Check Windows Processes

Support forum for Nagios Core, Nagios Plugins, NCPA, NRPE, NSCA, NDOUtils and more. Engage with the community of users including those using the open source solutions.
Locked
ofadl
Posts: 201
Joined: Mon Jun 03, 2013 8:57 am

Re: Check Windows Processes

Post by ofadl »

what are code wraps?
Top
slansing
Posts: 7698
Joined: Mon Apr 23, 2012 4:28 pm
Location: Travelling through time and space...

Re: Check Windows Processes

Post by slansing »

When you are posting a message, you can highlight area's where you show code, and then click the "Code" button above the text window, or just type

Code: Select all

 code here
Top
ofadl
Posts: 201
Joined: Mon Jun 03, 2013 8:57 am

Re: Check Windows Processes

Post by ofadl »

Code: Select all

###############################################################################
# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS
###############################################################################


################################################################################
# NOTIFICATION COMMANDS
################################################################################


# 'notify-host-by-email' command definition
define command{
        command_name    notify-host-by-email
        command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$
        }

# 'notify-service-by-email' command definition
define command{
        command_name    notify-service-by-email
        command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOST$
        }




################################################################################
# HOST CHECK COMMANDS
################################################################################

# On Debian, check-host-alive is being defined from within the
# nagios-plugins-basic package

################################################################################
# PERFORMANCE DATA COMMANDS
################################################################################
# 'process-host-perfdata' command definition
define command{
        command_name    process-host-perfdata
        command_line    /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDA$
        }
# 'process-service-perfdata' command definition
define command{
        command_name    process-service-perfdata
        command_line    /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTI$
        }
# 'check_equinox_http' command definition
define command{
        command_name    check_equinox_http
        command_line    $USER1$/is_url_alive "http://$HOSTADDRESS$$ARG1$" "$ARG2$" "$ARG3$" "$ARG4$"
        }
define command{
        command_name check_mssql
        command_line $USER1$/check_mssql_sproc.pl -H $HOSTADDRESS$ -p "sp_CheckCoreLastDeliveredBusHours" -u user-P "password1" -w $ARG1$ -c $ARG2$
        }
# 'check_local_procs' command definition
define command{
        command_name    check_local_procs
Top
User avatar
lmiltchev
Bugs find me
Posts: 13589
Joined: Mon May 23, 2011 12:15 pm

Re: Check Windows Processes

Post by lmiltchev »

This doesn't look like a complete file...

In addition to that, I don't see "check_nrpe" defined, even though you said in one of your previous posts:
ok i added that defintion into :

"/usr/local/nagios/etc/objects/commands.cfg".
Be sure to check out our Knowledgebase for helpful articles and solutions!
Top
ofadl
Posts: 201
Joined: Mon Jun 03, 2013 8:57 am

Re: Check Windows Processes

Post by ofadl »

well thats the thing, i have two commands files, but that one that i posted i use as my main one and add definitions into it. The weird part is, when i tried to add check_nrpe into that command file, i get a error for duplicate defintion, even though i havent defind it before in that file.

Here is the other file located in /usr/local/nagios/etc/objects/commands.cfg:

Code: Select all

###############################################################################
# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS 3.4.4
#
# Last Modified: 05-31-2007
#
# NOTES: This config file provides you with some example command definitions
#        that you can reference in host, service, and contact definitions.
#
#        You don't need to keep commands in a separate file from your other
#        object definitions.  This has been done just to make things easier to
#        understand.
#
###############################################################################


################################################################################
#
# SAMPLE NOTIFICATION COMMANDS
#
# These are some example notification commands.  They may or may not work on
# your system without modification.  As an example, some systems will require
# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below.
#
################################################################################


# 'notify-host-by-email' command definition
define command{
        command_name    notify-host-by-email
        command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail $
        }

# 'notify-service-by-email' command definition
define command{
        command_name    notify-service-by-email
        command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditi$
        }





################################################################################
#
# SAMPLE HOST CHECK COMMANDS
#
################################################################################


