Nagios Support Forum

Hi All,

Can some one help me as below

I would like to configure in nagios to display the Storage disk utilization as well graphs.

My environment as below

Nagios server is Debian linux
Nagios version :Nagios® Core™
Version 3.2.1

Thanks
Murali

Do you already have a graphing addon installed and set up such as pnp4nagios?:

http://docs.pnp4nagios.org/

If not, you will need to set that up, or use nagiosgraph which may be already installed.

I would start by adding the host, and the service you are trying to monitor. What type of system are you trying to monitor the disk metrics on, depending on this, you will be able to follow the "How to Monitor -----" sections in this contents page:

http://nagios.sourceforge.net/docs/3_0/toc.html

Hi,

I already configured HP 3par storage and monitoring and working fine.
I would like to see physical data performance(status :in terms of utilization)


Thanks
Murali Muppa

What type of physical data performance?

Throughput, iops, latency, storage capacity utilization? Many of these can probably queried by utilizing SNMP requests to gather the data using check_snmp and routed back through pnp4nagios to generate graphs.

There may even be a plugin designed for your storage in particular. I was surprised with the availability of information on the storage systems I utilize.

Jesse

All very valid questions, let us know Murali, we're glad to help. I'd recommend taking a look at the first half of my initial reply, since it seems like you may have missed it.

Hi Slansing,

I have already monitoring few storage devices like ping response,EVA controllers ,However would like to monitor storage capacity utilization.

I am not aware PNP4nagios.

Thanks
Murali Muppa

If you are not familiar with it, go look at the link that I attached in my first post. Let us know if you have questions, I'd recommend using PNP4Nagios, it is quite reliable and does not have too steep of a learning curve.

I have already nagios core 3.2 version configured few storage devices,however is pnp4nagios will change whole environment.

Would you please help me to configure nagios core 3.2 version.

That is quite a broad question, we really need more specifics from you in your questions...

PNP4Nagios will set up performance data handling for your checks, which will in turn display them on graphs if set up properly, that is all well documented in the link I sent you.

Would you please help me to configure nagios core 3.2 version.

Once again, extremely broad... I highly recommend reading through these tutorials based on what you are doing:

http://nagios.sourceforge.net/docs/3_0/toc.html

When you run into problems we can help you out.

HI Slansing,

I have configured pnp nogais and i have compiled ,updated & restarted.

When i refresh and checked it Nagios browser and as i got a below error

Please check the documentation for information about the following error.

XML file "/var/lib/pnp4nagios/perfdata/hp-eva-01/EVA_Disks_Status.xml" not found. Read FAQ online


Not found the EVA_Disks_Status.xml is there any chance to generate this file.

Thanks
Murali Muppa