After installing mail
now I am getting this message but not receiving any emails.
A test email was sent to [email protected]
----
Mailer said: Message sent! (method=sendmail)
NagiosXI Monitor for WebService Application
-
phani.kolli
- Posts: 24
- Joined: Tue Nov 19, 2013 2:49 pm
Re: NagiosXI Monitor for WebService Application
Last edited by phani.kolli on Tue Dec 10, 2013 4:00 pm, edited 1 time in total.
Re: NagiosXI Monitor for WebService Application
Is the contact in question a Nagios XI user, or just a contact?
Former Nagios employee
"It is turtles. All. The. Way. Down. . . .and maybe an elephant or two."
VI VI VI - The editor of the Beast!
Come to the Dark Side.
"It is turtles. All. The. Way. Down. . . .and maybe an elephant or two."
VI VI VI - The editor of the Beast!
Come to the Dark Side.
-
phani.kolli
- Posts: 24
- Joined: Tue Nov 19, 2013 2:49 pm
Re: NagiosXI Monitor for WebService Application
Just a contact
Re: NagiosXI Monitor for WebService Application
Do you need to use smtp to send to the contact, or can your nagios sever send the mail directly?
Former Nagios employee
"It is turtles. All. The. Way. Down. . . .and maybe an elephant or two."
VI VI VI - The editor of the Beast!
Come to the Dark Side.
"It is turtles. All. The. Way. Down. . . .and maybe an elephant or two."
VI VI VI - The editor of the Beast!
Come to the Dark Side.
-
phani.kolli
- Posts: 24
- Joined: Tue Nov 19, 2013 2:49 pm
Re: NagiosXI Monitor for WebService Application
I think either one is fine with me
Re: NagiosXI Monitor for WebService Application
Well, currently you are trying to send directly through sendmail. Lets check the maillogs:
Code: Select all
tail -25 /var/log/maillogFormer Nagios employee
"It is turtles. All. The. Way. Down. . . .and maybe an elephant or two."
VI VI VI - The editor of the Beast!
Come to the Dark Side.
"It is turtles. All. The. Way. Down. . . .and maybe an elephant or two."
VI VI VI - The editor of the Beast!
Come to the Dark Side.
-
phani.kolli
- Posts: 24
- Joined: Tue Nov 19, 2013 2:49 pm
Re: NagiosXI Monitor for WebService Application
Dec 10 13:24:20 <Host Name> sendmail[31343]: rBALOKRj031343: from=xxxx@wqqwxxx, size=1858, class=0, nrcpts=1, msgid=<[email protected]>, relay=nagios@localhost
Dec 10 13:24:20 <Host Name> sendmail[31343]: rBALOKRj031343: to=IAM IDM Nagios New CIT <xxxx@wqqwxxx>, ctladdr=xxxx@wqqwxxx (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31858, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:27:40 <Host Name> sendmail[2030]: rBALReJY002030: Authentication-Warning: <Host Name>.cdbt.ssdc.kp.org: nagios set sender to xxxx@wqqwxxx using -f
Dec 10 13:27:40 <Host Name> sendmail[2030]: rBALReJY002030: from=xxxx@wqqwxxx, size=1745, class=0, nrcpts=1, msgid=<[email protected]>, relay=nagios@localhost
Dec 10 13:27:40 <Host Name> sendmail[2030]: rBALReJY002030: to=IAM IDM Nagios New CIT <xxxx@wqqwxxx>, ctladdr=xxxx@wqqwxxx (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31745, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:29:20 <Host Name> sendmail[3505]: rBALTKMG003505: Authentication-Warning: <Host Name>.cdbt.ssdc.kp.org: nagios set sender to xxxx@wqqwxxx using -f
Dec 10 13:29:20 <Host Name> sendmail[3505]: rBALTKMG003505: from=xxxx@wqqwxxx, size=1858, class=0, nrcpts=1, msgid=<[email protected]>, relay=nagios@localhost
Dec 10 13:29:20 <Host Name> sendmail[3505]: rBALTKMG003505: to=IAM IDM Nagios New CIT <xxxx@wqqwxxx>, ctladdr=xxxx@wqqwxxx (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31858, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:34:22 <Host Name> sendmail[8127]: rBALYMsV008127: Authentication-Warning: <Host Name>.cdbt.ssdc.kp.org: nagios set sender to xxxx@wqqwxxx using -f
Dec 10 13:34:22 <Host Name> sendmail[8127]: rBALYMsV008127: from=xxxx@wqqwxxx, size=1858, class=0, nrcpts=1, msgid=<[email protected]>, relay=nagios@localhost