# This command checks to see if a host is "alive" by pinging it
# The check must result in a 100% packet loss or 5 second (5000ms) round trip
# average time to produce a critical error.
# Note: Five ICMP echo packets are sent (determined by the '-p 5' argument)

# 'check-host-alive' command definition
define command{
        command_name    check-host-alive
        command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5

################################################################################
#
# SAMPLE SERVICE CHECK COMMANDS
#
# These are some example service check commands.  They may or may not work on
# your system, as they must be modified for your plugins.  See the HTML
# documentation on the plugins for examples of how to configure command definitions.
#
# NOTE:  The following 'check_local_...' functions are designed to monitor
#        various metrics on the host that Nagios is running on (i.e. this one).
################################################################################

# 'check_local_disk' command definition
define command{
        command_name    check_local_disk
        command_line    $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
        }


# 'check_local_load' command definition
define command{
        command_name    check_local_load
        command_line    $USER1$/check_load -w $ARG1$ -c $ARG2$
        }


# 'check_local_procs' command definition
define command{
        command_name    check_local_procs
        command_line    $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
        }


# 'check_local_users' command definition
define command{
        command_name    check_local_users
        command_line    $USER1$/check_users -w $ARG1$ -c $ARG2$
        }


# 'check_local_swap' command definition
define command{
        command_name    check_local_swap
        command_line    $USER1$/check_swap -w $ARG1$ -c $ARG2$
        }

# 'check_local_mrtgtraf' command definition
define command{
        command_name    check_local_mrtgtraf
        command_line    $USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$
        }


################################################################################
# NOTE:  The following 'check_...' commands are used to monitor services on
#        both local and remote hosts.
################################################################################

# 'check_ftp' command definition
define command{
        command_name    check_ftp
        command_line    $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$
        }


# 'check_hpjd' command definition
define command{
        command_name    check_hpjd
        command_line    $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$
        }


# 'check_snmp' command definition
define command{
        command_name    check_snmp
        command_line    $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$
        }


# 'check_http' command definition
define command{
        command_name    check_http
        command_line    $USER1$/check_http -I $HOSTADDRESS$ $ARG1$
        }


# 'check_ssh' command definition
define command{
        command_name    check_ssh
        command_line    $USER1$/check_ssh $ARG1$ $HOSTADDRESS$
        }


# 'check_dhcp' command definition
define command{
        command_name    check_dhcp
        command_line    $USER1$/check_dhcp $ARG1$
        }


# 'check_ping' command definition
define command{
        command_name    check_ping
        command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5

# 'check_pop' command definition
define command{
        command_name    check_pop
        command_line    $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$
        }


# 'check_imap' command definition
define command{
        command_name    check_imap
        command_line    $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$
        }


# 'check_smtp' command definition
define command{
        command_name    check_smtp
        command_line    $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$
        }


# 'check_tcp' command definition
define command{
        command_name    check_tcp
        command_line    $USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
        }


# 'check_udp' command definition
define command{
        command_name    check_udp
        command_line    $USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
        }


# 'check_nt' command definition
define command{
        command_name    check_nt
        command_line    $USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
        }


################################################################################
#
# SAMPLE PERFORMANCE DATA COMMANDS
#
# These are sample performance data commands that can be used to send performance
# data output to two text files (one for hosts, another for services).  If you
# plan on simply writing performance data out to a file, consider using the
# host_perfdata_file and service_perfdata_file options in the main config file.
#
################################################################################

# 'process-host-perfdata' command definition
define command{
        command_name    process-host-perfdata
        command_line    /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /usr/local/nagios/var/host-perfdata.out
        }


# 'process-service-perfdata' command definition
define command{
        command_name    process-service-perfdata
        command_line    /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /usr/l$
        }

define command {
       command_name                             check_nrpe
       command_line                             $USER1$/check_nrpe -H $HOSTADDRESS$ -t 30 -c $ARG1$ $ARG2$
        }
Top
slansing
Posts: 7698
Joined: Mon Apr 23, 2012 4:28 pm
Location: Travelling through time and space...

