950] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1361281155.perfdata.service-PID-25950 deleted
2013-02-19 16:29:19 [25950] [0] *** Timeout while processing Host: "LBG-S6506" Service: "Ethernet2_0_46_Bandwidth"
2013-02-19 16:29:19 [25950] [0] *** process_perfdata.pl terminated on signal ALRM
2013-02-19 16:54:21 [25948] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-02-19 16:54:21 [25948] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-02-19 16:54:21 [25948] [0] *** TIMEOUT: Please check your npcd.cfg
2013-02-19 16:54:21 [25948] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1361289243.perfdata.service-PID-25948 deleted
2013-02-19 16:54:21 [25948] [0] *** Timeout while processing Host: "LAD-PRD-S6506" Service: "Ethernet2_0_35_Bandwidth"
2013-02-19 16:54:21 [25948] [0] *** process_perfdata.pl terminated on signal ALRM
2013-02-19 17:04:21 [1864] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-02-19 17:04:21 [1864] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-02-19 17:04:21 [1864] [0] *** TIMEOUT: Please check your npcd.cfg
2013-02-19 17:04:21 [1864] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1361289843.perfdata.service-PID-1864 deleted
2013-02-19 17:04:21 [1864] [0] *** Timeout while processing Host: "LAD-PRD-S6506" Service: "Ethernet2_0_13_Bandwidth"
2013-02-19 17:04:21 [1864] [0] *** process_perfdata.pl terminated on signal ALRM
2013-02-19 17:14:22 [8704] [0] *** TIMEOUT: Timeout after 5 secs. ***
2013-02-19 17:14:22 [8704] [0] *** TIMEOUT: Deleting current file to avoid NPCD loops
2013-02-19 17:14:22 [8704] [0] *** TIMEOUT: Please check your npcd.cfg
2013-02-19 17:14:22 [8704] [0] *** TIMEOUT: /usr/local/nagios/var/spool/perfdata//1361290443.perfdata.service-PID-8704 deleted
2013-02-19 17:14:22 [8704] [0] *** Timeout while processing Host: "LAD-GLFII-S6506" Service: "Ethernet2_0_45_Bandwidth"
2013-02-19 17:14:22 [8704] [0] *** process_perfdata.pl terminated on signal ALRM

