NRPE test ok but with args get Unknown argument -Help Please

[danielbcjr]

Hi guys,

I´m brand new about nrpe, I followed the docs about install Nagios Core and NRPE. In the nagios server, when i test the NRPE from the cliente i get:
[root@solitude ~]# /usr/local/nagios/libexec/check_nrpe -H 145.125.99.18
NRPE v2.15

But when I use commands and agrs I had that:
[root@solitude ~]# /usr/local/nagios/libexec/check_nrpe -H 145.125.99.18 -c check_disk 85% 90% /
Unknown argument
Usage:
check_disk -w limit -c limit [-W limit] [-K limit] {-p path | -x device}
[-C] [-E] [-e] [-f] [-g group ] [-k] [-l] [-M] [-m] [-R path ] [-r path ]
[-t timeout] [-u unit] [-v] [-X type] [-N type]

All the commands that I did with NRPE have the same problem.

Docs:
Solitude = Nagios Server
Winterhold = NRPE client


[root@solitude ~]# cat /usr/local/nagios/etc/servers/winterhold.cfg
define host{
name winterhold ; Name of this template
use generic-host
check_period 24x7
check_interval 1
retry_interval 1
max_check_attempts 10
check_command check-host-alive
notification_period 24x7
notification_interval 30
notification_options d,r
contact_groups admins
register 0 ; DONT REGISTER THIS - ITS A TEMPLATE
}

define host{
use linux-server ; Default values from a template
host_name winterhold ; The name we're giving to this server
alias Winterhold ; Name for the server
address 145.125.99.18 ; IP address of the server
}

define service{
use generic-service
host_name winterhold
service_description CPU CPU/Procs
check_command check_nrpe!check_procs!!40%!60%!--metric=CPU
}

define service{
use generic-service
host_name winterhold
service_description CPU Load
check_command check_nrpe!check_load!2.0,1.8,1,3!3.5,3.1,2.8
}

define service{
use generic-service
host_name winterhold
service_description Current Users
check_command check_nrpe!check_users!5!10
}

define service{
use generic-service
host_name winterhold
service_description / Free Space
check_command check_nrpe!check_disk! 20%! 10%! /
}


NRPE command in /usr/local/nagios/etc/objests/commands.cfg:
define command{
command_name check_nrpe
command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$
}






NRPE cliente (Winterhold):


command[check_users]=/usr/local/nagios/libexec/check_users -w $ARG1$ -c $ARG2$
command[check_load]=/usr/local/nagios/libexec/check_load -w $ARG1$ -c $ARG2$
command[check_disk]=/usr/local/nagios/libexec/check_disk -w$ARG1$ -c$ARG2$ -p$ARG3$
command[check_procs]=/usr/local/nagios/libexec/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$




Hekp =/

[slansing]

It is telling you that you have problems with your command's syntax. You are missing your warning and critical definitions. Try running this to start with:

Code: Select all

/usr/local/nagios/libexec/check_nrpe -H 145.125.99.18 -c check_disk

Also, you should have spaces between your $ARGn$ values, and the flags you are passing in your nrpe.cfg, this:

Code: Select all

command[check_disk]=/usr/local/nagios/libexec/check_disk -w$ARG1$ -c$ARG2$ -p$ARG3$

Should be:

Code: Select all

command[check_disk]=/usr/local/nagios/libexec/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$

I would however, recommend changing it to:

Code: Select all

command[check_disk]=/usr/local/nagios/libexec/check_disk $ARG1$

Then use the following command from the nagios server:

Code: Select all

/usr/local/nagios/libexec/check_nrpe -H 145.125.99.18 -c check_disk -a '-w 85% -c 90% -p /'

[danielbcjr]

Thank you for aswering that ^^

That is what happens:

It is telling you that you have problems with your command's syntax. You are missing your warning and critical definitions. Try running this to start with:

Code: Select all

/usr/local/nagios/libexec/check_nrpe -H 145.125.99.18 -c check_disk

Also, you should have spaces between your $ARGn$ values, and the flags you are passing in your nrpe.cfg, this:

Code: Select all

command[check_disk]=/usr/local/nagios/libexec/check_disk -w$ARG1$ -c$ARG2$ -p$ARG3$

Should be:

Code: Select all

command[check_disk]=/usr/local/nagios/libexec/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$

Fixed until now.



I would however, recommend changing it to:

Code: Select all

command[check_disk]=/usr/local/nagios/libexec/check_disk $ARG1$

Then use the following command from the nagios server:

Code: Select all

/usr/local/nagios/libexec/check_nrpe -H 145.125.99.18 -c check_disk -a '-w 85% -c 90% -p /'

I made this, but I get this in the command line:

Code: Select all

[root@solitude ~]# /usr/local/nagios/libexec/check_nrpe -H 145.125.99.18
NRPE v2.15
[root@solitude ~]# /usr/local/nagios/libexec/check_nrpe -H 145.125.99.18 -c check_disk -a '-w 85% -c 90% -p /'
CHECK_NRPE: Received 0 bytes from daemon.  Check the remote server logs for error messages.

In the Nagios page I go this in service screen:
Current Status: UNKNOWN (for 0d 1h 47m 6s)
Status Information: check_disk: Could not parse arguments
Usage:
check_disk -w limit -c limit [-W limit] [-K limit] {-p path
Performance Data: -x device} [-C] [-E] [-e] [-f] [-g group ] [-k] [-l] [-M] [-m] [-R path ] [-r path ] [-t timeout] [-u unit] [-v] [-X type] [-N type]

[danielbcjr]

Just to know, NRPE was configured with --enable-command-args and --enable-bash-command-substitution.