Re: Check Windows Processes

Post by slansing »

You should never have two commands.cfg files, remove one, or copy it's contents "that are not duplicates" to the other file, and then remove it. This is going to cause conflicts.
Top
ofadl
Posts: 201
Joined: Mon Jun 03, 2013 8:57 am

Re: Check Windows Processes

Post by ofadl »

wow this is a mess. Ok so i combined them into one file and remove the other, but i had to comment out alot of the commands due to the "duplicate definition" nightmare, and one of the commands i had to comment out was the check_nrpe. This is what my new command file looks like now:

Code: Select all

###############################################################################
# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS 3.4.4
#
# Last Modified: 05-31-2007
#
# NOTES: This config file provides you with some example command definitions
#        that you can reference in host, service, and contact definitions.
#
#        You don't need to keep commands in a separate file from your other
#        object definitions.  This has been done just to make things easier to
#        understand.
#
###############################################################################


################################################################################
#
# SAMPLE NOTIFICATION COMMANDS
#
# These are some example notification commands.  They may or may not work on
# your system without modification.  As an example, some systems will require
# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below.
#
################################################################################


# 'notify-host-by-email' command definition
#define command{
#       command_name    notify-host-by-email
#       command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $H$
#       }

# 'notify-service-by-email' command definition
#define command{
#       command_name    notify-service-by-email
#       command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nS$
#       }





################################################################################
#
# SAMPLE HOST CHECK COMMANDS
#
################################################################################


# This command checks to see if a host is "alive" by pinging it
# The check must result in a 100% packet loss or 5 second (5000ms) round trip
# average time to produce a critical error.
# Note: Five ICMP echo packets are sent (determined by the '-p 5' argument)

# 'check-host-alive' command definition
#define command{
 #       command_name    check-host-alive
  #      command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5
   #     }

################################################################################
#
# SAMPLE SERVICE CHECK COMMANDS
#
# These are some example service check commands.  They may or may not work on
# your system, as they must be modified for your plugins.  See the HTML
# documentation on the plugins for examples of how to configure command definitions.
#
# NOTE:  The following 'check_local_...' functions are designed to monitor
#        various metrics on the host that Nagios is running on (i.e. this one).
################################################################################

# 'check_local_disk' command definition
define command{
        command_name    check_local_disk
        command_line    $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
        }


# 'check_local_load' command definition
define command{
        command_name    check_local_load
        command_line    $USER1$/check_load -w $ARG1$ -c $ARG2$
        }


# 'check_local_procs' command definition
define command{
        command_name    check_local_procs
        command_line    $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
        }

# 'check_local_users' command definition
define command{
        command_name    check_local_users
        command_line    $USER1$/check_users -w $ARG1$ -c $ARG2$
        }


# 'check_local_swap' command definition
define command{
        command_name    check_local_swap
        command_line    $USER1$/check_swap -w $ARG1$ -c $ARG2$
        }


# 'check_local_mrtgtraf' command definition
define command{
        command_name    check_local_mrtgtraf
        command_line    $USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$
        }

################################################################################
# NOTE:  The following 'check_...' commands are used to monitor services on
#        both local and remote hosts.
################################################################################

# 'check_ftp' command definition
#define command{
 #       command_name    check_ftp
  #      command_line    $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$
   #     }


# 'check_hpjd' command definition
#define command{
 #       command_name    check_hpjd
  #      command_line    $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$
   #     }


# 'check_snmp' command definition
define command{
        command_name    check_snmp
        command_line    $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$
        }


# 'check_http' command definition
#define command{
 #       command_name    check_http
  #      command_line    $USER1$/check_http -I $HOSTADDRESS$ $ARG1$
   #     }


# 'check_ssh' command definition
#define command{
#       command_name    check_ssh
#       command_line    $USER1$/check_ssh $ARG1$ $HOSTADDRESS$
#       }


# 'check_dhcp' command definition
#define command{
#       command_name    check_dhcp
#       command_line    $USER1$/check_dhcp $ARG1$
#       }


# 'check_ping' command definition
#define command{
 #       command_name    check_ping
  #      command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5
   #     }


