Page 1 of 1

Yum update fails

Posted: Wed Jul 27, 2016 7:16 am
by glitchcowboy
Nagios XI on RHEL7.
2 Issues.
1: With nagios-7.repo in /etc/yum.repos.d,

Code: Select all

yum update
fails like this:

Code: Select all

nagios-base/primary            FAILED                                          
http://repo.nagios.com/nagios/7/repodata/8881a54830935071d84a1c8e43c626857133d0b7182268d847a411b5c4dd12e8-primary.xml.gz: [Errno 12] Timeout on http://repo.nagios.com/nagios/7/repodata/8881a54830935071d84a1c8e43c626857133d0b7182268d847a411b5c4dd12e8-primary.xml.gz: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
nagiosxi-deps/primary          FAILED                                          
http://repo.nagios.com/nagiosxi-deps/7/repodata/fc575084d092cdc3a4c223f7e94b71e1eb7d4944f82793f9ba306c31cae7f6aa-primary.xml.gz: [Errno 12] Timeout on http://repo.nagios.com/nagiosxi-deps/7/repodata/fc575084d092cdc3a4c223f7e94b71e1eb7d4944f82793f9ba306c31cae7f6aa-primary.xml.gz: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
nagios-base/primary            FAILED                                          
http://repo.nagios.com/nagios/7/repodata/8881a54830935071d84a1c8e43c626857133d0b7182268d847a411b5c4dd12e8-primary.xml.gz: [Errno 12] Timeout on http://repo.nagios.com/nagios/7/repodata/8881a54830935071d84a1c8e43c626857133d0b7182268d847a411b5c4dd12e8-primary.xml.gz: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
etc...

Yes, I'm behind a proxy, yes, repo.nagios.com is bypassed from filtering/decryption at the proxy

2: I thought I'd bypass this and just mirror the repo in Satellite. But Satellite syncing errors out with:

Code: Select all

Yum Metadata: CRC check failed 0x3c375ed8 != 0xaed64c1cL 

Re: Yum update fails

Posted: Wed Jul 27, 2016 11:35 am
by lmiltchev
Try running the following commands to see if this is going to fix the issue:

Code: Select all

yum clean all
rm -rf /var/cache/yum/*
yum update

Re: Yum update fails

Posted: Wed Jul 27, 2016 11:41 am
by glitchcowboy
No Change:
It starts and then slows down so much as to not work at all. Is yum an appropriate way to update nagios XI or just through the web UI?

Code: Select all


nagios-base/primary            FAILED                                                 99% [==========================================================================-] 2.8 kB/s |  25 MB  00:00:45 ETA 
http://repo.nagios.com/nagios/7/repodata/8881a54830935071d84a1c8e43c626857133d0b7182268d847a411b5c4dd12e8-primary.xml.gz: [Errno 12] Timeout on http://repo.nagios.com/nagios/7/repodata/8881a54830935071d84a1c8e43c626857133d0b7182268d847a411b5c4dd12e8-primary.xml.gz: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
nagiosxi-deps/primary          FAILED                                          
http://repo.nagios.com/nagiosxi-deps/7/repodata/fc575084d092cdc3a4c223f7e94b71e1eb7d4944f82793f9ba306c31cae7f6aa-primary.xml.gz: [Errno 12] Timeout on http://repo.nagios.com/nagiosxi-deps/7/repodata/fc575084d092cdc3a4c223f7e94b71e1eb7d4944f82793f9ba306c31cae7f6aa-primary.xml.gz: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
epel/x86_64/updateinfo         FAILED                                                 99% [==========================================================================-]  0.0 B/s |  25 MB  --:--:-- ETA 
http://mirrors.rit.edu/fedora/epel/7/x86_64/repodata/31b8ad7f35f59313d29864411ab85cd687a318e61ded69e258d4d3421abb975e-updateinfo.xml.bz2: [Errno 12] Timeout on http://mirrors.rit.edu/fedora/epel/7/x86_64/repodata/31b8ad7f35f59313d29864411ab85cd687a318e61ded69e258d4d3421abb975e-updateinfo.xml.bz2: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
nagios-base/primary            FAILED                                          
http://repo.nagios.com/nagios/7/repodata/8881a54830935071d84a1c8e43c626857133d0b7182268d847a411b5c4dd12e8-primary.xml.gz: [Errno 12] Timeout on http://repo.nagios.com/nagios/7/repodata/8881a54830935071d84a1c8e43c626857133d0b7182268d847a411b5c4dd12e8-primary.xml.gz: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
nagiosxi-deps/primary          FAILED                                          
http://repo.nagios.com/nagiosxi-deps/7/repodata/fc575084d092cdc3a4c223f7e94b71e1eb7d4944f82793f9ba306c31cae7f6aa-primary.xml.gz: [Errno 12] Timeout on http://repo.nagios.com/nagiosxi-deps/7/repodata/fc575084d092cdc3a4c223f7e94b71e1eb7d4944f82793f9ba306c31cae7f6aa-primary.xml.gz: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
^C