Code: Select all

[root@nagios /]# tail -50 /usr/local/nagios/var/npcd.log
[02-19-2013 16:08:28] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361260170.perfdata.service'
[02-19-2013 16:08:28] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:08:28] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361260185.perfdata.service'
[02-19-2013 16:08:28] NPCD: WARN: MAX load reached: load 32.200000/30.000000 at i=6320[02-19-2013 16:09:56] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:09:56] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361262210.perfdata.service'
[02-19-2013 16:10:15] NPCD: WARN: MAX load reached: load 30.090000/30.000000 at i=6645[02-19-2013 16:10:30] NPCD: WARN: MAX load reached: load 41.220000/30.000000 at i=6645[02-19-2013 16:10:45] NPCD: WARN: MAX load reached: load 32.150000/30.000000 at i=6645[02-19-2013 16:11:00] NPCD: WARN: MAX load reached: load 30.260000/30.000000 at i=6645[02-19-2013 16:12:31] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:12:31] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361264629.perfdata.service'
[02-19-2013 16:12:56] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:12:56] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361265229.perfdata.service'
[02-19-2013 16:12:56] NPCD: WARN: MAX load reached: load 36.990000/30.000000 at i=6995[02-19-2013 16:13:28] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:13:28] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361265589.perfdata.service'
[02-19-2013 16:13:28] NPCD: WARN: MAX load reached: load 39.140000/30.000000 at i=7040[02-19-2013 16:13:43] NPCD: WARN: MAX load reached: load 30.470000/30.000000 at i=7040[02-19-2013 16:13:58] NPCD: WARN: MAX load reached: load 30.050000/30.000000 at i=7040[02-19-2013 16:14:56] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:14:56] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361266729.perfdata.service'
[02-19-2013 16:15:16] NPCD: WARN: MAX load reached: load 30.450000/30.000000 at i=7265[02-19-2013 16:15:31] NPCD: WARN: MAX load reached: load 42.790000/30.000000 at i=7265[02-19-2013 16:15:46] NPCD: WARN: MAX load reached: load 34.330000/30.000000 at i=7265[02-19-2013 16:17:30] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:17:30] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361269505.perfdata.service'
[02-19-2013 16:17:57] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:17:57] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361270022.perfdata.service'
[02-19-2013 16:17:57] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:17:57] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361270037.perfdata.service'
[02-19-2013 16:17:57] NPCD: WARN: MAX load reached: load 31.100000/30.000000 at i=7630[02-19-2013 16:18:26] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:18:26] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361270307.perfdata.service'
[02-19-2013 16:18:26] NPCD: WARN: MAX load reached: load 31.170000/30.000000 at i=7665[02-19-2013 16:20:26] NPCD: WARN: MAX load reached: load 37.430000/30.000000 at i=7990[02-19-2013 16:20:55] NPCD: WARN: MAX load reached: load 35.280000/30.000000 at i=8040[02-19-2013 16:21:10] NPCD: WARN: MAX load reached: load 31.960000/30.000000 at i=8040[02-19-2013 16:22:30] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:22:30] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361274855.perfdata.service'
[02-19-2013 16:22:56] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:22:56] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361275455.perfdata.service'
[02-19-2013 16:22:56] NPCD: WARN: MAX load reached: load 35.410000/30.000000 at i=8350[02-19-2013 16:23:25] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:23:25] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361275755.perfdata.service'
[02-19-2013 16:23:25] NPCD: WARN: MAX load reached: load 35.070000/30.000000 at i=8390[02-19-2013 16:23:55] NPCD: WARN: MAX load reached: load 38.420000/30.000000 at i=8445[02-19-2013 16:25:15] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:25:15] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361277855.perfdata.service'
[02-19-2013 16:25:15] NPCD: WARN: MAX load reached: load 31.160000/30.000000 at i=8670[02-19-2013 16:25:30] NPCD: WARN: MAX load reached: load 41.210000/30.000000 at i=8670[02-19-2013 16:25:45] NPCD: WARN: MAX load reached: load 32.080000/30.000000 at i=8670[02-19-2013 16:26:00] NPCD: WARN: MAX load reached: load 31.020000/30.000000 at i=8670[02-19-2013 16:26:30] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:26:30] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361278155.perfdata.service'
[02-19-2013 16:27:21] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:27:21] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361279655.perfdata.service'
[02-19-2013 16:27:31] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:27:31] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361279925.perfdata.service'
[02-19-2013 16:27:31] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:27:31] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361279895.perfdata.service'