Dec 10 13:34:22 <Host Name> sendmail[8127]: rBALYMsV008127: to=IAM IDM Nagios New CIT <xxxx@wqqwxxx>, ctladdr=xxxx@wqqwxxx (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31858, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:39:22 <Host Name> sendmail[12726]: rBALdMH0012726: Authentication-Warning: <Host Name>.cdbt.ssdc.kp.org: nagios set sender to xxxx@wqqwxxx using -f
Dec 10 13:39:22 <Host Name> sendmail[12726]: rBALdMH0012726: from=xxxx@wqqwxxx, size=1858, class=0, nrcpts=1, msgid=<[email protected]>, relay=nagios@localhost
Dec 10 13:39:22 <Host Name> sendmail[12726]: rBALdMH0012726: to=IAM IDM Nagios New CIT <xxxx@wqqwxxx>, ctladdr=xxxx@wqqwxxx (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31858, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:44:22 <Host Name> sendmail[17312]: rBALiMl6017312: Authentication-Warning: <Host Name>.cdbt.ssdc.kp.org: nagios set sender to xxxx@wqqwxxx using -f
Dec 10 13:44:22 <Host Name> sendmail[17312]: rBALiMl6017312: from=xxxx@wqqwxxx, size=1858, class=0, nrcpts=1, msgid=<[email protected]>, relay=nagios@localhost
Dec 10 13:44:22 <Host Name> sendmail[17312]: rBALiMl6017312: to=IAM IDM Nagios New CIT <xxxx@wqqwxxx>, ctladdr=xxxx@wqqwxxx (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31858, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:49:22 <Host Name> sendmail[21943]: rBALnMZj021943: Authentication-Warning: <Host Name>.cdbt.ssdc.kp.org: nagios set sender to xxxx@wqqwxxx using -f
Dec 10 13:49:22 <Host Name> sendmail[21943]: rBALnMZj021943: from=xxxx@wqqwxxx, size=1858, class=0, nrcpts=1, msgid=<[email protected]>, relay=nagios@localhost
Dec 10 13:49:22 <Host Name> sendmail[21943]: rBALnMZj021943: to=IAM IDM Nagios New CIT <xxxx@wqqwxxx>, ctladdr=xxxx@wqqwxxx (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31858, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:50:20 <Host Name> sendmail[22905]: rBALoKDv022905: from=nagios, size=430, class=0, nrcpts=1, msgid=<201312102150.rBALoKDv022905@<Host Name>.cdbt.ssdc.kp.org>, relay=nagios@localhost
Dec 10 13:50:20 <Host Name> sendmail[22905]: rBALoKDv022905: to=$, ctladdr=nagios (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30430, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:50:21 <Host Name> sendmail[22908]: rBALoLPv022908: Authentication-Warning: <Host Name>.cdbt.ssdc.kp.org: nagios set sender to xxxx@wqqwxxx using -f
Dec 10 13:50:21 <Host Name> sendmail[22908]: rBALoLPv022908: from=xxxx@wqqwxxx, size=1876, class=0, nrcpts=1, msgid=<[email protected]>, relay=nagios@localhost
Dec 10 13:50:21 <Host Name> sendmail[22908]: rBALoLPv022908: to=IAM IDM Nagios New CIT <xxxx@wqqwxxx>, ctladdr=xxxx@wqqwxxx (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31876, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:24:20 <Host Name> sendmail[31343]: rBALOKRj031343: to=IAM IDM Nagios New CIT <xxxx@wqqwxxx>, ctladdr=xxxx@wqqwxxx (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31858, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:27:40 <Host Name> sendmail[2030]: rBALReJY002030: Authentication-Warning: <Host Name>.cdbt.ssdc.kp.org: nagios set sender to xxxx@wqqwxxx using -f
Dec 10 13:27:40 <Host Name> sendmail[2030]: rBALReJY002030: from=xxxx@wqqwxxx, size=1745, class=0, nrcpts=1, msgid=<[email protected]>, relay=nagios@localhost
Dec 10 13:27:40 <Host Name> sendmail[2030]: rBALReJY002030: to=IAM IDM Nagios New CIT <xxxx@wqqwxxx>, ctladdr=xxxx@wqqwxxx (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31745, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:29:20 <Host Name> sendmail[3505]: rBALTKMG003505: Authentication-Warning: <Host Name>.cdbt.ssdc.kp.org: nagios set sender to xxxx@wqqwxxx using -f
Dec 10 13:29:20 <Host Name> sendmail[3505]: rBALTKMG003505: from=xxxx@wqqwxxx, size=1858, class=0, nrcpts=1, msgid=<[email protected]>, relay=nagios@localhost