Re: Yum update fails

Posted: Wed Jul 27, 2016 4:04 pm
by ssax
What does this output?

Code: Select all

wget 'http://repo.nagios.com/nagios/7/repodata/8881a54830935071d84a1c8e43c626857133d0b7182268d847a411b5c4dd12e8-primary.xml.gz'
Here's mine:

Code: Select all

[root@centos72 ~]# wget 'http://repo.nagios.com/nagios/7/repodata/8881a54830935071d84a1c8e43c626857133d0b7182268d847a411b5c4dd12e8-primary.xml.gz'
--2016-07-27 16:02:39--  http://repo.nagios.com/nagios/7/repodata/8881a54830935071d84a1c8e43c626857133d0b7182268d847a411b5c4dd12e8-primary.xml.gz
Resolving repo.nagios.com (repo.nagios.com)... 72.14.181.71, 2600:3c00::f03c:91ff:fedf:b821
Connecting to repo.nagios.com (repo.nagios.com)|72.14.181.71|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 8605 (8.4K) [application/x-gzip]
Saving to: ‘8881a54830935071d84a1c8e43c626857133d0b7182268d847a411b5c4dd12e8-primary.xml.gz.1’

100%[======================================>] 8,605       --.-K/s   in 0.001s

2016-07-27 16:02:40 (5.70 MB/s) - ‘8881a54830935071d84a1c8e43c626857133d0b7182268d847a411b5c4dd12e8-primary.xml.gz.1’ saved [8605/8605]
Can you validate with your proxy admins that it is actually being bypassed? It kind of looks like something is blocking it.

Re: Yum update fails

Posted: Wed Jul 27, 2016 4:24 pm
by glitchcowboy
Interesting... It's going 95% and hanging. It must be my side.

Code: Select all

# wget 'http://repo.nagios.com/nagios/7/repodata/8881a54830935071d84a1c8e43c626857133d0b7182268d847a411b5c4dd12e8-primary.xml.gz'
--2016-07-27 16:23:57--  http://repo.nagios.com/nagios/7/repodata/8881a54830935071d84a1c8e43c626857133d0b7182268d847a411b5c4dd12e8-primary.xml.gz
Resolving repo.nagios.com (repo.nagios.com)... 72.14.181.71, 2600:3c00::f03c:91ff:fedf:b821
Connecting to repo.nagios.com (repo.nagios.com)|72.14.181.71|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 8605 (8.4K) [application/x-gzip]
Saving to: ‘8881a54830935071d84a1c8e43c626857133d0b7182268d847a411b5c4dd12e8-primary.xml.gz’

91% [=========================================================================================>         ] 7,880       --.-K/s  eta 2s     

Re: Yum update fails

Posted: Wed Jul 27, 2016 4:31 pm
by bwallace
Yeah I'd double check that proxy - seems like might it be scanning the content and it's taking to long, or of course high network latency. Definitely let us know what you find out.