[02-19-2013 16:27:42] NPCD: WARN: MAX load reached: load 34.700000/30.000000 at i=8975[02-19-2013 16:27:57] NPCD: WARN: MAX load reached: load 42.250000/30.000000 at i=8975[02-19-2013 16:28:12] NPCD: WARN: MAX load reached: load 32.890000/30.000000 at i=8975[02-19-2013 16:28:27] NPCD: WARN: MAX load reached: load 34.780000/30.000000 at i=8975[02-19-2013 16:29:19] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:29:19] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361281155.perfdata.service'
[02-19-2013 16:30:20] NPCD: WARN: MAX load reached: load 30.220000/30.000000 at i=9345[02-19-2013 16:30:35] NPCD: WARN: MAX load reached: load 35.110000/30.000000 at i=9345[02-19-2013 16:30:56] NPCD: WARN: MAX load reached: load 31.870000/30.000000 at i=9355[02-19-2013 16:32:40] NPCD: WARN: MAX load reached: load 30.040000/30.000000 at i=170[02-19-2013 16:32:55] NPCD: WARN: MAX load reached: load 30.300000/30.000000 at i=170[02-19-2013 16:33:26] NPCD: WARN: MAX load reached: load 30.520000/30.000000 at i=220[02-19-2013 16:35:26] NPCD: WARN: MAX load reached: load 39.930000/30.000000 at i=25[02-19-2013 16:35:41] NPCD: WARN: MAX load reached: load 31.080000/30.000000 at i=25[02-19-2013 16:40:28] NPCD: WARN: MAX load reached: load 32.480000/30.000000 at i=0[02-19-2013 16:43:23] NPCD: WARN: MAX load reached: load 31.520000/30.000000 at i=0[02-19-2013 16:43:38] NPCD: WARN: MAX load reached: load 30.770000/30.000000 at i=1[02-19-2013 16:45:32] NPCD: WARN: MAX load reached: load 36.580000/30.000000 at i=0[02-19-2013 16:50:37] NPCD: WARN: MAX load reached: load 33.090000/30.000000 at i=0[02-19-2013 16:54:21] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 16:54:21] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361289243.perfdata.service'
[02-19-2013 16:55:26] NPCD: WARN: MAX load reached: load 35.800000/30.000000 at i=0[02-19-2013 16:58:36] NPCD: WARN: MAX load reached: load 31.320000/30.000000 at i=0[02-19-2013 17:00:30] NPCD: WARN: MAX load reached: load 34.400000/30.000000 at i=0[02-19-2013 17:04:21] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 17:04:21] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361289843.perfdata.service'
[02-19-2013 17:05:26] NPCD: WARN: MAX load reached: load 30.040000/30.000000 at i=0[02-19-2013 17:14:22] NPCD: ERROR: Executed command exits with return code '7'
[02-19-2013 17:14:22] NPCD: ERROR: Command line was '/usr/local/nagios/libexec/process_perfdata.pl -n -b /usr/local/nagios/var/spool/perfdata//1361290443.perfdata.service'
[02-19-2013 17:18:12] NPCD: WARN: MAX load reached: load 30.480000/30.000000 at i=0[02-19-2013 17:18:27] NPCD: WARN: MAX load reached: load 41.840000/30.000000 at i=1[02-19-2013 17:18:42] NPCD: WARN: MAX load reached: load 39.620000/30.000000 at i=1[02-19-2013 17:18:57] NPCD: WARN: MAX load reached: load 30.840000/30.000000 at i=1[02-19-2013 17:20:16] NPCD: WARN: MAX load reached: load 30.430000/30.000000 at i=0[02-19-2013 17:20:31] NPCD: WARN: MAX load reached: load 39.440000/30.000000 at i=1[02-19-2013 17:20:46] NPCD: WARN: MAX load reached: load 30.700000/30.000000 at i=1[02-19-2013 17:23:11] NPCD: WARN: MAX load reached: load 34.720000/30.000000 at i=0[02-19-2013 17:23:26] NPCD: WARN: MAX load reached: load 40.390000/30.000000 at i=1[02-19-2013 17:23:41] NPCD: WARN: MAX load reached: load 38.560000/30.000000 at i=1[02-19-2013 17:23:56] NPCD: WARN: MAX load reached: load 30.170000/30.000000 at i=1[02-19-2013 17:25:32] NPCD: WARN: MAX load reached: load 30.310000/30.000000 at i=0[02-19-2013 17:28:11] NPCD: WARN: MAX load reached: load 33.950000/30.000000 at i=0[02-19-2013 17:28:26] NPCD: WARN: MAX load reached: load 39.420000/30.000000 at i=1[02-19-2013 17:28:41] NPCD: WARN: MAX load reached: load 39.430000/30.000000 at i=1[02-19-2013 17:28:56] NPCD: WARN: MAX load reached: load 30.700000/30.000000 at i=1[02-19-2013 17:30:32] NPCD: WARN: MAX load reached: load 32.880000/30.000000 at i=0[02-19-2013 17:33:11] NPCD: WARN: MAX load reached: load 33.360000/30.000000 at i=0[02-19-2013 17:33:26] NPCD: WARN: MAX load reached: load 38.270000/30.000000 at i=1[02-19-2013 17:33:41] NPCD: WARN: MAX load reached: load 37.990000/30.000000 at i=1[02-19-2013 17:33:56] NPCD: WARN: MAX load reached: load 34.380000/30.000000 at i=1[02-19-2013 17:35:32] NPCD: WARN: MAX load reached: load 35.280000/30.000000 at i=0[02-19-2013 17:38:25] NPCD: WARN: MAX load reached: load 32.000000/30.000000 at i=0[02-19-2013 17:38:40] NPCD: WARN: MAX load reached: load 42.860000/30.000000 at i=1[02-19-2013 17:38:55] NPCD: WARN: MAX load reached: load 33.610000/30.000000 at i=1[02-19-2013 17:39:10] NPCD: WARN: MAX load reached: load 30.430000/30.000000 at i=1[02-19-2013 17:40:31] NPCD: WARN: MAX load reached: load 30.290000/30.000000 at i=0[02-19-2013 17:43:28] NPCD: WARN: MAX load reached: load 30.150000/30.000000 at i=0[02-19-2013 17:43:43] NPCD: WARN: MAX load reached: load 32.900000/30.000000 at i=1[02-19-2013 17:43:58] NPCD: WARN: MAX load reached: load 35.850000/30.000000 at i=1[02-19-2013 18:23:28] NPCD: WARN: MAX load reached: load 31.520000/30.000000 at i=0[02-19-2013 18:23:43] NPCD: WARN: MAX load reached: load 35.980000/30.000000 at i=1[02-19-2013 18:24:47] NPCD: Caught Termination Signal - Hasta la vista... baby
[02-19-2013 18:24:48] NPCD: npcd Daemon (0.4.14) started with PID=23433
[02-19-2013 18:24:48] NPCD: Please have a look at 'npcd -V' to get license information
[02-19-2013 18:24:48] NPCD: HINT: load_threshold is enabled - ('40.000000')
[02-19-2013 18:28:28] NPCD: WARN: MAX load reached: load 42.030000/40.000000 at i=0[root@nagios /]#