In nrpe.cfg of client:

dont_blame_nrpe=1
allow_bash_command_substitution=1

[lmiltchev]

CHECK_NRPE: Received 0 bytes from daemon. Check the remote server logs for error messages.

Did you check the logs? Any errors?

Can you post the "check_disk" definition from the remote box?

[danielbcjr]

CHECK_NRPE: Received 0 bytes from daemon. Check the remote server logs for error messages.

Did you check the logs? Any errors?

Can you post the "check_disk" definition from the remote box?

No error =/

Code: Select all

Feb 13 18:47:46 winterhold xinetd[8058]: EXIT: nrpe status=0 pid=8270 duration=0(sec)
Feb 13 18:48:09 winterhold xinetd[8058]: START: nrpe pid=8273 from=::ffff:189.125.66.7
Feb 13 18:48:09 winterhold nrpe[8273]: INFO: SSL/TLS initialized. All network traffic will be encrypted.
Feb 13 18:48:09 winterhold xinetd[8058]: EXIT: nrpe status=0 pid=8273 duration=0(sec)
Feb 13 18:48:11 winterhold xinetd[8058]: START: nrpe pid=8276 from=::ffff:189.125.66.7
Feb 13 18:48:11 winterhold nrpe[8276]: INFO: SSL/TLS initialized. All network traffic will be encrypted.
Feb 13 18:48:11 winterhold xinetd[8058]: EXIT: nrpe status=0 pid=8276 duration=0(sec)
Feb 13 18:48:17 winterhold xinetd[8058]: START: nrpe pid=8279 from=::ffff:189.125.66.7
Feb 13 18:48:17 winterhold nrpe[8279]: INFO: SSL/TLS initialized. All network traffic will be encrypted.
Feb 13 18:48:17 winterhold xinetd[8058]: EXIT: nrpe status=0 pid=8279 duration=0(sec)

This way:

Code: Select all

command[check_users]=/usr/local/nagios/libexec/check_users -w $ARG1$ -c $ARG2$
command[check_load]=/usr/local/nagios/libexec/check_load -w $ARG1$ -c $ARG2$
command[check_disk]=/usr/local/nagios/libexec/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
command[check_procs]=/usr/local/nagios/libexec/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$

I tried too the slansing way:

Code: Select all

command[check_disk]=/usr/local/nagios/libexec/check_disk $ARG1$

[lmiltchev]

Use the command, provided by slansing:

Code: Select all

command[check_disk]=/usr/local/nagios/libexec/check_disk $ARG1$

Restart nrpe.

Code: Select all

/etc/init.d/nagios-nrpe-server restart

Note: This may vary, depending on your system...

Test the check by running the following command on the nagios server:

Code: Select all

./check_nrpe -H <client ip> -c check_disk -a '-w 20% -c 10% -p /

If this fails, try:

Code: Select all

./check_nrpe -H <client ip> -n -c check_disk -a '-w 20% -c 10% -p /

[danielbcjr]

Hi lmiltchev

Tahnk you for helping.

Use the command, provided by slansing:

Code: Select all

command[check_disk]=/usr/local/nagios/libexec/check_disk $ARG1$

DONE

Restart nrpe.

Code: Select all

/etc/init.d/nagios-nrpe-server restart

Mine is:

Code: Select all

 /etc/init.d/xinetd restart

DONE


Note: This may vary, depending on your system...

Test the check by running the following command on the nagios server:

Code: Select all

./check_nrpe -H <client ip> -c check_disk -a '-w 20% -c 10% -p /

Reply:

Code: Select all

[root@solitude etc]# /usr/local/nagios/libexec/check_nrpe -H 189.125.66.9 -c check_disk -a '-w 20% -c 10% -p /'
CHECK_NRPE: Received 0 bytes from daemon.  Check the remote server logs for error messages.

If this fails, try:

Code: Select all

./check_nrpe -H <client ip> -n -c check_disk -a '-w 20% -c 10% -p /

Reply:

Code: Select all

[root@solitude etc]# /usr/local/nagios/libexec/check_nrpe -H 189.125.66.9 -c -n check_disk -a '-w 20% -c 10% -p /'
CHECK_NRPE: Received 0 bytes from daemon.  Check the remote server logs for error messages.

=/

[tmcdonald]

Test the check by running the following command on the nagios server:

Code: Select all

./check_nrpe -H <client ip> -c check_disk -a '-w 20% -c 10% -p /

If this fails, try:

Code: Select all

./check_nrpe -H <client ip> -n -c check_disk -a '-w 20% -c 10% -p /

I think lmiltchev might have missed an ending quote. Try this:

Test the check by running the following command on the nagios server:

Code: Select all

./check_nrpe -H <client ip> -c check_disk -a '-w 20% -c 10% -p /'

If this fails, try:

Code: Select all

./check_nrpe -H <client ip> -n -c check_disk -a '-w 20% -c 10% -p /'

[danielbcjr]

That are the results:

Code: Select all

[root@solitude libexec]# ./check_nrpe -H 189.125.66.9 -c check_disk -a '-w 20% -c 10% -p /'
CHECK_NRPE: Received 0 bytes from daemon.  Check the remote server logs for error messages.
[root@solitude libexec]# ./check_nrpe -H <client ip> -n -c check_disk -a '-w 20% -c 10% -p /'
-bash: client: No such file or directory