Nagios 2014 XI R 1.0

[costanza2k1]

When doing a verify I get this:

Code: Select all

Website: http://www.nagios.org 
Reading configuration data... 
Warning: use_embedded_perl_implicitly is deprecated and will be removed. 
Warning: sleep_time is deprecated and will be removed. 
Warning: p1_file is deprecated and will be removed. 
Warning: external_command_buffer_slots is deprecated and will be removed. All commands are always processed upon arrival 
Warning: enable_embedded_perl is deprecated and will be removed. 
Warning: command_check_interval is deprecated and will be removed. Commands are always handled on arrival 
Read main config file okay... 
Warning: failure_prediction_enabled is obsoleted and no longer has any effect in host type objects (config file '/usr/local/nagios/etc/hosttemplates.cfg', starting at line 14) 
Warning: failure_prediction_enabled is obsoleted and no longer has any effect in host type objects (config file '/usr/local/nagios/etc/hosttemplates.cfg', starting at line 136) 
Warning: failure_prediction_enabled is obsoleted and no longer has any effect in service type objects (config file '/usr/local/nagios/etc/servicetemplates.cfg', starting at line 14) 
Warning: failure_prediction_enabled is obsoleted and no longer has any effect in service type objects (config file '/usr/local/nagios/etc/servicetemplates.cfg', starting at line 117) 
Read object config files okay... 

Any suggestions on how to clear out these failures, when I clear them out from the .cfg file it seems as if the come right back and in correlation the monitoring engine resets itself. Your help is appreciated.

[abrist]

Did the upgrade run successfully? These deprecated options should have been removed by the sql.

[costanza2k1]

It ran succesfully with no issues. I'm noticing the monitoring engine restarting itself every few minutes now. Do you recommend I run the upgrade again?

[lmiltchev]

Yes, you can run the upgrade again - it won't hurt anything. Do you see "Nagios XI 2014R1.0" on the bottom of the page? Any oddities on the "Monitoring Process" page (Home->Process Info)?

[costanza2k1]

It does have Nagios XI 2014R1.0, the Monitoring Process is resetting itself every 2-7 minutes...

[lmiltchev]

Did you try rerunning the upgrade?

[costanza2k1]

Did you try rerunning the upgrade?

no we didn't but we removed those entries manually...showing zero errors now.

Code: Select all

Nagios Core 4.0.5 
Copyright (c) 2009-present Nagios Core Development Team and Community Contributors 
Copyright (c) 1999-2009 Ethan Galstad 
Last Modified: 04-11-2014 
License: GPL 

Website: http://www.nagios.org 
Reading configuration data... 
Read main config file okay... 
Read object config files okay... 

Running pre-flight check on configuration data... 

Checking objects... 
Checked 1324 services. 
Checked 179 hosts. 
Checked 137 host groups. 
Checked 2 service groups. 
Checked 41 contacts. 
Checked 4 contact groups. 
Checked 113 commands. 
Checked 47 time periods. 
Checked 0 host escalations. 
Checked 0 service escalations. 
Checking for circular paths... 
Checked 179 hosts 
Checked 0 service dependencies 
Checked 0 host dependencies 
Checked 47 timeperiods 
Checking global event handlers... 
Checking obsessive compulsive processor commands... 
Checking misc settings... 

Total Warnings: 0 
Total Errors: 0 

Things look okay - No serious problems were detected during the pre-flight check 

keeping an eye on the monitoring engine process now. I'll keep you guys posted.

[tmcdonald]

We'll keep this open for a week or so.

[costanza2k1]

Just a follow up here, I ended up running the upgrade again on Friday and the engine has been stable ever since...

[slansing]

Excellent... we will keep this open a bit longer, let us know if you start to see issues...