Code: Select all

top - 18:37:24 up 1 day, 1:46, 1 user, load average: 24.19, 27.19, 23.14
Tasks: 224 total, 2 running, 218 sleeping, 0 stopped, 4 zombie
Cpu(s): 37.6%us, 15.2%sy, 0.0%ni, 42.8%id, 4.2%wa, 0.0%hi, 0.1%si, 0.0%st
Mem: 3908424k total, 3129508k used, 778916k free, 41576k buffers
Swap: 262136k total, 62056k used, 200080k free, 1083848k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
18866 nagios 20 0 32132 4768 1948 R 27.3 0.1 0:00.19 process_perfdat
19924 apache 20 0 436m 30m 4580 S 9.8 0.8 1:49.39 httpd
20206 nagios 20 0 141m 10m 2220 S 9.8 0.3 0:00.09 check_ifopersta
20211 nagios 20 0 141m 10m 2220 S 9.8 0.3 0:00.08 check_ifopersta
20219 nagios 20 0 141m 10m 2220 S 9.8 0.3 0:00.09 check_ifopersta
20222 nagios 20 0 141m 10m 2220 S 9.8 0.3 0:00.08 check_ifopersta
4479 mysql 20 0 2177m 35m 3640 S 7.8 0.9 68:22.88 mysqld
20207 nagios 20 0 141m 10m 2220 S 7.8 0.3 0:00.08 check_ifopersta
20208 nagios 20 0 141m 10m 2220 S 7.8 0.3 0:00.08 check_ifopersta
29494 apache 20 0 437m 30m 4364 S 7.8 0.8 0:33.59 httpd
22588 nagios 20 0 841m 12m 856 S 5.9 0.3 29:40.63 rrdcached
36 root 20 0 0 0 0 S 2.0 0.0 2:45.91 kblockd/2
10924 apache 20 0 437m 31m 4552 S 2.0 0.8 0:40.95 httpd
11450 nagios 20 0 212m 21m 7844 S 2.0 0.6 0:00.13 php
20387 root 20 0 15160 1256 832 R 2.0 0.0 0:00.01 top
29705 root 20 0 134m 48m 3012 S 2.0 1.3 0:06.47 mrtg
1 root 20 0 19352 1112 880 S 0.0 0.0 0:01.26 init
2 root 20 0 0 0 0 S 0.0 0.0 0:00.01 kthreadd
3 root RT 0 0 0 0 S 0.0 0.0 0:31.02 migration/0
4 root 20 0 0 0 0 S 0.0 0.0 0:02.57 ksoftirqd/0
5 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
6 root RT 0 0 0 0 S 0.0 0.0 0:00.12 watchdog/0
7 root RT 0 0 0 0 S 0.0 0.0 0:24.89 migration/1
8 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/1
9 root 20 0 0 0 0 S 0.0 0.0 0:01.83 ksoftirqd/1
10 root RT 0 0 0 0 S 0.0 0.0 0:00.09 watchdog/1
11 root RT 0 0 0 0 S 0.0 0.0 0:25.69 migration/2
12 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/2
13 root 20 0 0 0 0 S 0.0 0.0 0:03.70 ksoftirqd/2
14 root RT 0 0 0 0 S 0.0 0.0 0:00.09 watchdog/2
15 root RT 0 0 0 0 S 0.0 0.0 1:06.65 migration/3
16 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/3
17 root 20 0 0 0 0 S 0.0 0.0 0:08.60 ksoftirqd/3
18 root RT 0 0 0 0 S 0.0 0.0 0:00.09 watchdog/3
19 root 20 0 0 0 0 S 0.0 0.0 0:04.18 events/0
20 root 20 0 0 0 0 S 0.0 0.0 0:04.38 events/1
21 root 20 0 0 0 0 S 0.0 0.0 0:37.66 events/2
Last edited by slansing on Tue Feb 19, 2013 12:48 pm, edited 2 times in total.
Reason: Please wrap these dumps in "code wrap."
Top
abrist
Red Shirt
Posts: 8334
Joined: Thu Nov 15, 2012 1:20 pm

Re: No graphs data

Post by abrist »

It looks like the load and timeout threshold values are unchanged. Did you restart npcd after increasing these limits?
Former Nagios employee
"It is turtles. All. The. Way. Down. . . .and maybe an elephant or two."
VI VI VI - The editor of the Beast!
Come to the Dark Side.
Top
Locked

Return to “Nagios XI”