VMware config wizard in nagios XI
Posted: Mon Jun 13, 2016 5:43 pm
Hi,
The wizard for vmware discovers all guests correctly.
When trying to apply the config, it fails with this msg:
Already tried:
* run /usr/local/nagiosxi/scripts/reset_config_perms.sh
=> no visible result, config wizard presenting above result was run after the reset_config_perms.sh
* tried dumping all files & rebuilding via CCM
=> no change
Where can I find info / logs to point me how to fix this?
Thanks,
Piet
The wizard for vmware discovers all guests correctly.
When trying to apply the config, it fails with this msg:
Code: Select all
Configurations failed to write to file.
Configuration Error
An error occurred while attempting to apply your configuration to the monitoring engine. Contact your Nagios administrator if this problem persists.* run /usr/local/nagiosxi/scripts/reset_config_perms.sh
=> no visible result, config wizard presenting above result was run after the reset_config_perms.sh
* tried dumping all files & rebuilding via CCM
=> no change
Where can I find info / logs to point me how to fix this?
Thanks,
Piet