Re: [Nagios-devel] nagios silently stops

Support forum for Nagios Core, Nagios Plugins, NCPA, NRPE, NSCA, NDOUtils and more. Engage with the community of users including those using the open source solutions.
Locked
Guest

Re: [Nagios-devel] nagios silently stops

Post by Guest »

---moq1144046473182d1cabf4c48b4bcecefc934361e0aa
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

A have switched flapping detection off and after that nagios works=0Ajust f=
ine.=0A Quoting Ton Voon : On 31 Mar 2006, at 10:06, Vadim Korsak wrote:=
=0A Nagios 2.1 have stopped some times. Last entry in log till it stops =0A=
=0A - SERVICE FLAPPING ALERT:=0A grep -B 1 "2.1 starting..." /var/log/nagio=
s/nagios.log=0A [1143723946] SERVICE FLAPPING ALERT: _net-n-liepaja-srv;DIS=
K C: =0A free space;STARTED; Service appears to have started flapping (20.=
5% =0A=0A change >=3D 20.0% threshold)=0A [1143790405] Nagios 2.1 starting.=
.. (PID=3D6671)=0A --=0A [1143792340] SERVICE FLAPPING ALERT: _net-n-liepaj=
a-srv;DISK C: =0A free space;STARTED; Service appears to have started flap=
ping (21.1% =0A=0A change >=3D 20.0% threshold)=0A [1143792757] Nagios 2.1 =
starting... (PID=3D11656)=0A --=0A [1143793487] SERVICE FLAPPING ALERT: _ne=
t-n-liepaja-srv;DISK C: =0A free space;STARTED; Service appears to have st=
arted flapping (21.6% =0A=0A change >=3D 20.0% threshold)=0A [1143793561] N=
agios 2.1 starting... (PID=3D24024)=0A --=0A [1143794252] SERVICE FLAPPING =
ALERT: _net-n-liepaja-gw;PING =0A gateway;STARTED; Service appears to have=
started flapping (24.2% =0A change >=3D 20.0% threshold)=0A [1143794282] =
Nagios 2.1 starting... (PID=3D2723)=0A --=0A [1143795613] SERVICE FLAPPING =
ALERT: _net-n-liepaja-srv;DISK C: =0A free space;STARTED; Service appears =
to have started flapping (21.3% =0A=0A change >=3D 20.0% threshold)=0A [114=
3795722] Nagios 2.1 starting... (PID=3D27191)=0A Nagios itself starts flapp=
ing ;)=0A Vadim,=0A Which platform are you running on? Which configure opti=
ons did you =0A build with?=0A When it happens again, can you send a pstre=
e output (want to see if =0A=0A nagios has forked other processes - maybe h=
anging on an external =0A command). For each nagios process, can you run a=
n strace to see what=0A =0A bit of the code it is currently hanging on.=0A =
Ton=0A http://www.altinity.com=0A T: +44 (0)870 787 9243=0A F: +44 (0)845 2=
80 1725=0A Skype: tonvoon=0A =0A=0ALinks:=0A------=0A[1] mailto:ton.voon@a=
ltinity.com=0A
---moq1144046473182d1cabf4c48b4bcecefc934361e0aa
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

A have switched flapping detection off and after that nagios works just fin=
e.

Quoting Ton Voon <[email protected]>:=
On 31 Mar 2006, at 10:06, Vadim =
Korsak wrote:

Nagios 2.1 h=
ave stopped some times. Last entry in log till it stops
- SERVICE F=
LAPPING ALERT:

grep -B 1 "2.1 starting..." /var/log/=
nagios/nagios.log
[1143723946] SERVICE FLAPPING ALERT: _net-n-liepaja=
-srv;DISK C:
free space;STARTED; Service appears to have started fl=
apping (20.5%
change >=3D 20.0% threshold)
[1143790405] Na=
gios 2.1 starting... (PID=3D6671)
--
[1143792340] SERVICE FLAPP=
ING ALERT: _net-n-liepaja-srv;DISK C:
free space;STARTED; Service a=
ppears to have started flapping (21.1%
change >=3D 20.0% thresho=
ld)
[1143792757] Nagios 2.1 starting... (PID=3D11656)
--
=
[1143793487] SERVICE FLAPPING ALERT: _net-n-liepaja-srv;DISK C:
fre=
e space;STARTED; Service appears to have started flapping (21.6%
ch=
ange >=3D 20.0% threshold)
[1143793561] Nagios 2.1 starting... (PI=
D=3D24024)
--
[1143794252] SERVICE FLAPPING ALERT: _net-n-liepa=
ja-gw;PING
gateway;STARTED; Service appears to have started flappin=
g (24.2%
change >=3D 20.0% threshold)
[1143794282] Nagios =
2.1 starting... (PID=3D2723)


...[email truncated]...


This post was automatically imported from historical nagios-devel mailing list archives
Original poster: [email protected]
Locked