# 'check_pop' command definition
#define command{
 #       command_name    check_pop
  #      command_line    $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$
   #     }


# 'check_imap' command definition
#define command{
 #       command_name    check_imap
  #      command_line    $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$
   #     }


# 'check_smtp' command definition
#define command{
 #       command_name    check_smtp
  #      command_line    $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$
   #     }


# 'check_tcp' command definition
#define command{
#       command_name    check_tcp
#       command_line    $USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
#       }

# 'check_udp' command definition
#define command{
#       command_name    check_udp
#       command_line    $USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
#       }


# 'check_nt' command definition
#define command{
#       command_name    check_nt
 #       command_line    $USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
#       }

################################################################################
#
# SAMPLE PERFORMANCE DATA COMMANDS
#
# These are sample performance data commands that can be used to send performance
# data output to two text files (one for hosts, another for services).  If you
# plan on simply writing performance data out to a file, consider using the
# host_perfdata_file and service_perfdata_file options in the main config file.
#
################################################################################


# 'process-host-perfdata' command definition
define command{
        command_name    process-host-perfdata
        command_line    /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /$
        }


# 'process-service-perfdata' command definition
define command{
        command_name    process-service-perfdata
        command_line    /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVI$
        }

#define command {
 #      command_name                             check_nrpe
  #     command_line                             $USER1$/check_nrpe -H $HOSTADDRESS$ -t 30 -c $ARG1$ $ARG2$
#       }


###############################################################################
# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS
###############################################################################


################################################################################
# NOTIFICATION COMMANDS
################################################################################


# 'notify-host-by-email' command definition
define command{
        command_name    notify-host-by-email
        command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$
        }

# 'notify-service-by-email' command definition
define command{
        command_name    notify-service-by-email
        command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOST$
        }


################################################################################
# HOST CHECK COMMANDS
################################################################################

# On Debian, check-host-alive is being defined from within the
# nagios-plugins-basic package

################################################################################
# PERFORMANCE DATA COMMANDS
################################################################################
# 'process-host-perfdata' command definition
#define command{
 #       command_name    process-host-perfdata
  #      command_line    /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDA$
   #     }
# 'process-service-perfdata' command definition
#define command{
 #       command_name    process-service-perfdata
  #      command_line    /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTI$
   #     }
# 'check_equinox_http' command definition
#define command{
 #       command_name    check_equinox_http
  #      command_line    $USER1$/is_url_alive "http://$HOSTADDRESS$$ARG1$" "$ARG2$" "$ARG3$" "$ARG4$"
   #     }
#define command{
 #       command_name check_mssql
  #      command_line $USER1$/check_mssql_sproc.pl -H $HOSTADDRESS$ -p "sp_CheckCoreLastDeliveredBusHours" -u user-P "password1" -w $ARG1$ -c $ARG2$
Top
User avatar
lmiltchev
Bugs find me
Posts: 13589
Joined: Mon May 23, 2011 12:15 pm

Re: Check Windows Processes

Post by lmiltchev »

Did you also get a "duplicate" warning for "check_nrpe"? It's defined only once in the commands.cfg. Verify your config one more time and post the output:

Code: Select all

/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
Be sure to check out our Knowledgebase for helpful articles and solutions!
Top
ofadl
Posts: 201
Joined: Mon Jun 03, 2013 8:57 am

Re: Check Windows Processes

Post by ofadl »

yes i got a error for duplicate definition when i tried adding check_nrpe. The second path you listed, what is that suppose to be linked to? I might have different paths
Top
sreinhardt
-fno-stack-protector
Posts: 4366
Joined: Mon Nov 19, 2012 12:10 pm

Re: Check Windows Processes

Post by sreinhardt »

Let's do a quick check for where the other check_nrpe could be:

Code: Select all

cd /usr/local/nagios/etc
grep -Ri 'check_nrpe' ./*
Then list the output for us please.
Nagios-Plugins maintainer exclusively, unless you have other C language bugs with open-source nagios projects, then I am happy to help! Please pm or use other communication to alert me to issues as I no longer track the forum.
Top
Locked

Return to “Open Source Nagios Projects”