Apply Settings

[wiproltdwiv]

No no file is there. Apply configuration is happening but it is taking long time. i have tryid with changing the multiple values in php.ini but still also it is taking long time. Below are the current value in file
# vi /etc/php.ini
max_execution_time = 1200
max_input_time = 90
memory_limit = 4096M

we have big setup, so we dont have that much time to wait for 40 or 50 min for single apply configuration. please check and suggest.

[root@EMSNagios1 scripts]# ls -l /usr/local/nagios/etc/import/
total 0
[root@EMSNagios1 scripts]#

[abrist]

Even for your size of an installation 45 minutes is way too long. What does the disk io and wait look like while applying configuration?

[wiproltdwiv]

attached output of Top command while apply configuration.

[abrist]

Load looks ok. You have a little bit of io/wait, but not enough to justify the 45 minute delay.
Your time+ numbers for flush* are really high. Next time you apply configuraiton, pull up top and take a few screens as well as run:

Code: Select all

ps -aux

And post those here.

[wiproltdwiv]

Please find the attached files.

[slansing]

Do you by any chance have an offloaded database? Or any modifications beyond what is default on the Nagios XI Mysql database? Have you noticed sluggishness anywhere else in the interface?

[abrist]

root 3697 0.0 0.0 451868 14496 ? Sl Jan29 0:09 metacity
root 3699 0.0 0.0 362232 22432 ? S Jan29 7:44 gnome-panel
root 3700 0.1 0.0 1026908 25504 ? S Jan29 252:30 nautilus

It looks like you have a full graphical/workstation install on your XI server. This is not recommended, but is probably not the cause of your issues.

apache 5893 0.0 0.0 599160 10332 ? S 01:20 0:00 /usr/sbin/httpd
apache 5894 12.3 0.1 728428 57748 ? S 01:20 15:50 /usr/sbin/httpd
apache 5895 13.5 0.1 729160 53936 ? S 01:20 17:18 /usr/sbin/httpd
apache 5896 2.3 0.1 728496 53336 ? S 01:20 3:02 /usr/sbin/httpd
apache 5897 2.4 0.1 728764 61424 ? S 01:20 3:05 /usr/sbin/httpd
apache 5898 12.9 0.1 728484 55548 ? S 01:20 16:39 /usr/sbin/httpd
apache 5899 5.9 0.1 727056 54404 ? S 01:20 7:39 /usr/sbin/httpd
apache 5900 3.1 0.1 729072 54836 ? S 01:20 4:05 /usr/sbin/httpd
apache 5901 11.5 0.1 729152 54012 ? S 01:20 14:45 /usr/sbin/httpd
apache 25526 13.8 0.1 728244 53472 ? S 01:28 16:40 /usr/sbin/httpd

Do you use many operations screens or have you configured a view rotation that is server intensive?

Were these files created during an apply configuration? If so, load may not be your problem. You may have issues with i/o wait.
What type of storage mechanism is configured on this server?

One last set of logs would be useful. Do a running tail on the following files before you apply configuration. Do not stop the tails until apply configuration has completed. Post or PM me the log files from the tails:

Code: Select all

tail -f /usr/local/nagiosxi/var/cmdsubsys.log
tail -f /usr/local/nagiosxi/var/perfdataproc.log