Dec 10 13:29:20 <Host Name> sendmail[3505]: rBALTKMG003505: to=IAM IDM Nagios New CIT <xxxx@wqqwxxx>, ctladdr=xxxx@wqqwxxx (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31858, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:34:22 <Host Name> sendmail[8127]: rBALYMsV008127: Authentication-Warning: <Host Name>.cdbt.ssdc.kp.org: nagios set sender to xxxx@wqqwxxx using -f
Dec 10 13:34:22 <Host Name> sendmail[8127]: rBALYMsV008127: from=xxxx@wqqwxxx, size=1858, class=0, nrcpts=1, msgid=<[email protected]>, relay=nagios@localhost
Dec 10 13:34:22 <Host Name> sendmail[8127]: rBALYMsV008127: to=IAM IDM Nagios New CIT <xxxx@wqqwxxx>, ctladdr=xxxx@wqqwxxx (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31858, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:39:22 <Host Name> sendmail[12726]: rBALdMH0012726: Authentication-Warning: <Host Name>.cdbt.ssdc.kp.org: nagios set sender to xxxx@wqqwxxx using -f
Dec 10 13:39:22 <Host Name> sendmail[12726]: rBALdMH0012726: from=xxxx@wqqwxxx, size=1858, class=0, nrcpts=1, msgid=<[email protected]>, relay=nagios@localhost
Dec 10 13:39:22 <Host Name> sendmail[12726]: rBALdMH0012726: to=IAM IDM Nagios New CIT <xxxx@wqqwxxx>, ctladdr=xxxx@wqqwxxx (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31858, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:44:22 <Host Name> sendmail[17312]: rBALiMl6017312: Authentication-Warning: <Host Name>.cdbt.ssdc.kp.org: nagios set sender to xxxx@wqqwxxx using -f
Dec 10 13:44:22 <Host Name> sendmail[17312]: rBALiMl6017312: from=xxxx@wqqwxxx, size=1858, class=0, nrcpts=1, msgid=<[email protected]>, relay=nagios@localhost
Dec 10 13:44:22 <Host Name> sendmail[17312]: rBALiMl6017312: to=IAM IDM Nagios New CIT <xxxx@wqqwxxx>, ctladdr=xxxx@wqqwxxx (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31858, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:49:22 <Host Name> sendmail[21943]: rBALnMZj021943: Authentication-Warning: <Host Name>.cdbt.ssdc.kp.org: nagios set sender to xxxx@wqqwxxx using -f
Dec 10 13:49:22 <Host Name> sendmail[21943]: rBALnMZj021943: from=xxxx@wqqwxxx, size=1858, class=0, nrcpts=1, msgid=<[email protected]>, relay=nagios@localhost
Dec 10 13:49:22 <Host Name> sendmail[21943]: rBALnMZj021943: to=IAM IDM Nagios New CIT <xxxx@wqqwxxx>, ctladdr=xxxx@wqqwxxx (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31858, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:50:20 <Host Name> sendmail[22905]: rBALoKDv022905: from=nagios, size=430, class=0, nrcpts=1, msgid=<201312102150.rBALoKDv022905@<Host Name>.cdbt.ssdc.kp.org>, relay=nagios@localhost
Dec 10 13:50:20 <Host Name> sendmail[22905]: rBALoKDv022905: to=$, ctladdr=nagios (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30430, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Dec 10 13:50:21 <Host Name> sendmail[22908]: rBALoLPv022908: Authentication-Warning: <Host Name>.cdbt.ssdc.kp.org: nagios set sender to xxxx@wqqwxxx using -f
Dec 10 13:50:21 <Host Name> sendmail[22908]: rBALoLPv022908: from=xxxx@wqqwxxx, size=1876, class=0, nrcpts=1, msgid=<[email protected]>, relay=nagios@localhost
Dec 10 13:50:21 <Host Name> sendmail[22908]: rBALoLPv022908: to=IAM IDM Nagios New CIT <xxxx@wqqwxxx>, ctladdr=xxxx@wqqwxxx (504/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31876, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
-
slansing
- Posts: 7698
- Joined: Mon Apr 23, 2012 4:28 pm
- Location: Travelling through time and space...
Re: NagiosXI Monitor for WebService Application
It looks like you have an issue with your sendmail configuration, or the address the mail is trying to be routed to, this may be of help:
http://www.howtoforge.com/forums/showthread.php?t=16246
http://www.unixguru.biz/sendmail-statde ... by-127001/
http://www.howtoforge.com/forums/showthread.php?t=16246
http://www.unixguru.biz/sendmail-statde ... by-127001/
-
phani.kolli
- Posts: 24
- Joined: Tue Nov 19, 2013 2:49 pm
Re: NagiosXI Monitor for WebService Application
Resolved.
U guys r awesome
U guys r awesome